yaml: format with prettier
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I193f690f3612fe72ec69030f81f4d5096a761601
diff --git a/yaml/xyz/openbmc_project/Network/Experimental/Bond.interface.yaml b/yaml/xyz/openbmc_project/Network/Experimental/Bond.interface.yaml
index 2120875..f0b3472 100644
--- a/yaml/xyz/openbmc_project/Network/Experimental/Bond.interface.yaml
+++ b/yaml/xyz/openbmc_project/Network/Experimental/Bond.interface.yaml
@@ -30,56 +30,56 @@
description: >
Possible bonding mode types.
values:
- - name: RoundRobin
- description: >
- It is the default mode,in this mode system transmits packets in
- sequential order from the first available slave through the last.
- - name: ActiveBackup
- description: >
- In this mode, only one slave in the bond is active.
- The other one will become active, only when the active slave fails.
- - name: XOR
- description: >
- Transmit based on selectable hashing algorithm.
- The default policy is a simple source+destination MAC address algorithm.
- - name: Broadcast
- description: >
- Transmits everything on all slave interfaces.
- - name: Dynamic
- description: >
- IEEE 802.3ad Dynamic link aggregation.
- - name: TLB
- description: >
- The outgoing traffic is distributed according to the current load on each slave.
- - name: ALB
- description: >
- Incoming/outgoing traffic is distributed according to the current load on each slave.
+ - name: RoundRobin
+ description: >
+ It is the default mode,in this mode system transmits packets in
+ sequential order from the first available slave through the last.
+ - name: ActiveBackup
+ description: >
+ In this mode, only one slave in the bond is active.
+ The other one will become active, only when the active slave fails.
+ - name: XOR
+ description: >
+ Transmit based on selectable hashing algorithm.
+ The default policy is a simple source+destination MAC address algorithm.
+ - name: Broadcast
+ description: >
+ Transmits everything on all slave interfaces.
+ - name: Dynamic
+ description: >
+ IEEE 802.3ad Dynamic link aggregation.
+ - name: TLB
+ description: >
+ The outgoing traffic is distributed according to the current load on each slave.
+ - name: ALB
+ description: >
+ Incoming/outgoing traffic is distributed according to the current load on each slave.
- name: HashPolicy
description: >
Possible policy types.
values:
- - name: Layer2
- description: >
- This policy uses XOR of hardware MAC addresses and packet type ID
- field to generate the hash.
- - name: Layer2Plus3
- description: >
- This policy uses a combination of layer2 and layer3
- protocol information to generate the hash.
- - name: Layer3Plus4
- description: >
- This policy uses upper layer protocol information,
- when available, to generate the hash.
- - name: Encap2Plus3
- description: >
- This policy uses the same formula as layer2+3 but it
- relies on skb_flow_dissect to obtain the header fields
- which might result in the use of inner headers if an
- encapsulation protocol is used.
- - name: Encap3Plus4
- description: >
- This policy uses the same formula as layer3+4 but it
- relies on skb_flow_dissect to obtain the header fields
- which might result in the use of inner headers if an
- encapsulation protocol is used.
+ - name: Layer2
+ description: >
+ This policy uses XOR of hardware MAC addresses and packet type ID
+ field to generate the hash.
+ - name: Layer2Plus3
+ description: >
+ This policy uses a combination of layer2 and layer3
+ protocol information to generate the hash.
+ - name: Layer3Plus4
+ description: >
+ This policy uses upper layer protocol information,
+ when available, to generate the hash.
+ - name: Encap2Plus3
+ description: >
+ This policy uses the same formula as layer2+3 but it
+ relies on skb_flow_dissect to obtain the header fields
+ which might result in the use of inner headers if an
+ encapsulation protocol is used.
+ - name: Encap3Plus4
+ description: >
+ This policy uses the same formula as layer3+4 but it
+ relies on skb_flow_dissect to obtain the header fields
+ which might result in the use of inner headers if an
+ encapsulation protocol is used.