Revert "Add Inventory/MultiRecord interfaces"
This reverts commit 393530883ad5b93e90af0b669a95bf97e5c4d058.
Reason for revert: Breaks the build, and interface likely needs
discussed further. Submitter also mentioned he had changes that he
wanted to make to address comments.
Change-Id: Iacf8933675f1f5c45f433ad8592a3c152f1c314c
Signed-off-by: Ed Tanous <ed.tanous@intel.com>
diff --git a/xyz/openbmc_project/Inventory/MultiRecord/DcOutput.interface.yaml b/xyz/openbmc_project/Inventory/MultiRecord/DcOutput.interface.yaml
deleted file mode 100644
index 28cfee0..0000000
--- a/xyz/openbmc_project/Inventory/MultiRecord/DcOutput.interface.yaml
+++ /dev/null
@@ -1,48 +0,0 @@
-description: >
- IPMI FRU MultiRecord Area, DC Output record (Type 0x01)
- In accordance with IPMI Platform Management FRU Information
- Storage Definition v1.0 Document Revision 1.3, Table 18-2
-
-properties:
- - name: Standby
- type: boolean
- description: >
- Offset 0, bit 7.
- Standby.
- - name: OutputNumber
- type: int64
- description: >
- Offset 0, bits 3..0.
- Output number.
- - name: NominalVoltage
- type: int64
- description: >
- Offset 1.
- Nominal voltage (10 mV).
- - name: MaxNegativeVoltage
- type: int64
- description: >
- Offset 3.
- Maximum negative voltage (10 mV)
- (most negative voltage with respect to nominal).
- - name: MaxPositiveVoltage
- type: int64
- description: >
- Offset 5.
- Maximum positive voltage (10 mV)
- (most positive voltage with respect to nominal).
- - name: RippleAndNoise
- type: int64
- description: >
- Offset 7.
- Ripple and Noise pk-pk 10Hz to 30 MHz (mV).
- - name: MinCurrentDraw
- type: int64
- description: >
- Offset 9.
- Minimum current draw (mA).
- - name: MaxCurrentDraw
- type: int64
- description: >
- Offset 11.
- Maximum current draw (mA).
diff --git a/xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml b/xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml
deleted file mode 100644
index 688b901..0000000
--- a/xyz/openbmc_project/Inventory/MultiRecord/PowerSupply.interface.yaml
+++ /dev/null
@@ -1,121 +0,0 @@
-description: >
- MultiRecord Power Supply Information (Record Type 0x00)
- In accordance with IPMI Platform Management FRU Information
- Storage Definition v1.0 Document Revision 1.3, Table 18-1.
-
-properties:
- - name: OveralCapacity
- type: int64
- description: >
- Offset 0, bits 11..0.
- Overall capacity (watts)
- - name: PeakVA
- type: int64
- description: >
- Offset 2.
- Peak VA
- - name: InrushCurrent
- type: int64
- description: >
- Offset 4.
- Inrush current
- - name: InrushInterval
- type: int64
- description: >
- Offset 5.
- Inrush interval in ms.
- - name: LowInputVoltage1
- type: int64
- description: >
- Offset 6.
- Low end Input voltage range 1 (10mV)
- - name: HighInputVoltage1
- type: int64
- description: >
- Offset 8.
- High end Input voltage range 1 (10mV)
- - name: LowInputVoltage2
- type: int64
- description: >
- Offset 10.
- Low end Input voltage range 2 (10mV)
- - name: HighInputVoltage2
- type: int64
- description: >
- Offset 12.
- High end Input voltage range 2 (10mV)
- - name: LowInputFrequency
- type: int64
- description: >
- Offset 14.
- Low end Input frequency range
- - name: HighInputFrequency
- type: int64
- description: >
- Offset 15.
- High end Input frequency range
- - name: InDropoutTolerance
- type: int64
- description: >
- Offset 16.
- Input dropout tolerance in ms
- - name: TachoPPR_FailPinPolarity
- type: boolean
- description: >
- Offset 17, bit 4.
- Tachometer pulses per rotation/Predictive fail pin polarity.
- Meaning depends on PrediciveFailSupport.
- False means 1 pulse per rotation (for tacho) or assertion indicates failure (for predictive falure pin).
- True means 2 pulses per rotation (for tacho) or deassertion indicates failure (for predictive falure pin).
- - name: HotSwap
- type: boolean
- description: >
- Offset 17, bit 3.
- Hot Swap Support
- - name: Autoswitch
- type: boolean
- description: >
- Offset 17, bit 2.
- Autoswitch
- - name: PowerFactor
- type: boolean
- description: >
- Offset 17, bit 1.
- Power factor correction
- - name: PredictiveFailSupport
- type: boolean
- description: >
- Offset 17, bit 0.
- Predictive fail pin supported. When false, tachometer is used instead.
- Affects meaning of TachoPPR_FailPinPolarity.
- - name: HoldUpTime
- type: int64
- description: >
- Offset 18, bits 15..12.
- Peak Wattage hold up time in seconds
- - name: PeakCapacity
- type: int64
- description: >
- Offset 18, bits 11..0.
- Peak capacity (watts)
- - name: Voltage1
- type: int64
- description: >
- Offset 20, byte 1, bits 7..4.
- Combined Wattage Voltage 1
- - name: Voltage2
- type: int64
- description: >
- Offset 20, byte 1, bits 3..0.
- Combined Wattage Voltage 2
- - name: TotalWattage
- type: int64
- description: >
- Offset 20, bytes 2..3.
- Total Combined Wattage
- - name: TachometerLow
- type: int64
- description: >
- Offset 23.
- Predictive fail tachometer lower threshold (RPS).
- Used when PredictiveFailSupport is false.