diff --git a/poky/documentation/bsp-guide/bsp-guide.xml b/poky/documentation/bsp-guide/bsp-guide.xml
index addb421..dd0c76a 100644
--- a/poky/documentation/bsp-guide/bsp-guide.xml
+++ b/poky/documentation/bsp-guide/bsp-guide.xml
@@ -132,9 +132,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
         </revhistory>
 
diff --git a/poky/documentation/dev-manual/dev-manual-common-tasks.xml b/poky/documentation/dev-manual/dev-manual-common-tasks.xml
index f72f81f..00741ee 100644
--- a/poky/documentation/dev-manual/dev-manual-common-tasks.xml
+++ b/poky/documentation/dev-manual/dev-manual-common-tasks.xml
@@ -2349,7 +2349,7 @@
                 Most software provides some means of setting build-time
                 configuration options before compilation.
                 Typically, setting these options is accomplished by running a
-                configure script with some options, or by modifying a build
+                configure script with options, or by modifying a build
                 configuration file.
                 <note>
                     As of Yocto Project Release 1.7, some of the core recipes
@@ -2389,6 +2389,7 @@
                         software is built using Autotools.
                         If this is the case, you just need to worry about
                         modifying the configuration.</para>
+
                         <para>When using Autotools, your recipe needs to inherit
                         the
                         <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-autotools'><filename>autotools</filename></ulink>
@@ -2401,13 +2402,15 @@
                         or
                         <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGECONFIG_CONFARGS'><filename>PACKAGECONFIG_CONFARGS</filename></ulink>
                         to pass any needed configure options that are specific
-                        to the recipe.</para></listitem>
+                        to the recipe.
+                        </para></listitem>
                     <listitem><para><emphasis>CMake:</emphasis>
                         If your source files have a
                         <filename>CMakeLists.txt</filename> file, then your
                         software is built using CMake.
                         If this is the case, you just need to worry about
                         modifying the configuration.</para>
+
                         <para>When you use CMake, your recipe needs to inherit
                         the
                         <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-cmake'><filename>cmake</filename></ulink>
@@ -2417,7 +2420,16 @@
                         You can make some adjustments by setting
                         <ulink url='&YOCTO_DOCS_REF_URL;#var-EXTRA_OECMAKE'><filename>EXTRA_OECMAKE</filename></ulink>
                         to pass any needed configure options that are specific
-                        to the recipe.</para></listitem>
+                        to the recipe.
+                        <note>
+                            If you need to install one or more custom CMake
+                            toolchain files that are supplied by the
+                            application you are building, install the files to
+                            <filename>${D}${datadir}/cmake/</filename> Modules
+                            during
+                            <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-install'><filename>do_install</filename></ulink>.
+                        </note>
+                        </para></listitem>
                     <listitem><para><emphasis>Other:</emphasis>
                         If your source files do not have a
                         <filename>configure.ac</filename> or
@@ -2780,6 +2792,14 @@
                         <ulink url='&YOCTO_DOCS_REF_URL;#var-PARALLEL_MAKEINST'><filename>PARALLEL_MAKEINST</filename></ulink>
                         for additional information.
                         </para></listitem>
+                    <listitem><para>
+                        If you need to install one or more custom CMake
+                        toolchain files that are supplied by the
+                        application you are building, install the files to
+                        <filename>${D}${datadir}/cmake/</filename> Modules
+                        during
+                        <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-install'><filename>do_install</filename></ulink>.
+                        </para></listitem>
                 </itemizedlist>
             </note>
         </section>
@@ -5420,12 +5440,16 @@
                             <literallayout class='monospaced'>
      BBMULTICONFIG = "x86 arm"
                             </literallayout>
-                          </para>
-
-                          <para>Please note, that a "default" configuration already exists by definition,
-                          this configuration is named: "" (empty string) and is defined by the variables
-                          coming from your local.conf file. So, the previous example actually adds two
-                          additional configurations to your build "arm" and "x86" along with "".
+                            <note>
+                                A "default" configuration already exists by
+                                definition.
+                                This configuration is named: "" (i.e. empty
+                                string) and is defined by the variables coming
+                                from your <filename>local.conf</filename> file.
+                                Consequently, the previous example actually
+                                adds two additional configurations to your
+                                build: "arm" and "x86" along with "".
+                            </note>
                             </para></listitem>
                         <listitem><para>
                             <emphasis>Launch BitBake</emphasis>:
@@ -5445,9 +5469,10 @@
                             <filename>x86.conf</filename> configuration file,
                             a <filename>core-image-sato</filename>
                             image that is configured through the
-                            <filename>arm.conf</filename> configuration file and a
-                            <filename>core-image-base</filename> that is configured
-                            through your <filename>local.conf</filename> configuration file.
+                            <filename>arm.conf</filename> configuration file
+                            and a <filename>core-image-base</filename> that is
+                            configured through your
+                            <filename>local.conf</filename> configuration file.
                             </para></listitem>
                     </itemizedlist>
                     <note>
@@ -10820,6 +10845,47 @@
         </para>
 
         <para>
+            By default, the Yocto Project uses SysVinit as the initialization
+            manager.
+            However, support also exists for systemd,
+            which is a full replacement for init with
+            parallel starting of services, reduced shell overhead and other
+            features that are used by many distributions.
+        </para>
+
+        <para>
+            Within the system, SysVinit treats system components as services.
+            These services are maintained as shell scripts stored in the
+            <filename>/etc/init.d/</filename> directory.
+            Services organize into different run levels.
+            This organization is maintained by putting links to the services
+            in the <filename>/etc/rcN.d/</filename> directories, where
+            <replaceable>N/</replaceable> is one of the following options:
+            "S", "0", "1", "2", "3", "4", "5", or "6".
+            <note>
+                Each runlevel has a dependency on the previous runlevel.
+                This dependency allows the services to work properly.
+            </note>
+        </para>
+
+        <para>
+            In comparison, systemd treats components as units.
+            Using units is a broader concept as compared to using a service.
+            A unit includes several different types of entities.
+            Service is one of the types of entities.
+            The runlevel concept in SysVinit corresponds to the concept of a
+            target in systemd, where target is also a type of supported unit.
+        </para>
+
+        <para>
+            In a SysVinit-based system, services load sequentially (i.e. one
+            by one) during and parallelization is not supported.
+            With systemd, services start in parallel.
+            Needless to say, the method can have an impact on system startup
+            performance.
+        </para>
+
+        <para>
             If you want to use SysVinit, you do
             not have to do anything.
             But, if you want to use systemd, you must
diff --git a/poky/documentation/dev-manual/dev-manual.xml b/poky/documentation/dev-manual/dev-manual.xml
index 42deff1..04fa1e4 100644
--- a/poky/documentation/dev-manual/dev-manual.xml
+++ b/poky/documentation/dev-manual/dev-manual.xml
@@ -117,9 +117,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
         </revhistory>
 
diff --git a/poky/documentation/kernel-dev/kernel-dev.xml b/poky/documentation/kernel-dev/kernel-dev.xml
index c43330a..4c5881b 100644
--- a/poky/documentation/kernel-dev/kernel-dev.xml
+++ b/poky/documentation/kernel-dev/kernel-dev.xml
@@ -102,9 +102,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
         </revhistory>
 
diff --git a/poky/documentation/mega-manual/mega-manual.xml b/poky/documentation/mega-manual/mega-manual.xml
index b66b933..eac5ea7 100644
--- a/poky/documentation/mega-manual/mega-manual.xml
+++ b/poky/documentation/mega-manual/mega-manual.xml
@@ -88,9 +88,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
        </revhistory>
 
diff --git a/poky/documentation/overview-manual/overview-manual.xml b/poky/documentation/overview-manual/overview-manual.xml
index 728cad5..c7716e4 100644
--- a/poky/documentation/overview-manual/overview-manual.xml
+++ b/poky/documentation/overview-manual/overview-manual.xml
@@ -47,9 +47,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
         </revhistory>
 
diff --git a/poky/documentation/poky.ent b/poky/documentation/poky.ent
index 192b941..7af47df 100644
--- a/poky/documentation/poky.ent
+++ b/poky/documentation/poky.ent
@@ -1,14 +1,14 @@
-<!ENTITY DISTRO "2.8">
-<!ENTITY DISTRO_COMPRESSED "28">
+<!ENTITY DISTRO "3.0">
+<!ENTITY DISTRO_COMPRESSED "30">
 <!ENTITY DISTRO_NAME_NO_CAP "zeus">
 <!ENTITY DISTRO_NAME "Zeus">
 <!ENTITY DISTRO_NAME_NO_CAP_MINUS_ONE "warrior">
 <!ENTITY DISTRO_NAME_MINUS_ONE "Warrior">
-<!ENTITY YOCTO_DOC_VERSION "2.8">
+<!ENTITY YOCTO_DOC_VERSION "3.0">
 <!ENTITY YOCTO_DOC_VERSION_MINUS_ONE "2.7">
-<!ENTITY DISTRO_REL_TAG "yocto-2.8">
+<!ENTITY DISTRO_REL_TAG "yocto-3.0">
 <!ENTITY METAINTELVERSION "9.0">
-<!ENTITY REL_MONTH_YEAR "TBD">
+<!ENTITY REL_MONTH_YEAR "October 2019">
 <!ENTITY META_INTEL_REL_TAG "&METAINTELVERSION;-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION;">
 <!ENTITY POKYVERSION "22.0.0">
 <!ENTITY POKYVERSION_COMPRESSED "2200">
diff --git a/poky/documentation/profile-manual/profile-manual.xml b/poky/documentation/profile-manual/profile-manual.xml
index c6e8baf..c1f461f 100644
--- a/poky/documentation/profile-manual/profile-manual.xml
+++ b/poky/documentation/profile-manual/profile-manual.xml
@@ -102,9 +102,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
         </revhistory>
 
diff --git a/poky/documentation/ref-manual/migration.xml b/poky/documentation/ref-manual/migration.xml
index ade8787..aa44957 100644
--- a/poky/documentation/ref-manual/migration.xml
+++ b/poky/documentation/ref-manual/migration.xml
@@ -2103,10 +2103,9 @@
         </para>
 
         <para>
-            Additionally, a
-            <link linkend='ref-classes-bluetooth'><filename>bluetooth</filename></link>
-            class has been added to make selection of the appropriate bluetooth
-            support within a recipe a little easier.
+            Additionally, a <filename>bluetooth</filename> class has been added
+            to make selection of the appropriate bluetooth support within a
+            recipe a little easier.
             If you wish to make use of this class in a recipe, add something
             such as the following:
             <literallayout class='monospaced'>
@@ -6597,6 +6596,104 @@
         </para>
     </section>
 </section>
+
+
+
+
+
+
+
+
+
+<section id='moving-to-the-yocto-project-3.0-release'>
+    <title>Moving to the Yocto Project 3.0 Release</title>
+
+    <para>
+        This section provides migration information for moving to the
+        Yocto Project 3.0 Release from the prior release.
+    </para>
+
+    <section id='migration-3.0-lsb-support-removed'>
+        <title>LSB Support Removed</title>
+
+        <para>
+            LSB support has been removed.
+        </para>
+    </section>
+
+    <section id='migration-3.0-poky-lsb-replaced'>
+        <title><filename>poky-lsb</filename> Replaced</title>
+
+        <para>
+            <filename>poky-lsb</filename> replaced by
+            <filename>poky-altcfg</filename> for alternate configurations to
+            be tested on the autobuilder.
+            As well as an example of subclassing a distro config.
+        </para>
+    </section>
+
+    <section id='migration-3.0-openssl-removed'>
+        <title>OpenSSL 1.0.X removed</title>
+
+        <para>
+            OpenSSL 1.0.X removed.
+        </para>
+    </section>
+
+    <section id='migration-3.0-hash-Equivalence added'>
+        <title>Hash Equivalence Added</title>
+
+        <para>
+            Hash Equivalence added.
+            See <ulink url='https://git.openembedded.org/openembedded-core/commit/?id=49b10ab3f802bf36d8a2add7db208a868f525d5b'></ulink>
+            for setup information.
+        </para>
+    </section>
+
+    <section id='migration-3.0-gnu-tests-added'>
+        <title><filename>gcc/glibc/binutls</filename> GNU Tests Added</title>
+
+        <para>
+            <filename>gcc/glibc/binutls</filename> GNU tests added.
+        </para>
+    </section>
+
+    <section id='migration-3.0-removed-recipes'>
+        <title>Removed Recipes</title>
+
+        <para>
+            Some topic...
+         </para>
+    </section>
+
+    <section id='migration-3.0-removed-classes'>
+        <title>Removed Classes</title>
+
+        <para>
+            Some topic...
+        </para>
+    </section>
+
+    <section id='migration-3.0-miscellaneous-changes'>
+        <title>Miscellaneous Changes</title>
+
+        <para>
+            Some topic...
+        </para>
+    </section>
+</section>
+
+
+
+
+
+
+
+
+
+
+
+
 </chapter>
 <!--
 vim: expandtab tw=80 ts=4
diff --git a/poky/documentation/ref-manual/ref-classes.xml b/poky/documentation/ref-manual/ref-classes.xml
index 5403f20..f9bbddd 100644
--- a/poky/documentation/ref-manual/ref-classes.xml
+++ b/poky/documentation/ref-manual/ref-classes.xml
@@ -428,6 +428,14 @@
         variable to specify additional configuration options to be passed
         using the <filename>cmake</filename> command line.
     </para>
+
+    <para>
+        On the occasion that you would be installing custom CMake toolchain
+        files supplied by the application being built, you should install them
+        to the preferred CMake Module directory:
+        <filename>${D}${datadir}/cmake/</filename> Modules during
+        <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-install'><filename>do_install</filename></ulink>.
+    </para>
 </section>
 
 <section id='ref-classes-cml1'>
diff --git a/poky/documentation/ref-manual/ref-manual.xml b/poky/documentation/ref-manual/ref-manual.xml
index fc43197..b442f70 100644
--- a/poky/documentation/ref-manual/ref-manual.xml
+++ b/poky/documentation/ref-manual/ref-manual.xml
@@ -133,9 +133,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
         </revhistory>
 
diff --git a/poky/documentation/ref-manual/ref-variables.xml b/poky/documentation/ref-manual/ref-variables.xml
index 8ad3f9b..02abc59 100644
--- a/poky/documentation/ref-manual/ref-variables.xml
+++ b/poky/documentation/ref-manual/ref-variables.xml
@@ -1349,8 +1349,8 @@
             <glossdef>
                 <para role="glossdeffirst">
 <!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
-                    Specifies each additional separate configuration when you are
-                    building targets with multiple configurations.
+                    Specifies each additional separate configuration when you
+                    are building targets with multiple configurations.
                     Use this variable in your
                     <filename>conf/local.conf</filename> configuration file.
                     Specify a <replaceable>multiconfigname</replaceable> for
@@ -2182,9 +2182,10 @@
 
                 <para>
                     The <filename>BUSYBOX_SPLIT_SUID</filename> variable
-                    defaults to "1", which results in a single output
+                    defaults to "1", which results in splitting the output
                     executable file.
-                    Set the variable to "0" to split the output file.
+                    Set the variable to "0" to get a single output executable
+                    file.
                 </para>
             </glossdef>
         </glossentry>
diff --git a/poky/documentation/sdk-manual/sdk-manual.xml b/poky/documentation/sdk-manual/sdk-manual.xml
index 7edd2c4..8d5f6ec 100644
--- a/poky/documentation/sdk-manual/sdk-manual.xml
+++ b/poky/documentation/sdk-manual/sdk-manual.xml
@@ -67,9 +67,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
        </revhistory>
 
diff --git a/poky/documentation/toaster-manual/toaster-manual.xml b/poky/documentation/toaster-manual/toaster-manual.xml
index b31659f..d7b4bce 100644
--- a/poky/documentation/toaster-manual/toaster-manual.xml
+++ b/poky/documentation/toaster-manual/toaster-manual.xml
@@ -77,9 +77,9 @@
                 <revremark>Released with the Yocto Project 2.7 Release.</revremark>
             </revision>
             <revision>
-                <revnumber>2.8</revnumber>
+                <revnumber>3.0</revnumber>
                 <date>&REL_MONTH_YEAR;</date>
-                <revremark>Released with the Yocto Project 2.8 Release.</revremark>
+                <revremark>Released with the Yocto Project 3.0 Release.</revremark>
             </revision>
        </revhistory>
 
diff --git a/poky/documentation/tools/mega-manual.sed b/poky/documentation/tools/mega-manual.sed
index 9c4f4e2..374d8e7 100644
--- a/poky/documentation/tools/mega-manual.sed
+++ b/poky/documentation/tools/mega-manual.sed
@@ -1,36 +1,36 @@
 # Processes bitbake-user-manual (<word>-<word>-<word> style).
 # This style is for manual three-word folders, which currently is only the BitBake User Manual.
 # We used to have the "yocto-project-qs" and "poky-ref-manual" folders but no longer do.
-# s@"ulink" href="http://www.yoctoproject.org/docs/2.8/[a-z]*-[a-z]*-[a-z]*/[a-z]*-[a-z]*-[a-z]*.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/bitbake-user-manual/bitbake-user-manual.html#@"link" href="#@g
+# s@"ulink" href="http://www.yoctoproject.org/docs/3.0/[a-z]*-[a-z]*-[a-z]*/[a-z]*-[a-z]*-[a-z]*.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/bitbake-user-manual/bitbake-user-manual.html#@"link" href="#@g
 
 # Processes all other manuals (<word>-<word> style).
 # This style is for manual folders that use two word, which is the standard now (e.g. "ref-manual").
 # Here is the one-liner:
-# s@"ulink" href="http://www.yoctoproject.org/docs/2.8/[a-z]*-[a-z]*/[a-z]*-[a-z]*.html#@"link" href="#@g
+# s@"ulink" href="http://www.yoctoproject.org/docs/3.0/[a-z]*-[a-z]*/[a-z]*-[a-z]*.html#@"link" href="#@g
 
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/sdk-manual/sdk-manual.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/bsp-guide/bsp-guide.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/dev-manual/dev-manual.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/overview-manual/overview-manual.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/brief-yoctoprojectqs/brief-yoctoprojectqs.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/kernel-dev/kernel-dev.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/profile-manual/profile-manual.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/ref-manual/ref-manual.html#@"link" href="#@g
-s@"ulink" href="http://www.yoctoproject.org/docs/2.8/toaster-manual/toaster-manual.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/sdk-manual/sdk-manual.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/bsp-guide/bsp-guide.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/dev-manual/dev-manual.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/overview-manual/overview-manual.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/brief-yoctoprojectqs/brief-yoctoprojectqs.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/kernel-dev/kernel-dev.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/profile-manual/profile-manual.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/ref-manual/ref-manual.html#@"link" href="#@g
+s@"ulink" href="http://www.yoctoproject.org/docs/3.0/toaster-manual/toaster-manual.html#@"link" href="#@g
 
 # Process cases where just an external manual is referenced without an id anchor
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/brief-yoctoprojectqs/brief-yoctoprojectqs.html" target="_top">Yocto Project Quick Build</a>@Yocto Project Quick Build@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/bitbake-user-manual/bitbake-user-manual.html" target="_top">BitBake User Manual</a>@BitBake User Manual@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/dev-manual/dev-manual.html" target="_top">Yocto Project Development Tasks Manual</a>@Yocto Project Development Tasks Manual@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/overview-manual/overview-manual.html" target="_top">Yocto Project Overview and Concepts Manual</a>@Yocto project Overview and Concepts Manual@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/sdk-manual/sdk-manual.html" target="_top">Yocto Project Application Development and the Extensible Software Development Kit (eSDK)</a>@Yocto Project Application Development and the Extensible Software Development Kit (eSDK)@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/bsp-guide/bsp-guide.html" target="_top">Yocto Project Board Support Package (BSP) Developer's Guide</a>@Yocto Project Board Support Package (BSP) Developer's Guide@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/profile-manual/profile-manual.html" target="_top">Yocto Project Profiling and Tracing Manual</a>@Yocto Project Profiling and Tracing Manual@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/kernel-dev/kernel-dev.html" target="_top">Yocto Project Linux Kernel Development Manual</a>@Yocto Project Linux Kernel Development Manual@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/ref-manual/ref-manual.html" target="_top">Yocto Project Reference Manual</a>@Yocto Project Reference Manual@g
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/toaster-manual/toaster-manual.html" target="_top">Toaster User Manual</a>@Toaster User Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/brief-yoctoprojectqs/brief-yoctoprojectqs.html" target="_top">Yocto Project Quick Build</a>@Yocto Project Quick Build@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/bitbake-user-manual/bitbake-user-manual.html" target="_top">BitBake User Manual</a>@BitBake User Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/dev-manual/dev-manual.html" target="_top">Yocto Project Development Tasks Manual</a>@Yocto Project Development Tasks Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/overview-manual/overview-manual.html" target="_top">Yocto Project Overview and Concepts Manual</a>@Yocto project Overview and Concepts Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/sdk-manual/sdk-manual.html" target="_top">Yocto Project Application Development and the Extensible Software Development Kit (eSDK)</a>@Yocto Project Application Development and the Extensible Software Development Kit (eSDK)@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/bsp-guide/bsp-guide.html" target="_top">Yocto Project Board Support Package (BSP) Developer's Guide</a>@Yocto Project Board Support Package (BSP) Developer's Guide@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/profile-manual/profile-manual.html" target="_top">Yocto Project Profiling and Tracing Manual</a>@Yocto Project Profiling and Tracing Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/kernel-dev/kernel-dev.html" target="_top">Yocto Project Linux Kernel Development Manual</a>@Yocto Project Linux Kernel Development Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/ref-manual/ref-manual.html" target="_top">Yocto Project Reference Manual</a>@Yocto Project Reference Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/toaster-manual/toaster-manual.html" target="_top">Toaster User Manual</a>@Toaster User Manual@g
 
 # Process a single, rouge occurrence of a linked reference to the Mega-Manual.
-s@<a class="ulink" href="http://www.yoctoproject.org/docs/2.8/mega-manual/mega-manual.html" target="_top">Yocto Project Mega-Manual</a>@Yocto Project Mega-Manual@g
+s@<a class="ulink" href="http://www.yoctoproject.org/docs/3.0/mega-manual/mega-manual.html" target="_top">Yocto Project Mega-Manual</a>@Yocto Project Mega-Manual@g