diff --git a/control/example/events.yaml b/control/example/events.yaml
index edc0779..ed62ce6 100644
--- a/control/example/events.yaml
+++ b/control/example/events.yaml
@@ -38,6 +38,11 @@
 #          - /system/chassis/motherboard/fan1
 #          - /system/chassis/motherboard/fan2
 #          - /system/chassis/motherboard/fan3
+#    - name: zone0_ambient
+#      description: Group of ambient temperature sensors for zone 0
+#      type: sensors
+#      members:
+#          - /temperature/ambient
 #
 #actions:
 #    - name: count_state_before_speed
@@ -46,6 +51,10 @@
 #          - count
 #          - property
 #          - speed
+#    - name: set_floor_from_average_sensor_value
+#      description: Set floor speed from first entry with average less than key
+#      parameters:
+#          - map
 #
 #events:
 #    - name: missing_before_high_speed
@@ -65,3 +74,41 @@
 #          speed:
 #              value: 10500
 #              type: uint64_t
+#    - name: update_air_cooled_floor_speed_based_on_ambient
+#      zone_conditions:
+#          - name: air_cooled_chassis
+#            zones:
+#                - 0
+#      group: zone0_ambient
+#      interface: xyz.openbmc_project.Sensor.Value
+#      property:
+#          name: Value
+#          type: int64_t
+#      action:
+#          name: set_floor_from_average_sensor_value
+#          map:
+#              value:
+#                  - 25: 3500
+#                  - 30: 4600
+#                  - 35: 5200
+#                  - 40: 5800
+#              type: std::map<int64_t, uint64_t>
+#    - name: update_water_cooled_floor_speed_based_on_ambient
+#      zone_conditions:
+#          - name: water_and_air_cooled_chassis
+#            zones:
+#                - 0
+#      group: zone0_ambient
+#      interface: xyz.openbmc_project.Sensor.Value
+#      property:
+#          name: Value
+#          type: int64_t
+#      action:
+#          name: set_floor_from_average_sensor_value
+#          map:
+#              value:
+#                  - 25: 2500
+#                  - 30: 3600
+#                  - 35: 4200
+#                  - 40: 4800
+#              type: std::map<int64_t, uint64_t>
diff --git a/control/example/zones.yaml b/control/example/zones.yaml
index fd6680a..8bd164f 100644
--- a/control/example/zones.yaml
+++ b/control/example/zones.yaml
@@ -31,6 +31,14 @@
 #       cooling_profiles:
 #         - [cooling profile]
 #       full_speed: [Full speed for the zone.]
+#       default_floor: [Default floor speed for the zone that fan speeds can
+#                       not go below.]
+#       increase_delay: [Number of seconds to delay additional speed increases
+#                        that are less than the speed increase that's currently
+#                        occurring.]
+#       decrease_interval: [A repeating number of seconds interval that
+#                           requested speed decreases may occur when no speed
+#                           increase is occurring at that time as well.]
 
 #Example:
 #manager_configuration:
@@ -46,6 +54,9 @@
 #       - air
 #       - all
 #       full_speed: 10500
+#       default_floor: 6000
+#       increase_delay: 5
+#       decrease_interval: 30
 #
 # - zone_conditions:
 #   - name: water_and_air_cooled_chassis
@@ -56,4 +67,6 @@
 #       - water
 #       - all
 #       full_speed: 4000
-
+#       default_floor: 2500
+#       increase_delay: 5
+#       decrease_interval: 20