#Example fan zone definitions for phosphor-fan-control

#List the properties of the fan zones that are possible in the system.
#The zones may be conditional based on certain conditions, such as
#different chassis types or water cooled models.  The fans themselves
#are not listed in this file.  They are in a separate YAML file so it
#can be machine generated (i.e. from the MRW) if desired.

#The general structure is a list of groups of zones, where a group
#contains both the zones and the conditions required for the zones
#to be valid

#The cooling_profile is used along with the zone number to know
#which fans in the fan yaml belong in this zone instance.  For
#example, a fan may only be in zone 0 if it's the air cooled version
#of the system, but not with the water cooled version.  In that
#case, the fan yaml would have a cooling_profile of 'air' to match
#the zone cooling profile.

#manager_configuration:
#  power_on_delay: [Number of seconds that phosphor-fan-control --init
#                   should delay after setting fans to full speed on
#                   a power on.]
#
#zone_configuration:
# - zone_conditions:
#    - name: [Name of a condition, if any.]
#
#   zones:
#     - zone: [zone number]
#       cooling_profiles:
#         - [cooling profile]
#       full_speed: [Full speed for the zone.]
#       default_floor: [Default floor speed for the zone that fan speeds can
#                       not go below.]
#       increase_delay: [Number of seconds to delay additional speed increases
#                        that are less than the speed increase that's currently
#                        occurring.]
#       decrease_interval: [A repeating number of seconds interval that
#                           requested speed decreases may occur when no speed
#                           increase is occurring at that time as well.]

#Example:
#manager_configuration:
#  power_on_delay: 20
#
#zone_configuration:
# - zone_conditions:
#   - name: air_cooled_chassis
#
#   zones:
#     - zone: 0
#       cooling_profiles:
#       - air
#       - all
#       full_speed: 10500
#       default_floor: 6000
#       increase_delay: 5
#       decrease_interval: 30
#
# - zone_conditions:
#   - name: water_and_air_cooled_chassis
#
#   zones:
#     - zone: 0
#       cooling_profiles:
#       - water
#       - all
#       full_speed: 4000
#       default_floor: 2500
#       increase_delay: 5
#       decrease_interval: 20