Network: define interface for tunnel parameters
Change-Id: Ic44f54c0ea3a5c732c1d0045d50bd1c2238076e0
Signed-off-by: Ratan Gupta <ratagupt@in.ibm.com>
diff --git a/xyz/openbmc_project/Network/Experimental/Tunnel.interface.yaml b/xyz/openbmc_project/Network/Experimental/Tunnel.interface.yaml
new file mode 100644
index 0000000..89e3039
--- /dev/null
+++ b/xyz/openbmc_project/Network/Experimental/Tunnel.interface.yaml
@@ -0,0 +1,82 @@
+description: >
+ This defines network tunneling parameters.
+
+# TODO Fix it through https://github.com/openbmc/openbmc/issues/1438
+# creatable: true
+
+properties:
+ - name: InterfaceName
+ type: string
+ description: >
+ Name of the interface.
+ - name: Local
+ type: string
+ description: >
+ Local endpoint of tunnel.
+ - name: Remote
+ type: string
+ description: >
+ Remote endpoint of tunnel.
+ - name: TOS
+ type: uint32
+ description: >
+ The Type Of Service byte value for a tunnel interface.
+ - name: TTL
+ type: uint32
+ description: >
+ Number of hops that a packet is permitted to travel.
+ - name: DiscoverPathMTU
+ type: boolean
+ description: >
+ When true, enables Path MTU Discovery on the tunnel.
+ - name: IPv6FlowLabel
+ type: uint32
+ description: >
+ Configures the 20-bit flow label. It can be configured to a value
+ in the range 0–0xFFFFF, or be set to "inherit", in which case the
+ original flowlabel is used.
+ - name: CopyDSCP
+ type: boolean
+ description: >
+ When true, the Differentiated Service Code Point
+ (DSCP) field will be copied to the inner header from outer header
+ during the decapsulation of an IPv6 tunnel packet.
+ - name: EncapsulationLimit
+ type: uint32
+ description: >
+ The Tunnel Encapsulation Limit option specifies how many
+ additional levels of encapsulation are permitted to be prepended
+ to the packet.
+ - name: Key
+ type: string
+ description: >
+ This parameter specifies the same key to use in both
+ directions (InputKey= and OutputKey=).
+ - name: InputKey
+ type: string
+ description: >
+ This parameter specifies the key to use for input.
+ - name: OutputKey
+ type: string
+ description: >
+ This parameter specifies the key to use for output.
+ - name: Mode
+ type: enum[self.IPv6Tunnel]
+ description: >
+ An "ip6tnl" tunnel can be in one of three modes.
+ default: any
+
+enumerations:
+ - name: IPv6Tunnel
+ description: >
+ Possible IPv6 tunnel types.
+ values:
+ - name: ip6ip6
+ description: >
+ IPv6 over IPv6.
+ - name: ipip6
+ description: >
+ IPv4 over IPv6.
+ - name: any
+ description: >
+ Either ip6ip6 or ipip6.