diff --git a/poky/meta/lib/oeqa/manual/bsp-hw.json b/poky/meta/lib/oeqa/manual/bsp-hw.json
index 4b7c76f..18cec22 100644
--- a/poky/meta/lib/oeqa/manual/bsp-hw.json
+++ b/poky/meta/lib/oeqa/manual/bsp-hw.json
@@ -526,7 +526,7 @@
                     "expected_results": ""
                 },
                 "4": {
-                    "action": "check ping status  \n\nNote: This TC apply only for core-image-full-cmd and core-image-lsb .",
+                    "action": "check ping status  \n\nNote: This TC apply only for core-image-full-cmd.",
                     "expected_results": "ping should always work before/after standby"
                 }
             },
diff --git a/poky/meta/lib/oeqa/manual/compliance-test.json b/poky/meta/lib/oeqa/manual/compliance-test.json
index 8c13b68..367a416 100644
--- a/poky/meta/lib/oeqa/manual/compliance-test.json
+++ b/poky/meta/lib/oeqa/manual/compliance-test.json
@@ -1,36 +1,6 @@
 [
     {
         "test": {
-            "@alias": "compliance-test.compliance-test.LSB_subset_test_suite",
-            "author": [
-                {
-                    "email": "corneliux.stoicescu@intel.com",
-                    "name": "corneliux.stoicescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "Get lsd-sdk image and install it on target device or start the image(if it is QEMU) with option \"-m 512M\"",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "Comment in /opt/lsb-test/session any tests you don't want to run.",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "Run /usr/bin/LSB_Test.sh which should download the LSB suite and set it up. Some packages may fail to download because their location changed on ftp.linuxfoundation.org. You need to manually update /opt/lsb-test/packages_list",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "Tests should start automatically, you can use the web interface to reconfigure the setup. ",
-                    "expected_results": "Check the result on wiki https://wiki.yoctoproject.org/wiki/LSB_Result No regression failures should be met."
-                }
-            },
-            "summary": "LSB_subset_test_suite"
-        }
-    },
-    {
-        "test": {
             "@alias": "compliance-test.compliance-test.stress_test_-_Genericx86-64",
             "author": [
                 {
@@ -40,7 +10,7 @@
             ],
             "execution": {
                 "1": {
-                    "action": "Bootup with core-image-lsb-sdk image",
+                    "action": "Bootup with core-image-sato-sdk image",
                     "expected_results": ""
                 },
                 "2": {
diff --git a/poky/meta/lib/oeqa/manual/crops.json b/poky/meta/lib/oeqa/manual/crops.json
index 1cf3c8f..5cfa653 100644
--- a/poky/meta/lib/oeqa/manual/crops.json
+++ b/poky/meta/lib/oeqa/manual/crops.json
@@ -234,16 +234,16 @@
                     "expected_results": "this should output the directory of the devtool script and it should be within the sdk workdir you are working in.   \n\n"
                 },
                 "5": {
-                    "action": "devtool add v4l2loopback-driver  https://github.com/umlaeute/v4l2loopback.git   \n\n",
-                    "expected_results": "This should automatically create the recipe v4l2loopback-driver.bb under <crops-esdk-workdir-workspace>/recipes/v4l2loopback-driver/v4l2loopback-driver.bb "
+                    "action": "devtool add kernel-module-hello-world https://git.yoctoproject.org/git/kernel-module-hello-world \n\n",
+                    "expected_results": "This should automatically create the recipe kernel-module-hello-world.bb under <crops-esdk-workdir-workspace>/recipes/kernel-module-hello-world/kernel-module-hello-world.bb "
                 },
                 "6": {
-                    "action": "devtool build v4l2loopback-driver   \n\n",
+                    "action": "devtool build kernel-module-hello-world   \n\n",
                     "expected_results": "This should compile an image   \n\n"
                 },
                 "7": {
-                    "action": "devtool reset v4l2loopback-driver   ",
-                    "expected_results": "This cleans sysroot of the v4l2loopback-driver recipe, but it leaves the source tree intact. meaning it does not erase."
+                    "action": "devtool reset kernel-module-hello-world   ",
+                    "expected_results": "This cleans sysroot of the kernel-module-hello-world recipe, but it leaves the source tree intact. meaning it does not erase."
                 }
             },
             "summary": "sdkext_devtool_kernelmodule"
@@ -291,4 +291,4 @@
             "summary": "sdkext_recipes_for_nodejs"
         }
     }
-]
\ No newline at end of file
+]
diff --git a/poky/meta/lib/oeqa/manual/toaster-managed-mode.json b/poky/meta/lib/oeqa/manual/toaster-managed-mode.json
index 812f57d..12374c7 100644
--- a/poky/meta/lib/oeqa/manual/toaster-managed-mode.json
+++ b/poky/meta/lib/oeqa/manual/toaster-managed-mode.json
@@ -1494,7 +1494,7 @@
           "expected_results": "A type in form appears. \n\n\t"
         },
         "6": {
-          "action": "Change distro (ex: poky-lsb). \n\n\t",
+          "action": "Change distro (ex: poky-tiny). \n\n\t",
           "expected_results": "Distro has changed. \n\n\t"
         },
         "7": {
@@ -1503,7 +1503,7 @@
         },
         "8": {
           "action": " Build a recipe (ex: core-image-minimal) and wait until build finish.",
-          "expected_results": "Build finishes successfully. \n\nThe 'success' criteria for this one should be that the build is reported as using the poky-lsb distro in the build summary page, and that the DISTRO variable value in the bitbake variables table is set to the value specified in toaster (poky-lsb again)."
+          "expected_results": "Build finishes successfully. \n\nThe 'success' criteria for this one should be that the build is reported as using the poky-tiny distro in the build summary page, and that the DISTRO variable value in the bitbake variables table is set to the value specified in toaster (poky-tiny again)."
         }
       },
       "summary": "Build_a_recipe_with_different_distro"
@@ -1612,7 +1612,7 @@
           "expected_results": ""
         },
         "3": {
-          "action": "Check that the table is populated with the list of image recipes (eg. core-image minimal, core-image-lsb) \n\n\n",
+          "action": "Check that the table is populated with the list of image recipes (eg. core-image minimal) \n\n\n",
           "expected_results": ""
         },
         "4": {
@@ -1670,7 +1670,7 @@
           "expected_results": ""
         },
         "7": {
-          "action": "Sort the table by \"Layer\" and then navigate away by selecting an image (such as core-image-lsb). When you click the \"back\" button in the web-browser to go back, the \"New custom image\" table should still be sorted by \"Layer\".  \nThis should apply also by navigating back to the page by any other means. \n\n",
+          "action": "Sort the table by \"Layer\" and then navigate away by selecting an image. When you click the \"back\" button in the web-browser to go back, the \"New custom image\" table should still be sorted by \"Layer\".  \nThis should apply also by navigating back to the page by any other means. \n\n",
           "expected_results": ""
         },
         "8": {
@@ -2348,7 +2348,7 @@
           "expected_results": ""
         },
         "3": {
-          "action": "Build 6 recipes example (core-image-sato, core-image-minimal, core-image-base, core-image-lsb, core-image-clutter) to name a few. ",
+          "action": "Build 6 recipes example (core-image-sato, core-image-minimal, core-image-base, core-image-clutter) to name a few. ",
           "expected_results": " All recipes are built correctly \n\n"
         },
         "4": {
@@ -2382,7 +2382,7 @@
           "expected_results": ""
         },
         "3": {
-          "action": "Build 6 recipes example (core-image-sato, core-image-minimal, core-image-base, core-image-lsb, core-image-clutter) to name a few. \n\n",
+          "action": "Build 6 recipes example (core-image-sato, core-image-minimal, core-image-base, core-image-clutter) to name a few. \n\n",
           "expected_results": "All recipes are built correctly \n\n"
         },
         "4": {
@@ -2420,7 +2420,7 @@
           "expected_results": ""
         },
         "3": {
-          "action": "Build 4 recipes example (core-image-sato, core-image-minimal, core-image-base, core-image-lsb, core-image-clutter) to name a few. \n\n",
+          "action": "Build 4 recipes example (core-image-sato, core-image-minimal, core-image-base, core-image-clutter) to name a few. \n\n",
           "expected_results": " All recipes are built correctly \n\n"
         },
         "4": {