commit | c928f940b049f1efee32c0e47214943bedc03bc9 | [log] [tgz] |
---|---|---|
author | Zane Shelley <zshelle@us.ibm.com> | Fri Jul 09 14:32:58 2021 -0500 |
committer | Zane Shelley <zshelle@us.ibm.com> | Fri Jul 16 13:37:52 2021 -0500 |
tree | d1c3343d5e677dfa8166ed860f3ae2a67844a0d7 | |
parent | fe678be40f90796819b1017022e70c8d07a1ab70 [diff] |
Add OMI_DL_ERROR_HOLD to chip data XML There is one for P10 and another for Explorer, with very similar patterns. Signed-off-by: Zane Shelley <zshelle@us.ibm.com> Change-Id: Ied70efd56ee09d8925480aebee52b0bf1b328a70
This library is a common, portable code base for isolating errors reported by hardware registers on POWER Systems chips.
The primary consumers (and requirements drivers) will be:
See the primary API definitions for details on how to use this library.
This library can be integrated into a user application's source (either imported, or as a git subtree/submodule) or built as static library.
__HEI_ENABLE_HW_WRITE
: When defined, it will allow hardware write support. Note that the Chip Data Files will contain rules for clearing and masking register bits. Both of which will require modifying hardware registers, which is not allowed by user applications like OpenBMC or FSP firmware.src/include/
in the POWER Systems Hostboot firmware.For a standard OpenBMC release build, you want something like:
meson -Dtests=disabled <build_dir> ninja -C <build_dir> ninja -C <build_dir> install
For a test / debug build, a typical configuration is:
meson -Dtests=enabled <build_dir> ninja -C <build_dir> test