Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / owners-plugin-test / 0d1a95d5119c1cb0b4834d3349225566a0ca5570
commit0d1a95d5119c1cb0b4834d3349225566a0ca5570[log] [tgz]
authorMatt Spinler <spinler@us.ibm.com>Mon May 07 11:31:57 2018 -0500
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Tue May 22 00:47:53 2018 +0000
tree1d3f83d8ac4a81ec5ba43e2b1ff6b99d82720e44
parent82ba4460376ce93037eacd69953d129ca6abb39f [diff]
wspoon: Copy in the MAX31785 hwmon config file

The code will now copy the correct air or water cooled
config file to the correct name so phosphor-hwmon can find it.

It was just a link before, but that would cause problems with
code updates as this directory is preserved, so if older
code was put back on the link would point to nothing and
phosphor-hwmon would never start for the MAX31785.

Now with the copy the old code can still pick up this file.

The only hole this has is if someone goes from the new code
back to the old code, and then swaps air/water cooling, as the
old code will then pick up the config file generated by the
newer code, which now won't match the actual config.  This
would be a very unlikely scenario.

Change-Id: I45db3c3ac8265caae30163a4e90035189e861e82
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
1 file changed
tree: 1d3f83d8ac4a81ec5ba43e2b1ff6b99d82720e44
  1. import-layers/
  2. meta-openbmc-bsp/
  3. meta-openbmc-machines/
  4. meta-phosphor/
  5. bitbake ⇨ import-layers/yocto-poky/bitbake
  6. documentation ⇨ import-layers/yocto-poky/documentation
  7. LICENSE ⇨ import-layers/yocto-poky/LICENSE
  8. meta ⇨ import-layers/yocto-poky/meta
  9. meta-poky ⇨ import-layers/yocto-poky/meta-poky
  10. meta-selftest ⇨ import-layers/yocto-poky/meta-selftest
  11. meta-skeleton ⇨ import-layers/yocto-poky/meta-skeleton
  12. meta-yocto-bsp ⇨ import-layers/yocto-poky/meta-yocto-bsp
  13. oe-init-build-env ⇨ import-layers/yocto-poky/oe-init-build-env
  14. oe-init-build-env-memres ⇨ import-layers/yocto-poky/oe-init-build-env-memres
  15. scripts ⇨ import-layers/yocto-poky/scripts
  16. .gitignore
  17. .gitreview
  18. .templateconf
  19. openbmc-env
  20. README.md
  21. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 23
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. OpenBMC has placed all known hardware targets in a standard directory structure meta-openbmc-machines/meta-[architecture]/meta-[company]/meta-[target]. You can see all of the known targets with find meta-openbmc-machines -type d -name conf. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf
Zaiusmeta-openbmc-machines/meta-openpower/meta-ingrasys/meta-zaius/conf
Witherspoonmeta-openbmc-machines/meta-openpower/meta-ibm/meta-witherspoon/conf

As an example target Palmetto

export TEMPLATECONF=meta-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • REST Management
  • IPMI
  • SSH based SOL
  • Power and Cooling Management
  • Event Logs
  • Zeroconf discoverable
  • Sensors
  • Inventory
  • LED Management
  • Host Watchdog
  • Simulation
  • Code Update Support for multiple BMC/BIOS images
  • POWER On Chip Controller (OCC) Support

Features In Progress

  • Full IPMI 2.0 Compliance with DCMI
  • Verified Boot
  • HTML5 Java Script Web User Interface
  • BMC RAS

Features Requested but need help

  • OpenCompute Redfish Compliance
  • OpenBMC performance monitoring
  • cgroup user management and policies
  • Remote KVM
  • Remote USB
  • OpenStack Ironic Integration
  • QEMU enhancements

Finding out more

Dive deeper in to OpenBMC by opening the docs repository.

Contact