tree 47b6fc0f3f234534c741bfc01e6bd7af73961b0b
parent e620803cafc182bd9ff3bf8324940f8e7ece84d8
author shamim ali <shamima@ami.com> 1646215966 +0530
committer Vernon Mauery <vernon.mauery@linux.intel.com> 1646698848 +0000

Set Sel time response code fixed in ntp mode

While setting the SEl time via Set Sel Time command with NTP enabled,
getting unspecified error.

SEL time can be set in Manual mode only. See Time Settings section in below link.

https://github.com/openbmc/phosphor-time-manager

TESTED:

before:

busctl get-property  xyz.openbmc_project.Settings /xyz/openbmc_project/time/sync_method xyz.openbmc_project.Time.Synchronization TimeS
yncMethod
s "xyz.openbmc_project.Time.Synchronization.Method.NTP"

ipmitool raw 0x0A 0x49 0x51 0xEF 0x99 0x07
Unable to send RAW command (channel=0x0 netfn=0xa lun=0x0 cmd=0x49 rsp=0xff): Unspecified error

After:

busctl get-property  xyz.openbmc_project.Settings /xyz/openbmc_project/time/sync_method xyz.openbmc_project.Time.Synchronization TimeS
yncMethod
s "xyz.openbmc_project.Time.Synchronization.Method.NTP"

ipmitool raw 0x0a 0x49 0xfe 0x0e 0x0 0x01
Unable to send RAW command (channel=0x0 netfn=0xa lun=0x0 cmd=0x49 rsp=0xd5): Command not supported in present state

Signed-off-by: shamim ali <shamima@ami.com>
Change-Id: If415a1a7c1e862cbbd4a724bb32390cf01d0f450