meta-openembedded and poky: subtree updates
Squash of the following due to dependencies among them
and OpenBMC changes:
meta-openembedded: subtree update:d0748372d2..9201611135
meta-openembedded: subtree update:9201611135..17fd382f34
poky: subtree update:9052e5b32a..2e11d97b6c
poky: subtree update:2e11d97b6c..a8544811d7
The change log was too large for the jenkins plugin
to handle therefore it has been removed. Here is
the first and last commit of each subtree:
meta-openembedded:d0748372d2
cppzmq: bump to version 4.6.0
meta-openembedded:17fd382f34
mpv: Remove X11 dependency
poky:9052e5b32a
package_ipk: Remove pointless comment to trigger rebuild
poky:a8544811d7
pbzip2: Fix license warning
Change-Id: If0fc6c37629642ee207a4ca2f7aa501a2c673cd6
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
diff --git a/poky/documentation/overview-manual/overview-manual-development-environment.xml b/poky/documentation/overview-manual/overview-manual-development-environment.xml
index 2f1bd16..36ebf8a 100644
--- a/poky/documentation/overview-manual/overview-manual-development-environment.xml
+++ b/poky/documentation/overview-manual/overview-manual-development-environment.xml
@@ -87,7 +87,7 @@
as its operating system as your development host.
When you have a Mac or Windows-based system, you can set it up
as the development host by using
- <ulink url='https://git.yoctoproject.org/cgit/cgit.cgi/crops/about/'>CROPS</ulink>,
+ <ulink url='https://github.com/crops/poky-container'>CROPS</ulink>,
which leverages
<ulink url='https://www.docker.com/'>Docker Containers</ulink>.
Once you take the steps to set up a CROPS machine, you effectively
diff --git a/poky/documentation/overview-manual/overview-manual-yp-intro.xml b/poky/documentation/overview-manual/overview-manual-yp-intro.xml
index dbf62cc..1b60a30 100644
--- a/poky/documentation/overview-manual/overview-manual-yp-intro.xml
+++ b/poky/documentation/overview-manual/overview-manual-yp-intro.xml
@@ -225,9 +225,9 @@
For information that helps you transition from
trying out the Yocto Project to using it for your
project, see the
- "<ulink url='&YOCTO_HOME_URL;/docs/what-i-wish-id-known/'>What I wish I'd Known</ulink>"
+ "<ulink url='&YOCTO_DOCS_URL;/what-i-wish-id-known/'>What I wish I'd Known</ulink>"
and
- "<ulink url='&YOCTO_HOME_URL;/docs/transitioning-to-a-custom-environment/'>Transitioning to a Custom Environment for Systems Development</ulink>"
+ "<ulink url='&YOCTO_DOCS_URL;/transitioning-to-a-custom-environment/'>Transitioning to a Custom Environment for Systems Development</ulink>"
documents on the Yocto Project website.
</para></listitem>
<listitem><para>
@@ -437,7 +437,7 @@
<itemizedlist>
<listitem><para id='gs-crops-overview'>
<emphasis>CROPS:</emphasis>
- <ulink url='https://git.yoctoproject.org/cgit/cgit.cgi/crops/about/'>CROPS</ulink>
+ <ulink url='https://github.com/crops/poky-container/'>CROPS</ulink>
is an open source, cross-platform development framework
that leverages
<ulink url='https://www.docker.com/'>Docker Containers</ulink>.
@@ -883,7 +883,7 @@
<listitem><para>
<emphasis>CROss PlatformS (CROPS):</emphasis>
Typically, you use
- <ulink url='https://git.yoctoproject.org/cgit/cgit.cgi/crops/about/'>CROPS</ulink>,
+ <ulink url='https://github.com/crops/poky-container/'>CROPS</ulink>,
which leverages
<ulink url='https://www.docker.com/'>Docker Containers</ulink>,
to set up a Build Host that is not running Linux (e.g.
@@ -908,6 +908,24 @@
section in the Yocto Project Development Tasks Manual.
</para></listitem>
<listitem><para>
+ <emphasis>Windows Subsystem For Linux (WSLv2):</emphasis>
+ You may use Windows Subsystem For Linux v2 to set up a build
+ host using Windows 10.
+ <note>
+ The Yocto Project is not compatible with WSLv1, it is
+ compatible but not officially supported nor validated
+ with WSLv2, if you still decide to use WSL please upgrade
+ to WSLv2.
+ </note>
+ The Windows Subsystem For Linux allows Windows 10 to run a real
+ Linux kernel inside of a lightweight utility virtual
+ machine (VM) using virtualization technology.</para>
+ <para>For information on how to set up a Build Host with
+ WSLv2, see the
+ "<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-to-use-wsl'>Setting Up to Use Windows Subsystem For Linux</ulink>"
+ section in the Yocto Project Development Tasks Manual.
+ </para></listitem>
+ <listitem><para>
<emphasis>Toaster:</emphasis>
Regardless of what your Build Host is running, you can
use Toaster to develop software using the Yocto Project.
diff --git a/poky/documentation/overview-manual/overview-manual.xml b/poky/documentation/overview-manual/overview-manual.xml
old mode 100644
new mode 100755
index c7716e4..210d644
--- a/poky/documentation/overview-manual/overview-manual.xml
+++ b/poky/documentation/overview-manual/overview-manual.xml
@@ -22,11 +22,10 @@
<authorgroup>
<author>
- <firstname>Scott</firstname> <surname>Rifenbark</surname>
<affiliation>
- <orgname>Scotty's Documentation Services, INC</orgname>
+ <orgname>&ORGNAME;</orgname>
</affiliation>
- <email>srifenbark@gmail.com</email>
+ <email>&ORGEMAIL;</email>
</author>
</authorgroup>
@@ -39,7 +38,7 @@
<revision>
<revnumber>2.6</revnumber>
<date>November 2018</date>
- <revremark>Released with the Yocto Project 2.7 Release.</revremark>
+ <revremark>Released with the Yocto Project 2.6 Release.</revremark>
</revision>
<revision>
<revnumber>2.7</revnumber>
@@ -48,9 +47,14 @@
</revision>
<revision>
<revnumber>3.0</revnumber>
- <date>&REL_MONTH_YEAR;</date>
+ <date>October 2019</date>
<revremark>Released with the Yocto Project 3.0 Release.</revremark>
</revision>
+ <revision>
+ <revnumber>3.1</revnumber>
+ <date>&REL_MONTH_YEAR;</date>
+ <revremark>Released with the Yocto Project 3.1 Release.</revremark>
+ </revision>
</revhistory>
<copyright>
@@ -74,7 +78,7 @@
Yocto Project.
To be sure you have the latest version of the manual
for this release, go to the
- <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+ <ulink url='&YOCTO_DOCS_URL;'>Yocto Project documentation page</ulink>
and select the manual from that site.
Manuals from the site are more up-to-date than manuals
derived from the Yocto Project released TAR files.
@@ -91,18 +95,20 @@
page.
If you need a version of this manual for a different
Yocto Project release, visit the
- <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+ <ulink url='&YOCTO_DOCS_URL;'>Yocto Project documentation page</ulink>
and select the manual set by using the
"ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
pull-down menus.
</para></listitem>
- <listitem><para>
+ <listitem>
+ <para>
To report any inaccuracies or problems with this
- manual, send an email to the Yocto Project
- discussion group at
- <filename>yocto@yoctoproject.com</filename> or log into
- the freenode <filename>#yocto</filename> channel.
- </para></listitem>
+ (or any other Yocto Project) manual, send an email to
+ the Yocto Project documentation mailing list at
+ <filename>docs@lists.yoctoproject.org</filename> or
+ log into the freenode <filename>#yocto</filename> channel.
+ </para>
+ </listitem>
</itemizedlist>
</note>
</legalnotice>