Squashed 'yocto-poky/' content from commit ea562de
git-subtree-dir: yocto-poky
git-subtree-split: ea562de57590c966cd5a75fda8defecd397e6436
diff --git a/meta/recipes-devtools/gnu-config/gnu-config/config-guess-uclibc.patch b/meta/recipes-devtools/gnu-config/gnu-config/config-guess-uclibc.patch
new file mode 100644
index 0000000..2094116
--- /dev/null
+++ b/meta/recipes-devtools/gnu-config/gnu-config/config-guess-uclibc.patch
@@ -0,0 +1,170 @@
+Upstream-Status: Pending
+
+Patch courtesy gentoo-portage/sys-devel/gnuconfig/files/automake-1.8.5-config-guess-uclibc.patch.
+
+updated to 20050516 by Marcin 'Hrw' Juszkiewicz (by hand)
+updated to 20080123 by Nitin A Kamble (by hand)
+updated to 20111001 by Saul Wold (by hand)
+updated to 20120818 by Marcin 'Hrw' Juszkiewicz (by hand)
+
+Signed-off-by: Saul Wold <sgw@linux.intel.com>
+Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
+
+---
+ config.guess | 67 +++++++++++++++++++++++++++++++++++------------------------
+ 1 file changed, 40 insertions(+), 27 deletions(-)
+
+--- git.orig/config.guess
++++ git/config.guess
+@@ -138,6 +138,19 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` |
+ UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
++# Detect uclibc systems.
++
++LIBC="gnu"
++if [ -f /usr/include/bits/uClibc_config.h ]
++then
++ LIBC=uclibc
++ if [ -n `grep "#define __UCLIBC_CONFIG_VERSION__" /usr/include/bits/uClibc_config.h` ]
++ then
++ UCLIBC_SUBVER=`sed -n "/#define __UCLIBC_CONFIG_VERSION__ /s///p" /usr/include/bits/uClibc_config.h`
++ LIBC=$LIBC$UCLIBC_SUBVER
++ fi
++fi
++
+ # Note: order is significant - the case branches are not exclusive.
+
+ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+@@ -886,15 +899,15 @@ EOF
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++ if test "$?" = 0 ; then LIBC="gnulibc1" ; else LIBC="" ; fi
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+@@ -906,19 +919,19 @@ EOF
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ cris:Linux:*:*)
+- echo ${UNAME_MACHINE}-axis-linux-gnu
++ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ crisv32:Linux:*:*)
+- echo ${UNAME_MACHINE}-axis-linux-gnu
++ echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ exit ;;
+ frv:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ hexagon:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+@@ -932,13 +945,13 @@ EOF
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m32r*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m68*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+@@ -957,54 +970,54 @@ EOF
+ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+ ;;
+ or32:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ padre:Linux:*:*)
+- echo sparc-unknown-linux-gnu
++ echo sparc-unknown-linux-${LIBC}
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+- echo hppa64-unknown-linux-gnu
++ echo hppa64-unknown-linux-${LIBC}
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+- PA7*) echo hppa1.1-unknown-linux-gnu ;;
+- PA8*) echo hppa2.0-unknown-linux-gnu ;;
+- *) echo hppa-unknown-linux-gnu ;;
++ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
++ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
++ *) echo hppa-unknown-linux-${LIBC} ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+- echo powerpc64-unknown-linux-gnu
++ echo powerpc64-unknown-linux-${LIBC}
+ exit ;;
+ ppc:Linux:*:*)
+- echo powerpc-unknown-linux-gnu
++ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sh*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ tile*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ vax:Linux:*:*)
+- echo ${UNAME_MACHINE}-dec-linux-gnu
++ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ exit ;;
+ x86_64:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ xtensa*:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux-gnu
++ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
diff --git a/meta/recipes-devtools/gnu-config/gnu-config/gnu-configize.in b/meta/recipes-devtools/gnu-config/gnu-config/gnu-configize.in
new file mode 100755
index 0000000..d4908fc
--- /dev/null
+++ b/meta/recipes-devtools/gnu-config/gnu-config/gnu-configize.in
@@ -0,0 +1,267 @@
+#! /usr/bin/env perl
+# -*- perl -*-
+
+eval 'case $# in 0) exec /usr/bin/perl -S "$0";; *) exec /usr/bin/perl -S "$0" "$@";; esac'
+ if 0;
+
+# gnu-configize - install the GNU config.guess / config.sub in a directory tree
+# Based on autoreconf:
+# Copyright (C) 1994, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+BEGIN
+{
+ my $datadir = $ENV{'autom4te_perllibdir'} || '@autom4te_perllibdir@';
+# '/home/kergoth/code/build-arm/tmp/staging/share/autoconf';
+ unshift @INC, $datadir;
+
+ # Override SHELL. On DJGPP SHELL may not be set to a shell
+ # that can handle redirection and quote arguments correctly,
+ # e.g.: COMMAND.COM. For DJGPP always use the shell that configure
+ # has detected.
+ $ENV{'SHELL'} = '/bin/sh' if ($^O eq 'dos');
+}
+
+use Autom4te::ChannelDefs;
+use Autom4te::Channels;
+use Autom4te::Configure_ac;
+use Autom4te::FileUtils;
+use Autom4te::General;
+use Autom4te::XFile;
+# Do not use Cwd::chdir, since it might hang.
+use Cwd 'cwd';
+use strict;
+
+## ----------- ##
+## Variables. ##
+## ----------- ##
+
+# $HELP
+# -----
+$help = "Usage: $0 [OPTION] ... [CONFIGURE-AC or DIRECTORY] ...
+
+Install the GNU config.sub and config.guess scripts in the
+DIRECTORIES or the directory trees driven by CONFIGURE-AC
+(defaulting to `.').
+
+Operation modes:
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -v, --verbose verbosely report processing
+ -f, --force consider all files obsolete
+ -s, --symlink install symbolic links instead of copies
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [syntax]
+
+" . Autom4te::ChannelDefs::usage . "
+
+The environment variable \`WARNINGS\' is honored. Some subtools might
+support other warning types, using \`all' is encouraged.
+";
+
+# $VERSION
+# --------
+$version = "gnu-configize 1.0
+
+Copyright (C) 2004 Chris Larson
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+";
+
+my $configdir = '@gnu-configdir@';
+#'/home/kergoth/code/build-arm/tmp/staging/i686-linux/share/gnu-config';
+my $autoconf = $ENV{'AUTOCONF'} || 'autoconf';
+
+# use symlinks instead.
+my $symlink = 0;
+
+my $configure_ac;
+
+my $rm = "rm -f";
+my $ln_s = "ln -sf";
+my $cp = "cp -f";
+my $mkdir = "mkdir";
+my $chmod = "chmod";
+
+## ---------- ##
+## Routines. ##
+## ---------- ##
+
+
+# parse_args ()
+# -------------
+# Process any command line arguments.
+sub parse_args ()
+{
+ my $srcdir;
+
+ getopt ('s|symlink' => \$symlink);
+
+ # Even if the user specified a configure.ac, trim to get the
+ # directory, and look for configure.ac again. Because (i) the code
+ # is simpler, and (ii) we are still able to diagnose simultaneous
+ # presence of configure.ac and configure.in.
+ @ARGV = map { /configure\.(ac|in)$/ ? dirname ($_) : $_ } @ARGV;
+ push @ARGV, '.' unless @ARGV;
+}
+
+
+# &gnu_configize_current_directory
+# -----------------------------
+sub gnu_configize_current_directory ()
+{
+ my $configure_ac = require_configure_ac;
+
+ # ---------------------- #
+ # Is it using Autoconf? #
+ # ---------------------- #
+
+ my $uses_autoconf;
+ my $uses_gettext;
+ my $configure_ac_file = new Autom4te::XFile $configure_ac;
+ while ($_ = $configure_ac_file->getline)
+ {
+ s/#.*//;
+ s/dnl.*//;
+ $uses_autoconf = 1 if /AC_INIT/;
+ }
+
+ if (!$uses_autoconf)
+ {
+ verb "$configure_ac: not using Autoconf";
+ return;
+ }
+
+ my $aux_dir;
+ my @subdir;
+ my $cmd;
+ my $dest;
+
+ verb "$configure_ac: tracing";
+ my $traces = new Autom4te::XFile
+ ("$autoconf"
+ . join (' --trace=', '',
+ # If you change this list, update the
+ # `Autoreconf-preselections' section of autom4te.in.
+ 'AC_CONFIG_AUX_DIR:AC_CONFIG_AUX_DIR:\$1',
+ 'AC_CONFIG_SUBDIRS:AC_CONFIG_SUBDIRS:\$1',
+ 'AC_INIT',
+ )
+ . ' |');
+ while ($_ = $traces->getline)
+ {
+ $aux_dir = $1 if /AC_CONFIG_AUX_DIR:(.*)/;
+ $uses_autoconf = 1 if /AC_INIT/;
+ push @subdir, split (' ', $1) if /AC_CONFIG_SUBDIRS:(.*)/;
+ }
+
+ # The subdirs are *optional*, they may not exist.
+ foreach (@subdir)
+ {
+ if (-d)
+ {
+ verb "$configure_ac: subdirectory $_ to gnu-configize";
+ gnu_configize ($_);
+ }
+ else
+ {
+ verb "$configure_ac: subdirectory $_ not present";
+ }
+ }
+
+ $dest = ".";
+
+ if (defined $aux_dir)
+ {
+ $dest = $aux_dir;
+ if (! -d $aux_dir)
+ {
+ verb "$configure_ac: creating directory $aux_dir";
+ mkdir $aux_dir
+ or error "cannot create $aux_dir: $!";
+ }
+ }
+
+ if (!$symlink)
+ {
+ $cmd = $cp;
+ }
+ else
+ {
+ $cmd = $ln_s;
+ }
+
+ xsystem ("$cmd $configdir/config.guess $dest/");
+ xsystem ("$chmod u+x $dest/config.guess");
+ xsystem ("$cmd $configdir/config.sub $dest/");
+ xsystem ("$chmod u+x $dest/config.sub");
+}
+
+
+# &gnu_configize ($DIRECTORY)
+# ------------------------
+# Reconf the $DIRECTORY.
+sub gnu_configize ($)
+{
+ my ($directory) = @_;
+ my $cwd = cwd;
+
+ # The format for this message is not free: taken from Emacs, itself
+ # using GNU Make's format.
+ verb "Entering directory `$directory'";
+ chdir $directory
+ or error "cannot chdir to $directory: $!";
+
+ gnu_configize_current_directory;
+
+ # The format is not free: taken from Emacs, itself using GNU Make's
+ # format.
+ verb "Leaving directory `$directory'";
+ chdir $cwd
+ or error "cannot chdir to $cwd: $!";
+}
+
+
+## ------ ##
+## Main. ##
+## ------ ##
+
+parse_args;
+
+# Autoreconf all the given configure.ac. A while loop, not a for,
+# since the list can change at runtime because of AC_CONFIG_SUBDIRS.
+for my $directory (@ARGV)
+ {
+ gnu_configize ($directory);
+ }
+
+### Setup "GNU" style for perl-mode and cperl-mode.
+## Local Variables:
+## perl-indent-level: 2
+## perl-continued-statement-offset: 2
+## perl-continued-brace-offset: 0
+## perl-brace-offset: 0
+## perl-brace-imaginary-offset: 0
+## perl-label-offset: -2
+## cperl-indent-level: 2
+## cperl-brace-offset: 0
+## cperl-continued-brace-offset: 0
+## cperl-label-offset: -2
+## cperl-extra-newline-before-brace: t
+## cperl-merge-trailing-else: nil
+## cperl-continued-statement-offset: 2
+## End:
diff --git a/meta/recipes-devtools/gnu-config/gnu-config/musl-support.patch b/meta/recipes-devtools/gnu-config/gnu-config/musl-support.patch
new file mode 100644
index 0000000..3147435
--- /dev/null
+++ b/meta/recipes-devtools/gnu-config/gnu-config/musl-support.patch
@@ -0,0 +1,25 @@
+support musl
+
+Upstream-Status: Pending
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+
+Index: gnu-config-20120814/config.sub
+===================================================================
+--- gnu-config-20120814.orig/config.sub 2012-09-18 02:27:45.000000000 -0700
++++ gnu-config-20120814/config.sub 2014-03-26 00:34:19.955996709 -0700
+@@ -123,6 +123,7 @@
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
++ linux-musl* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+@@ -1365,6 +1366,7 @@
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
++ | -linux-musl* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
diff --git a/meta/recipes-devtools/gnu-config/gnu-config/uclibc.patch b/meta/recipes-devtools/gnu-config/gnu-config/uclibc.patch
new file mode 100644
index 0000000..75fe100
--- /dev/null
+++ b/meta/recipes-devtools/gnu-config/gnu-config/uclibc.patch
@@ -0,0 +1,23 @@
+Upstream-Status: Pending
+
+--- config.sub.orig 2004-05-14 19:38:36.000000000 -0500
++++ config.sub 2004-05-14 19:39:17.000000000 -0500
+@@ -118,7 +118,7 @@
+ # Here we must recognize all the valid KERNEL-OS combinations.
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+- nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
++ nto-qnx* | linux-gnu* | linux-uclibc* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+@@ -1135,7 +1135,8 @@
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
++ | -mingw32* | -linux-gnu* | -linux-uclibc* \
++ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
diff --git a/meta/recipes-devtools/gnu-config/gnu-config_20120814.bb b/meta/recipes-devtools/gnu-config/gnu-config_20120814.bb
new file mode 100644
index 0000000..eb7e420
--- /dev/null
+++ b/meta/recipes-devtools/gnu-config/gnu-config_20120814.bb
@@ -0,0 +1,41 @@
+SUMMARY = "gnu-configize"
+DESCRIPTION = "Tool that installs the GNU config.guess / config.sub into a directory tree"
+SECTION = "devel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://config.guess;endline=39;md5=b79a4663475f4d724846463277817e0d"
+
+DEPENDS_class-native = "perl-native-runtime"
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+
+SRC_URI = "http://downloads.yoctoproject.org/releases/gnu-config/gnu-config-${PV}.tar.bz2 \
+ file://config-guess-uclibc.patch \
+ file://musl-support.patch \
+ file://gnu-configize.in"
+
+SRC_URI[md5sum] = "bcfca5a2bb39edad4aae5a65efc84094"
+SRC_URI[sha256sum] = "44f99a8e76f3e8e4fec0bb5ad4762f8e44366168554ce66cb85afbe2ed3efd8b"
+
+CLEANBROKEN = "1"
+
+do_compile[noexec] = "1"
+
+do_install () {
+ install -d ${D}${datadir}/gnu-config \
+ ${D}${bindir}
+ cat ${WORKDIR}/gnu-configize.in | \
+ sed -e 's,@gnu-configdir@,${datadir}/gnu-config,g' \
+ -e 's,@autom4te_perllibdir@,${datadir}/autoconf,g' > ${D}${bindir}/gnu-configize
+ # In the native case we want the system perl as perl-native can't have built yet
+ if [ "${PN}" != "gnu-config-native" -a "${PN}" != "nativesdk-gnu-config" ]; then
+ sed -i -e 's,/usr/bin/env,${bindir}/env,g' ${D}${bindir}/gnu-configize
+ fi
+ chmod 755 ${D}${bindir}/gnu-configize
+ install -m 0644 config.guess config.sub ${D}${datadir}/gnu-config/
+}
+
+PACKAGES = "${PN}"
+FILES_${PN} = "${bindir} ${datadir}/gnu-config"
+
+BBCLASSEXTEND = "native nativesdk"
diff --git a/meta/recipes-devtools/gnu-config/gnu-config_git.bb b/meta/recipes-devtools/gnu-config/gnu-config_git.bb
new file mode 100644
index 0000000..3d5f2b8
--- /dev/null
+++ b/meta/recipes-devtools/gnu-config/gnu-config_git.bb
@@ -0,0 +1,40 @@
+SUMMARY = "gnu-configize"
+DESCRIPTION = "Tool that installs the GNU config.guess / config.sub into a directory tree"
+SECTION = "devel"
+LICENSE = "GPL-3.0-with-autoconf-exception"
+LIC_FILES_CHKSUM = "file://config.guess;beginline=7;endline=27;md5=9bac8b1743c2240ae07cce6e546ac2f2"
+
+DEPENDS_class-native = "perl-native-runtime"
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+SRCREV = "b576fa87c140b824466ef1638e945e87dc5c0343"
+PV = "20150728+git${SRCPV}"
+
+SRC_URI = "git://git.sv.gnu.org/config.git \
+ file://gnu-configize.in"
+
+S = "${WORKDIR}/git"
+
+CLEANBROKEN = "1"
+
+do_compile[noexec] = "1"
+
+do_install () {
+ install -d ${D}${datadir}/gnu-config \
+ ${D}${bindir}
+ cat ${WORKDIR}/gnu-configize.in | \
+ sed -e 's,@gnu-configdir@,${datadir}/gnu-config,g' \
+ -e 's,@autom4te_perllibdir@,${datadir}/autoconf,g' > ${D}${bindir}/gnu-configize
+ # In the native case we want the system perl as perl-native can't have built yet
+ if [ "${PN}" != "gnu-config-native" -a "${PN}" != "nativesdk-gnu-config" ]; then
+ sed -i -e 's,/usr/bin/env,${bindir}/env,g' ${D}${bindir}/gnu-configize
+ fi
+ chmod 755 ${D}${bindir}/gnu-configize
+ install -m 0644 config.guess config.sub ${D}${datadir}/gnu-config/
+}
+
+PACKAGES = "${PN}"
+FILES_${PN} = "${bindir} ${datadir}/gnu-config"
+
+BBCLASSEXTEND = "native nativesdk"