diff --git a/README.md b/README.md
index df55110..695cdf8 100644
--- a/README.md
+++ b/README.md
@@ -1,64 +1,67 @@
-# phosphor-gpio-monitor
+# GPIO Monitoring
 
-This daemon accepts a command line parameter for monitoring single gpio
-line and take action if requested. This implementation uses GPIO keys
-and only supports monitoring single GPIO line, for multiple lines,
-user has to run this daemon seperately for each gpio line.
+## Implemented Daemons
 
-# phosphor-multi-gpio-monitor
+### `phosphor-gpio-monitor`
 
-This daemon accepts command line parameter as a well-defined GPIO
-configuration file in json format to monitor list of gpios from
-config file and take action defined in config based on gpio state
-change. It uses libgpiod library.
+This daemon accepts a command line parameter for monitoring single gpio line and
+take action if requested. This implementation uses GPIO keys and only supports
+monitoring single GPIO line, for multiple lines, user has to run this daemon
+seperately for each gpio line.
 
-# Difference
-New implementation (phosphor-multi-gpio-monitor) provides multiple gpio
-line monitoring in single instance of phosphor-multi-gpio-monitor running.
-It is very easy to add list of gpios into JSON config file and it also
-supports of GPIO line by name defined in kernel.
+### `phosphor-multi-gpio-monitor`
+
+This daemon accepts command line parameter as a well-defined GPIO configuration
+file in json format to monitor list of gpios from config file and take action
+defined in config based on gpio state change. It uses libgpiod library.
+
+### Difference
+
+New implementation (phosphor-multi-gpio-monitor) provides multiple gpio line
+monitoring in single instance of phosphor-multi-gpio-monitor running. It is very
+easy to add list of gpios into JSON config file and it also supports of GPIO
+line by name defined in kernel.
 
 ## Configuration
 
-There is a phosphor-multi-gpio-monitor.json file that defines details of
-GPIOs which is required to be monitored. This file can be replaced with
-a platform specific configuration file via bbappend.
+There is a phosphor-multi-gpio-monitor.json file that defines details of GPIOs
+which is required to be monitored. This file can be replaced with a platform
+specific configuration file via bbappend.
 
 Following are fields in json file
+
 1. Name: Name of gpio for reference.
 2. LineName: this is the line name defined in device tree for specific gpio
 3. GpioNum: GPIO offset, this field is optional if LineName is defined.
 4. ChipId: This is device name either offset ("0") or complete gpio device
-           ("gpiochip0"). This field is not required if LineName is defined.
-5. EventMon: Event of gpio to be monitored. This can be "FALLING", "RISING"
-             OR "BOTH". Default value for this is "BOTH".
+   ("gpiochip0"). This field is not required if LineName is defined.
+5. EventMon: Event of gpio to be monitored. This can be "FALLING", "RISING" OR
+   "BOTH". Default value for this is "BOTH".
 6. Target: This is an optional systemd service which will get started after
-           triggering event. A journal entry will be added for every event
-           occurs irrespective of this definition.
-7. Continue: This is a optional flag and if it is defined as true then this
-             gpio will be monitored continously. If not defined then
-             monitoring of this gpio will stop after first event.
+   triggering event. A journal entry will be added for every event occurs
+   irrespective of this definition.
+7. Continue: This is a optional flag and if it is defined as true then this gpio
+   will be monitored continously. If not defined then monitoring of this gpio
+   will stop after first event.
 
 ## Sample config file
 
+```json
 [
-	{
-		"Name": "PowerButton",
-		"LineName": "POWER_BUTTON",
-		"GpioNum": 34,
-		"ChipId": "gpiochip0",
-		"EventMon": "BOTH",
-		"Continue": true
-	},
-	{
-		"Name": "PowerGood",
-		"LineName": "PS_PWROK",
-		"EventMon": "FALLING",
-		"Continue": false
-	},
-	{
-		"Name": "SystemReset",
-		"GpioNum": 46,
-		"ChipId": "0"
-	}
+  {
+    "Name": "PowerButton",
+    "LineName": "POWER_BUTTON",
+    "GpioNum": 34,
+    "ChipId": "gpiochip0",
+    "EventMon": "BOTH",
+    "Continue": true
+  },
+  {
+    "Name": "PowerGood",
+    "LineName": "PS_PWROK",
+    "EventMon": "FALLING",
+    "Continue": false
+  },
+  { "Name": "SystemReset", "GpioNum": 46, "ChipId": "0" }
 ]
+```
diff --git a/phosphor-multi-gpio-monitor.json b/phosphor-multi-gpio-monitor.json
index 3508995..6d383ce 100644
--- a/phosphor-multi-gpio-monitor.json
+++ b/phosphor-multi-gpio-monitor.json
@@ -1,14 +1,14 @@
 [
-	{
-		"Name": "PowerButton",
-		"LineName": "POWER_BUTTON",
-		"EventMon": "BOTH",
-		"Continue": true
-	},
-	{
-		"Name": "PowerGood",
-		"ChipId": "0",
-		"GpioNum": 14,
-		"Continue": true
-	}
+    {
+        "Name": "PowerButton",
+        "LineName": "POWER_BUTTON",
+        "EventMon": "BOTH",
+        "Continue": true
+    },
+    {
+        "Name": "PowerGood",
+        "ChipId": "0",
+        "GpioNum": 14,
+        "Continue": true
+    }
 ]