reformat with latest settings
Reformat with the latest settings from openbmc-build-scripts (and
copy latest config files where appropriate). Fix a few minor
markdownlint issues.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I55205817c29dc3f182a165ddf9cd5d4e07b90063
diff --git a/yaml/xyz/openbmc_project/Network/EthernetInterface.interface.yaml b/yaml/xyz/openbmc_project/Network/EthernetInterface.interface.yaml
index f45cac7..f39fd13 100644
--- a/yaml/xyz/openbmc_project/Network/EthernetInterface.interface.yaml
+++ b/yaml/xyz/openbmc_project/Network/EthernetInterface.interface.yaml
@@ -1,7 +1,6 @@
description: >
- This defines an ethernet interface.
- An object implementing this interface must implement
- xyz.openbmc_project.State.OperationalStatus.
+ This defines an ethernet interface. An object implementing this interface
+ must implement xyz.openbmc_project.State.OperationalStatus.
properties:
- name: InterfaceName
@@ -27,8 +26,8 @@
type: size
default: 0
description: >
- This indicates the size in bytes of largest protocol data unit,
- which can be passed in an Ethernet frame on the interface.
+ This indicates the size in bytes of largest protocol data unit, which
+ can be passed in an Ethernet frame on the interface.
- name: DomainName
type: array[string]
description: >
@@ -36,8 +35,8 @@
- name: DHCPEnabled
type: enum[self.DHCPConf]
description: >
- Address mode of the ethernet interface. Deprecated in favor of
- split options to avoid combinatorics.
+ Address mode of the ethernet interface. Deprecated in favor of split
+ options to avoid combinatorics.
- name: DHCP4
type: boolean
description: >
@@ -56,8 +55,8 @@
type: array[string]
description: >
A statically defined set of DNS server IP addresses to be used when
- DHCP provisioning is not enabled for name server configuration. As
- an implementation option this may also be used in addition to DHCP
+ DHCP provisioning is not enabled for name server configuration. As an
+ implementation option this may also be used in addition to DHCP
provided addresses, or in cases where the DHCP server provides no DNS
assigments.
errors:
@@ -65,14 +64,14 @@
- name: NTPServers
type: array[string]
description: >
- NTP servers that are currently in use on this interface.
- This includes both DHCP and static NTP server addresses.
+ NTP servers that are currently in use on this interface. This includes
+ both DHCP and static NTP server addresses.
- name: StaticNTPServers
type: array[string]
description: >
This property describes statically defined NTPServers on the
- interface. This property supports read/write operation.
- Configure the NTP servers on the system during write operation.
+ interface. This property supports read/write operation. Configure the
+ NTP servers on the system during write operation.
- name: LinkLocalAutoConf
type: enum[self.LinkLocalConf]
description: >
@@ -92,8 +91,8 @@
- readonly
description: >
This property reports the link status for the NIC. The read-only
- boolean value is TRUE when the network cable is inserted, or there
- is a carrier signal. It is FALSE when the cable is unplugged, or the
+ boolean value is TRUE when the network cable is inserted, or there is
+ a carrier signal. It is FALSE when the cable is unplugged, or the
carrier signal is missing.
- name: DefaultGateway
type: string
@@ -104,9 +103,9 @@
- name: DefaultGateway6
type: string
description: >
- Default IPv6 gateway of the ethernet interface.
- For supported address formats refer RFC 2373.
- Refer below man page for both v4 and v6 address format details
+ Default IPv6 gateway of the ethernet interface. For supported address
+ formats refer RFC 2373. Refer below man page for both v4 and v6
+ address format details
https://man7.org/linux/man-pages/man3/inet_pton.3.html
errors:
- xyz.openbmc_project.Common.Error.InvalidArgument
@@ -124,15 +123,12 @@
- name: DHCPConf
description: >
- High level definitions of available DHCP states.
- These definitions do not have a 1:1 correlation to the
- systemd.network configuration file contents.
- both: Enable IPv4 DHCP and IPv6 Stateful DHCP
- v4v6stateless: Enable IPv4 DHCP and IPv6 SLAAC
- v6: Enable IPv6 Stateful DHCP
- v6stateless: Enable IPv6 SLAAC
- v4: Enable IPv4 DHCP
- none: Disable DHCP for IPv4 and IPv6
+ High level definitions of available DHCP states. These definitions do
+ not have a 1:1 correlation to the systemd.network configuration file
+ contents. both: Enable IPv4 DHCP and IPv6 Stateful DHCP v4v6stateless:
+ Enable IPv4 DHCP and IPv6 SLAAC v6: Enable IPv6 Stateful DHCP
+ v6stateless: Enable IPv6 SLAAC v4: Enable IPv4 DHCP none: Disable DHCP
+ for IPv4 and IPv6
values:
- name: both
- name: v4v6stateless