commit	b748fdb520d63c32c02e24b54f4b16b06c6f0d05	[log] [tgz]
author	Matt Spinler <spinler@us.ibm.com>	Tue Apr 04 14:18:14 2023 -0500
committer	Matt Spinler <spinler@us.ibm.com>	Thu Jun 29 15:31:58 2023 +0000
tree	cbb482f90d3317508ae39d7ff9708e6965110a07
parent	1a309f77e3610276de43befafa295b35f619f005 [diff]

tree: cbb482f90d3317508ae39d7ff9708e6965110a07

README.md

phosphor-buttons

Phosphor-buttons has a collection of IO event handler interfaces for physical inputs which are typically part of some sort of panel.

It defines an individual dbus interface object for each physical button/switch inputs such as power button, reset button etc. Each button interface monitors its associated IO for event changes and emits signals that the button-handler application listens for.

Button Behavior

Power Button

All events occur when the button is released.

If the power is off, power on the host.

If the power is on, it depends on how long the press was and which options are enabled:

Short press: Do a host power off
Long press, as determined by the 'long-press-time-ms' meson option: Do a chassis (hard) power off.

Custom Power Button Profiles

The 'power-button-profile' meson option can be used to select custom power button profiles that have different behaviors.

Available profiles are:

host_then_chassis_poweroff: When power is on, short presses are ignored and a long press issues a host power off first and then a chassis power off if held past a certain time. This class has additional details.

Multi-Host Buttons

See this section below.

Reset Button

When released, reboots the host.

ID Button

When released, toggles the 'enclosure_identify' LED group provided by the phosphor-led-manager repository. The group name can be changed using the 'id-led-group' meson option.

Gpio defs config

In order to monitor a button/input interface the respective gpio config details should be mentioned in the gpio defs json file - /etc/default/obmc/gpio/gpio_defs.json

The button interface type name.
An array consists of single or multiple gpio configs associated with the specific button interface.

example gpio def Json config

{
    "gpio_definitions": [
        {
            "name": "POWER_BUTTON",
            "gpio_config" :[
               {
                "pin": "D0",
                "direction": "both"
               }
            ]
        },
        {
            "name": "RESET_BUTTON",
            "gpio_config" :[
                {
                "pin": "AB0",
                "direction": "both"
                 }
            ]
        },
        {
            "name" : "HOST_SELECTOR",

            "group_gpio_config" : [
            {
                "pin": "AA4",
                "direction": "both"
            },
            {
                "pin": "AA5",
                "direction": "both"
            },
            {
                "pin": "AA6",
                "direction": "both"
            },
            {
                "pin": "AA7",
                "direction": "both"
            }
            ]
        },

}

Single gpio config

This config is original config which can be used for configs with only single gpio such as power button,reset button, OCP debug card host select button.

{
    "name": "POWER_BUTTON",
    "pin": "D0",
    "direction": "both"
},

Note: this config is used by most of the other platforms so this format is kept as it is so that existing gpio configs do not get affected.

Group gpio config

The following configs are related to multi-host bmc systems more info explained in the design: https://github.com/openbmc/docs/blob/master/designs/multihost-phosphor-buttons.md

Host selector gpio config example

The host selector has four gpios associated. So the related gpios are mentioned in a json array named group_gpio_config.

name - This is name of the specific gpio line
pin - This represents the pin number from linux dts file.
polarity - polarity type of the gpio
max_position - This represents the max number of hosts in the multi-host bmc system.
host_selector_map - This map is oem specific host position map which has how the value read from the host selector gpios is mapped to the respective host number.

Example : The value of "7" derived from the 4 host select gpio lines are mapped to host position 1.

{
  "name": "HOST_SELECTOR",

  "group_gpio_config": [
    {
      "name": "host_select_0",
      "pin": "AA4",
      "direction": "both",
      "polarity": "active_high"
    },
    {
      "name": "host_select_1",
      "pin": "AA5",
      "direction": "both",
      "polarity": "active_high"
    },
    {
      "name": "host_select_2",
      "pin": "AA6",
      "direction": "both",
      "polarity": "active_high"
    },
    {
      "name": "host_select_3",
      "pin": "AA7",
      "direction": "both",
      "polarity": "active_high"
    }
  ],
  "max_position": 4,
  "host_selector_map": {
    "6": 0,
    "7": 1,
    "8": 2,
    "9": 3,
    "10": 4,
    "11": 0,
    "12": 1,
    "13": 2,
    "14": 3,
    "15": 4
  }
}

Host selector cpld config example

There are also some systems that get the host selector selection from the CPLD, the configuration is provided below.

name - The button interface type name.
i2c_bus - The i2c bus of cpld
i2c_address - The i2c address of cpld
register_name - The register file name exported by CLD driver for IO event listen
max_position - This represents the max number of hosts in the multi-host bmc system.

{
  "cpld_definitions": [
    {
      "name": "HOST_SELECTOR",
      "i2c_bus": 12,
      "i2c_address": 15,
      "register_name": "uart-selection-debug-card",
      "max_position": 4
    }
  ]
}

Serial uart mux config

Similar to host selector there are multiple gpios associated with the serial uart mux. These gpio configs are specificed as part of json array "group_gpio_config".

Here the serial uart mux output is accessed via OCP debug card. SO the OCP debug card present gpio is mentioned part of the group_gpio_config. The debug card present gpio is identified by its name "debug_card_present".

The other gpios part of the group gpio config is serial uart MUX gpio select lines and serial_uart_rx line.

name - this is name of the specific gpio line
pin - this represents the pin number from linux dts file.
polarity - polarity type of the gpio
serial_uart_mux_map - This is the map for selected host position to the serial uart mux select output value

{
  "name": "SERIAL_UART_MUX",

  "group_gpio_config": [
    {
      "name": "serial_uart_sel_0",
      "pin": "E0",
      "direction": "out",
      "polarity": "active_high"
    },
    {
      "name": "serial_uart_sel_1",
      "pin": "E1",
      "direction": "out",
      "polarity": "active_high"
    },
    {
      "name": "serial_uart_sel_2",
      "pin": "E2",
      "direction": "out",
      "polarity": "active_high"
    },
    {
      "name": "serial_uart_sel_3",
      "pin": "E3",
      "direction": "out",
      "polarity": "active_high"
    },
    {
      "name": "serial_uart_rx",
      "pin": "E4",
      "direction": "out",
      "polarity": "active_high"
    },
    {
      "name": "debug_card_present",
      "pin": "R3",
      "direction": "both",
      "polarity": "active_high"
    }
  ],
  "serial_uart_mux_map": {
    "0": 4,
    "1": 0,
    "2": 1,
    "3": 2,
    "4": 3
  }
}