diff --git a/xyz/openbmc_project/Ipmi/SOL.interface.yaml b/xyz/openbmc_project/Ipmi/SOL.interface.yaml
new file mode 100644
index 0000000..94db59f
--- /dev/null
+++ b/xyz/openbmc_project/Ipmi/SOL.interface.yaml
@@ -0,0 +1,43 @@
+description: >
+    SOL properties use for Get/Set SOL config parameter command in host-ipmid
+    sending config to SOL process in net-ipmid.
+    Since some platforms need to access Get/Set SOL config parameter command
+    through KCS, and current sol manager is implemented in net-ipmid and
+    cannot be accessed by host-ipmid, add a dbus interface for host-ipmid
+    command to transfer properties to net-ipmid.
+    This interface will be implemented in phosphor-settings.
+properties:
+    - name: Progress
+      type: byte
+      description: >
+        Set In Progress property, indicate when any parameters are being
+        updated.
+    - name: Enable
+      type: boolean
+      description: >
+        SOL Enable property, this controls whether the SOL payload type
+        can be activated.
+    - name: Authentication
+      type: byte
+      description: >
+        If SOL enable Force Payload Encryption and Authenticaton.
+        And the minimun operating privilege level SOL required.
+    - name: Accumulate
+      type: byte
+      description: >
+        Character Accumulate Interval in 5ms increments.
+        BMC will wait this time before transmitting a packet.
+    - name: Threshold
+      type: byte
+      description: >
+        BMC will automatically send an SOL character data packet containing
+        this number of characters.
+    - name: RetryCount
+      type: byte
+      description: >
+        Packet will be dropped if no ACK/NACK received by time retries
+        expire.
+    - name: RetryInterval
+      type: byte
+      description: >
+        Retry Interval in 10ms increments.