commit | 2d30a28b91389e677253095cb8dfdd34a298c14a | [log] [tgz] |
---|---|---|
author | Zane Shelley <zshelle@us.ibm.com> | Fri Jun 04 13:21:46 2021 -0500 |
committer | Zane Shelley <zshelle@us.ibm.com> | Fri Jun 04 14:00:56 2021 -0500 |
tree | 4255cd5a880e9c8ac652aded4b9742afa8c4368c | |
parent | 738276af00c74b57e1bd1c91b76d917066fcdea1 [diff] |
setuptools for openpower-hw-diags PEL parser data This repo currently contains the chip data files used for isolation. These data files will also be used for creating data files for the openpower-hw-diags PEL parsers. This commit includes the necessary setuptools files to install the PEL parser data in the appropriate python modules. Signed-off-by: Zane Shelley <zshelle@us.ibm.com> Change-Id: Id93a56748b12aa0c3ce9a286324a952779d7041b
This library is a common, portable code base for isolating errors reported by hardware registers on POWER Systems chips.
The primary consumers (and requirements drivers) will be:
See the primary API definitions for details on how to use this library.
This library can be integrated into a user application's source (either imported, or as a git subtree/submodule) or built as static library.
__HEI_ENABLE_HW_WRITE
: When defined, it will allow hardware write support. Note that the Chip Data Files will contain rules for clearing and masking register bits. Both of which will require modifying hardware registers, which is not allowed by user applications like OpenBMC or FSP firmware.src/include/
in the POWER Systems Hostboot firmware.For a standard OpenBMC release build, you want something like:
meson -Dtests=disabled <build_dir> ninja -C <build_dir> ninja -C <build_dir> install
For a test / debug build, a typical configuration is:
meson -Dtests=enabled <build_dir> ninja -C <build_dir> test