tree 32d1193ca8b0363913e7bb7b0164b9b2cf04c45d
parent 46590a3a955493e97fa83e040e9d1f9a0c6faa2c
author Yong Li <yong.b.li@linux.intel.com> 1539021585 +0800
committer Vernon Mauery <vernon.mauery@linux.intel.com> 1542674055 +0000

Implement IPMI ACPI set/get commands

The IPMI ACPI set/get power state commands are provided
to allow system software to tell a controller the present
ACPI power state of the system.

This is an independent setting that may not necessarily match the
actual power state of the system.

The commands are used to enable the reporting of the power state,
it does not control or change the power state.

The ACPI status will be saved into flash by settings manager.

Tested By:
Set ACPI:
ipmitool -H <IP>  -P 0penBmc -I lanplus raw 0x06 0x06 0x86 0x83
Get ACPI:
ipmitool -H <IP>  -P 0penBmc -I lanplus raw 0x06 0x07

Change-Id: I6d00c0aec931b98d6691d7c4a54698e08d317aa4
Signed-off-by: Yong Li <yong.b.li@linux.intel.com>