diff --git a/poky/documentation/sdk-manual/sdk-appendix-customizing.xml b/poky/documentation/sdk-manual/sdk-appendix-customizing.xml
index c3215e6..7454c90 100644
--- a/poky/documentation/sdk-manual/sdk-appendix-customizing.xml
+++ b/poky/documentation/sdk-manual/sdk-appendix-customizing.xml
@@ -7,7 +7,7 @@
 <title>Customizing the Extensible SDK</title>
 
 <para>
-    This appendix presents customizations you can apply to the extensible SDK.
+    This appendix describes customizations you can apply to the extensible SDK.
 </para>
 
 <section id='sdk-configuring-the-extensible-sdk'>
@@ -186,7 +186,13 @@
         You can change the displayed title for the SDK installer by setting
         the
         <ulink url='&YOCTO_DOCS_REF_URL;#var-SDK_TITLE'><filename>SDK_TITLE</filename></ulink>
-        variable.
+        variable and then rebuilding the the SDK installer.
+        For information on how to build an SDK installer, see the
+        "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
+        section.
+    </para>
+
+    <para>
         By default, this title is derived from
         <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO_NAME'><filename>DISTRO_NAME</filename></ulink>
         when it is set.
@@ -198,11 +204,28 @@
 
     <para>
         The
-        <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-populate-sdk-*'><filename>populate_sdk_ext</filename></ulink>
+        <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-populate-sdk-*'><filename>populate_sdk_base</filename></ulink>
         class defines the default value of the <filename>SDK_TITLE</filename>
         variable as follows:
         <literallayout class='monospaced'>
-     SDK_TITLE_task-populate-sdk-ext = "${@d.getVar('DISTRO_NAME') or d.getVar('DISTRO')} Extensible SDK"
+     SDK_TITLE ??= "${@d.getVar('DISTRO_NAME') or d.getVar('DISTRO')} SDK"
+        </literallayout>
+    </para>
+
+    <para>
+        While several ways exist to change this variable, an efficient method
+        is to set the variable in your distribution's configuration file.
+        Doing so creates an SDK installer title that applies across your
+        distribution.
+        As an example, assume you have your own layer for your distribution
+        named "meta-mydistro" and you are using the same type of file
+        hierarchy as does the default "poky" distribution.
+        If so, you could update the <filename>SDK_TITLE</filename> variable
+        in the
+        <filename>~/meta-mydistro/conf/distro/mydistro.conf</filename> file
+        using the following form:
+        <literallayout class='monospaced'>
+     SDK_TITLE = "<replaceable>your_title</replaceable>"
         </literallayout>
     </para>
 </section>
@@ -265,6 +288,51 @@
     </para>
 </section>
 
+<section id='sdk-changing-the-default-sdk-installation-directory'>
+    <title>Changing the Default SDK Installation Directory</title>
+
+    <para>
+        When you build the installer for the Extensible SDK, the default
+        installation directory for the SDK is based on the
+        <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO'><filename>DISTRO</filename></ulink>
+        and
+        <ulink url='&YOCTO_DOCS_REF_URL;#var-SDKEXTPATH'><filename>SDKEXTPATH</filename></ulink>
+        variables from within the
+        <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-populate-sdk-*'><filename>populate_sdk_base</filename></ulink>
+        class as follows:
+        <literallayout class='monospaced'>
+     SDKEXTPATH ??= "~/${@d.getVar('DISTRO')}_sdk"
+        </literallayout>
+        You can change this default installation directory by specifically
+        setting the <filename>SDKEXTPATH</filename> variable.
+    </para>
+
+    <para>
+        While a number of ways exist through which you can set this variable,
+        the method that makes the most sense is to set the variable in your
+        distribution's configuration file.
+        Doing so creates an SDK installer default directory that applies
+        across your distribution.
+        As an example, assume you have your own layer for your distribution
+        named "meta-mydistro" and you are using the same type of file
+        hierarchy as does the default "poky" distribution.
+        If so, you could update the <filename>SDKEXTPATH</filename> variable
+        in the
+        <filename>~/meta-mydistro/conf/distro/mydistro.conf</filename> file
+        using the following form:
+        <literallayout class='monospaced'>
+     SDKEXTPATH = "<replaceable>some_path_for_your_installed_sdk</replaceable>"
+        </literallayout>
+    </para>
+
+    <para>
+        After building your installer, running it prompts the user for
+        acceptance of the
+        <replaceable>some_path_for_your_installed_sdk</replaceable> directory
+        as the default location to install the Extensible SDK.
+    </para>
+</section>
+
 <section id='sdk-providing-additional-installable-extensible-sdk-content'>
     <title>Providing Additional Installable Extensible SDK Content</title>
 
diff --git a/poky/documentation/sdk-manual/sdk-appendix-obtain.xml b/poky/documentation/sdk-manual/sdk-appendix-obtain.xml
index c608e6f..2cadcc1 100644
--- a/poky/documentation/sdk-manual/sdk-appendix-obtain.xml
+++ b/poky/documentation/sdk-manual/sdk-appendix-obtain.xml
@@ -106,7 +106,7 @@
                 <emphasis>Set Up the Build Environment:</emphasis>
                 Be sure you are set up to use BitBake in a shell.
                 See the
-                "<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-the-development-host-to-use-the-yocto-project'>Preparing the Build Host</ulink>"
+                "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host'>Preparing the Build Host</ulink>"
                 section in the Yocto Project Development Tasks Manual for
                 information on how to get a build host ready that is either a
                 native Linux machine or a machine that uses CROPS.
diff --git a/poky/documentation/sdk-manual/sdk-eclipse-project.xml b/poky/documentation/sdk-manual/sdk-eclipse-project.xml
index f8a586f..15a9ae7 100644
--- a/poky/documentation/sdk-manual/sdk-eclipse-project.xml
+++ b/poky/documentation/sdk-manual/sdk-eclipse-project.xml
@@ -57,12 +57,12 @@
                     <ulink url='&YOCTO_DOCS_REF_URL;#hardware-build-system-term'>build host</ulink>
                     can use the Yocto Project.
                     See the
-                    "<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-the-development-host-to-use-the-yocto-project'>Preparing a Build Host</ulink>"
+                    "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host'>Preparing the Build Host</ulink>"
                     section in the Yocto Project Development Tasks Manual for
                     information on how to set up your build host.
                     <note>
                         Be sure you install the "xterm" package, which is a
-                        <ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>graphical and Eclipse plug-in extra</ulink>
+                        <ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-build-host'>graphical and Eclipse plug-in extra</ulink>
                         needed by Eclipse.
                     </note>
                     </para></listitem>
diff --git a/poky/documentation/sdk-manual/sdk-manual.xml b/poky/documentation/sdk-manual/sdk-manual.xml
index 2dabdb7..7f93d5f 100644
--- a/poky/documentation/sdk-manual/sdk-manual.xml
+++ b/poky/documentation/sdk-manual/sdk-manual.xml
@@ -57,14 +57,14 @@
                 <revremark>Released with the Yocto Project 2.5 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.5.1</revnumber>
-                <date>September 2018</date>
-                <revremark>The initial document released with the Yocto Project 2.5.1 Release.</revremark>
+                <revnumber>2.6</revnumber>
+                <date>November 2018</date>
+                <revremark>Released with the Yocto Project 2.6 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.5.2</revnumber>
+                <revnumber>2.6.1</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>The initial document released with the Yocto Project 2.5.2 Release.</revremark>
+                <revremark>Released with the Yocto Project 2.6.1 Release.</revremark>
             </revision>
        </revhistory>