diff --git a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
index 3219a23..746c0c5 100644
--- a/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
+++ b/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
@@ -11,7 +11,10 @@
 inherit kernel siteinfo
 require recipes-kernel/linux/linux-yocto.inc
 
-SRC_URI += "file://rpi-kernel-misc.cfg"
+SRC_URI += " \
+    ${@bb.utils.contains("INITRAMFS_IMAGE_BUNDLE", "1", "file://initramfs-image-bundle.cfg", "", d)} \
+    ${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "file://vc4graphics.cfg", "", d)} \
+    "
 
 KCONFIG_MODE = "--alldefconfig"
 KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
@@ -25,21 +28,6 @@
 
 LINUX_VERSION_EXTENSION ?= ""
 
-# CMDLINE for raspberrypi
-SERIAL = "${@oe.utils.conditional("ENABLE_UART", "1", "console=serial0,115200", "", d)}"
-CMDLINE ?= "dwc_otg.lpm_enable=0 ${SERIAL} root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
-
-# Add the kernel debugger over console kernel command line option if enabled
-CMDLINE_append = ' ${@oe.utils.conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
-
-# Disable rpi logo on boot
-CMDLINE_append += ' ${@oe.utils.conditional("DISABLE_RPI_BOOT_LOGO", "1", "logo.nologo", "", d)}'
-
-# You can define CMDLINE_DEBUG as "debug" in your local.conf or distro.conf
-# to enable kernel debugging.
-CMDLINE_DEBUG ?= ""
-CMDLINE_append = " ${CMDLINE_DEBUG}"
-
 KERNEL_MODULE_AUTOLOAD += "${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "stmpe-ts", "", d)}"
 
 # A LOADADDR is needed when building a uImage format kernel. This value is not
@@ -47,96 +35,9 @@
 # manually. This value unused if KERNEL_IMAGETYPE is not uImage.
 KERNEL_EXTRA_ARGS += "LOADADDR=0x00008000"
 
-# Set a variable in .configure
-# $1 - Configure variable to be set
-# $2 - value [n/y/value]
-kernel_configure_variable() {
-    # Remove the config
-    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
-    if test "$2" = "n"
-    then
-        echo "# CONFIG_$1 is not set" >> ${B}/.config
-    else
-        echo "CONFIG_$1=$2" >> ${B}/.config
-    fi
-}
-
-config_setup() {
-    # From kernel.bbclass. Unfortunately, this is needed to support builds that
-    # use devtool. The reason is as follows:
-    #
-    # - In devtool builds, externalsrc.bbclass gets inherited and sets a list of
-    # SRCTREECOVEREDTASKS, which don't get run because they affect the source
-    # tree and, when using devtool, we want the developer's changes to be the
-    # single source of truth. kernel-yocto.bbclass adds do_kernel_configme to
-    # SRCTREECOVEREDTASKS, so it doesn't run in a devtool build., In a normal
-    # non-devtool build, do_kernel_configme creates ${B}.config.
-    #
-    # - Normally (e.g. in linux-yocto), it would be OK that do_kernel_configme
-    # doesn't run, because the first few lines of do_configure in kernel.bbclass
-    # populate ${B}.config from either ${S}.config (if it exists) for custom
-    # developer changes, or otherwise from ${WORDIR}/defconfig.
-    #
-    # - In linux-raspberrypi, we add do_configure_prepend, which tweaks
-    # ${B}.config. Since this runs *before* the kernel.bbclass do_configure,
-    # ${B}.config doesn't yet exist and we hit an error. Thus we need to move
-    # the logic from do_configure up to before our do_configure_prepend. Because
-    # we are copying only a portion of do_configure and not the whole thing,
-    # there is no clean way to do it using OE functionality, so we just
-    # copy-and-paste.
-    if [ "${S}" != "${B}" ] && [ -f "${S}/.config" ] && [ ! -f "${B}/.config" ]; then
-        mv "${S}/.config" "${B}/.config"
-    fi
-
-    # Copy defconfig to .config if .config does not exist. This allows
-    # recipes to manage the .config themselves in do_configure_prepend().
-    if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
-        cp "${WORKDIR}/defconfig" "${B}/.config"
-    fi
-}
-
-do_configure_prepend() {
-    config_setup
-
-    mv -f ${B}/.config ${B}/.config.patched
-    CONF_SED_SCRIPT=""
-
-    if [ "${INITRAMFS_IMAGE_BUNDLE}" = "1" ]; then
-        kernel_configure_variable OVERLAY_FS y
-        kernel_configure_variable SQUASHFS y
-        kernel_configure_variable UBIFS_FS y
-    fi
-
-    # Activate the configuration options for VC4
-    VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
-    if [ "${VC4GRAPHICS}" = "1" ]; then
-        kernel_configure_variable I2C_BCM2835 y
-        kernel_configure_variable DRM y
-        kernel_configure_variable DRM_FBDEV_EMULATION y
-        kernel_configure_variable DRM_VC4 y
-    fi
-
-    # Keep this the last line
-    # Remove all modified configs and add the rest to .config
-    sed -e "${CONF_SED_SCRIPT}" < '${B}/.config.patched' >> '${B}/.config'
-    rm -f ${B}/.config.patched
-}
-
 do_compile_append() {
     if [ "${SITEINFO_BITS}" = "64" ]; then
         cc_extra=$(get_cc_option)
         oe_runmake dtbs CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
     fi
 }
-
-do_deploy_append() {
-    # Deploy cmdline.txt only for the main kernel package
-    if [ ${KERNEL_PACKAGE_NAME} = "kernel" ]; then
-        install -d ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}
-        PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
-        if [ ${PITFT} = "1" ]; then
-            PITFT_PARAMS="fbcon=map:10 fbcon=font:VGA8x8"
-        fi
-        echo "${CMDLINE}${PITFT_PARAMS}" > ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/cmdline.txt
-    fi
-}