diff --git a/meson.build b/meson.build
new file mode 100644
index 0000000..453fef2
--- /dev/null
+++ b/meson.build
@@ -0,0 +1,166 @@
+project(
+    'openpower-occ-control', 'cpp',
+    version : '1.0.0',
+    meson_version: '>=0.57.0',
+    default_options: [
+        'warning_level=3',
+        'werror=true',
+        'cpp_std=c++20',
+        'buildtype=debugoptimized'
+    ]
+)
+
+conf_data = configuration_data()
+conf_data.set_quoted('OCC_CONTROL_BUSNAME', 'org.open_power.OCC.Control')
+conf_data.set_quoted('OCC_CONTROL_ROOT', '/org/open_power/control')
+conf_data.set_quoted('OCC_SENSORS_ROOT', '/xyz/openbmc_project/sensors')
+conf_data.set_quoted('CPU_NAME', 'cpu')
+conf_data.set_quoted('OCC_NAME', 'occ')
+conf_data.set_quoted('OCC_MASTER_NAME', 'occ-hwmon.1')
+conf_data.set_quoted('OCC_DEV_PATH', '/dev/occ')
+conf_data.set_quoted('CPU_SUBPATH', '/xyz/openbmc_project/inventory/system/chassis/motherboard')
+
+conf_data.set('MAX_CPUS', get_option('max-cpus'))
+conf_data.set('OCC_CPU_TEMP_SENSOR_TYPE', 0xC0)
+conf_data.set('OCC_DIMM_TEMP_SENSOR_TYPE', 0xD0)
+conf_data.set('PS_DERATING_FACTOR', 90)
+
+if get_option('i2c-occ').enabled()
+    conf_data.set_quoted('OCC_HWMON_PATH', '/sys/bus/i2c/drivers/occ-hwmon/')
+    conf_data.set_quoted('DEV_PATH', '/sys/bus/i2c/devices')
+    conf_data.set_quoted('I2C_OCC_DEVICE_NAME', 'p8-occ-hwmon')
+else
+    conf_data.set_quoted('OCC_HWMON_PATH', '/sys/bus/platform/drivers/occ-hwmon/')
+    conf_data.set_quoted('DEV_PATH', '/sys/bus/platform/devices/')
+endif
+
+if get_option('install-error-yaml').disabled()
+    conf_data.set('I2C_OCC', get_option('i2c-occ').enabled())
+    conf_data.set('READ_OCC_SENSORS', get_option('read-occ-sensors').enabled())
+    conf_data.set('PLDM', get_option('with-host-communication-protocol')=='pldm')
+    conf_data.set('POWER10', get_option('power10-support').enabled())
+endif
+
+configure_file(output: 'config.h',
+    configuration: conf_data
+)
+
+sdbusplusplus_prog = find_program('sdbus++')
+sdbuspp_gen_meson_prog = find_program('sdbus++-gen-meson')
+python_prog = find_program('python3', required: true)
+realpath_prog = find_program('realpath')
+
+selected_subdirs = []
+selected_subdirs += 'org/open_power/OCC'
+
+generated_root = meson.current_build_dir() / 'gen'
+generated_others = []
+generated_sources = []
+
+# Source the generated meson files.
+subdir('gen')
+foreach d : selected_subdirs
+  subdir('gen' / d)
+endforeach
+
+# Parse through the list from sdbus++-gendir and put into sets.
+generated_headers = []
+generated_cpp = []
+generated_others_files = []
+
+foreach g : generated_sources generated_others
+    foreach f : g.to_list()
+        rel_path = run_command(
+            realpath_prog,
+            '--relative-to', generated_root,
+            f.full_path(),
+        ).stdout().strip().split('\n')[-1]
+
+        if rel_path.endswith('.hpp')
+            generated_headers += rel_path
+        elif rel_path.endswith('.cpp')
+            generated_cpp += rel_path
+        else
+            generated_others_files += rel_path
+        endif
+    endforeach
+endforeach
+
+deps = []
+sources = []
+if get_option('install-error-yaml').disabled()
+    sdbusplus_dep = dependency('sdbusplus')
+    sdeventplus_dep = dependency('sdeventplus')
+    phosphor_logging_dep = dependency('phosphor-logging')
+    phosphor_dbus_interfaces_dep = dependency('phosphor-dbus-interfaces')
+
+    deps += [
+        sdbusplus_dep,
+        sdeventplus_dep,
+        phosphor_logging_dep,
+        phosphor_dbus_interfaces_dep,
+    ]
+
+    sources += [
+        'app.cpp',
+        'occ_pass_through.cpp',
+        'occ_manager.cpp',
+        'occ_status.cpp',
+        'occ_device.cpp',
+        'occ_errors.cpp',
+        'occ_presence.cpp',
+        'occ_command.cpp',
+        'occ_dbus.cpp',
+        'powercap.cpp',
+        'i2c_occ.cpp',
+        'utils.cpp',
+    ]
+
+    if get_option('with-host-communication-protocol')=='pldm'
+        libpldm_dep = dependency('libpldm')
+        deps += [
+            libpldm_dep,
+        ]
+        sources += [
+            'pldm.cpp',
+        ]
+    endif
+
+    if get_option('power10-support').enabled()
+        sources += [
+            'powermode.cpp',
+        ]
+    endif
+
+    yamldir = get_option('yamldir')
+    if yamldir == ''
+        yamldir = meson.project_source_root() / 'example/occ_sensor.yaml'
+    endif
+
+    # Generate occ-sensor.hpp.
+    occ_sensor_hpp = custom_target(
+        'occ-sensor.hpp',
+        command : [
+            python_prog,
+            meson.project_source_root() + '/sensor_gen.py',
+            '-f', meson.project_source_root() / yamldir,
+            '-i', meson.current_build_dir(),
+        ],
+        output : 'occ-sensor.hpp')
+    sources += [occ_sensor_hpp]
+
+    executable(
+        'openpower-occ-control',
+        sources,
+        generated_sources,
+        include_directories: ['.', 'gen'],
+        implicit_include_directories: true,
+        dependencies: deps,
+        install: true,
+        install_dir: get_option('bindir')
+    )
+endif
+
+if not get_option('tests').disabled()
+  subdir('test')
+endif