description: >
    This defines an ethernet interface.
    An object implementing this interface must implement
    xyz.openbmc_project.State.OperationalStatus.


properties:
    - name: InterfaceName
      type: string
      description: >
          Name of the ethernet interface.
    - name: Speed
      type: uint32
      description: >
          Current speed of the ethernet interface, in Mbps.
    - name: AutoNeg
      type: boolean
      description: >
          This indicates if the speed and duplex are automatically negotiated
          and configured on this ethernet interface.
    - name: DomainName
      type: array[string]
      description: >
          Domain names of the ethernet interface.
    - name: DHCPEnabled
      type: boolean
      description: >
          Address mode of the ethernet interface.
    - name: Nameservers
      type: array[string]
      description: >
          DNS servers that are currently in use on this interface.
      errors:
          - xyz::openbmc_project.Common.Error.NotAllowed
    - name: StaticNameServers
      type: array[string]
      description: >
          A statically defined set of DNS server IP addresses to be used when
          DHCP provisioning is not enabled for name server configuration. As
          an implementation option this may also be used in addition to DHCP
          provided addresses, or in cases where the DHCP server provides no DNS
          assigments.
      errors:
         - xyz.openbmc_project.Common.Error.InvalidArgument
    - name: NTPServers
      type: array[string]
      description: >
          This property describes the NTP Servers on the interface.
          Implementation of this Dbus-interface is required to implement this property.
          This property supports read/write operation.
          Configure the NTP servers on the system during write operation.
    - name: LinkLocalAutoConf
      type: enum[self.LinkLocalConf]
      description: >
          This indicates link local auto configuration on this ethernet
          interface and configured on this ethernet interface.
    - name: IPv6AcceptRA
      type: boolean
      description: >
          Boolean for accepting router advertisements in IPv6
    - name: NICEnabled
      type: boolean
      description: >
          Boolean for to enabling or disabling the ethernet port
    - name: LinkUp
      type: boolean
      flags:
          - const
      description: >
          This property reports the link status for the NIC. The read-only
          boolean value is TRUE when the network cable is inserted, or there
          is a carrier signal. It is FALSE when the cable is unplugged, or the
          carrier signal is missing.

enumerations:
    - name: LinkLocalConf
      description: >
          Possible link local auto configuration values.
      values:
        - name: fallback
        - name: both
        - name: v4
        - name: v6
        - name: none