commit | dae1af64b042a52b3114bd2b0f87302833cee2e5 | [log] [tgz] |
---|---|---|
author | Zane Shelley <zshelle@us.ibm.com> | Thu Jan 14 11:00:46 2021 -0600 |
committer | Zane Shelley <zshelle@us.ibm.com> | Thu Jan 14 13:16:09 2021 -0600 |
tree | dfd0587fe98be8e630e3ac4b4a190f6f675b99f8 | |
parent | d507351381a58a0c663e9ef65e6a46c50ca55cc6 [diff] |
Add register dump to isolation data Signed-off-by: Zane Shelley <zshelle@us.ibm.com> Change-Id: I02dc9ff21e538a8d6d66663bc0ecd07362a5332b
This library is a common, portable code base for isolating errors reported by hardware registers on POWER Systems chips.
The primary consumers (and requirements drivers) will be:
See the primary API definitions for details on how to use this library.
This library can be integrated into a user application's source (either imported, or as a git subtree/submodule) or built as static library.
__HEI_ENABLE_HW_WRITE
: When defined, it will allow hardware write support. Note that the Chip Data Files will contain rules for clearing and masking register bits. Both of which will require modifying hardware registers, which is not allowed by user applications like OpenBMC or FSP firmware.src/include/
in the POWER Systems Hostboot firmware.For a standard OpenBMC release build, you want something like:
meson -Dtests=disabled <build_dir> ninja -C <build_dir> ninja -C <build_dir> install
For a test / debug build, a typical configuration is:
meson -Dtests=enabled <build_dir> ninja -C <build_dir> test