tree fae725dbf639c301a9b384b50ad56743e08cab5b
parent 5adc2d411be69b0c49e433d1aaf59cc093f8f0ee
author Jian Zhang <zhangjian.3032@bytedance.com> 1647508390 +0800
committer Vernon Mauery <vernon.mauery@linux.intel.com> 1649810228 +0000

host-ipmid: sol: Add get/set sol conf params command

Move set/get sol config parameter command from net-ipmid to
host-ipmid, these commands could be set by other interface,
not Lan only.

Notice:
In host-ipmid, will get/set the dbus properties only, need sol
manager register the signal to update sol manager when properties
changed.

When we use ipmitool command with channel num parameter, if you do not
specify the channel num, the default channel num always be 0xE in
command, and, we always treat channel 0xE channel is current channel.
So, if you use a command "ipmitool sol info" in console, because
this is not a lan channel, it will return "Error requesting SOL
parameter 'Set In Progress (0)': Invalid data field in request".

In net-ipmid use current channel only, ignored the channel number in
parameter, always return the current lan channel.

Tested:
1. Check sol conf.
ipmitool sol info 1
Set in progress                 : set-complete
Enabled                         : true
Force Encryption                : false
Force Authentication            : false
Privilege Level                 : ADMINISTRATOR
Character Accumulate Level (ms) : 500
Character Send Threshold        : 1
Retry Count                     : 7
Retry Interval (ms)             : 1000
Volatile Bit Rate (kbps)        : IPMI-Over-Serial-Setting
Non-Volatile Bit Rate (kbps)    : IPMI-Over-Serial-Setting
Payload Channel                 : 1 (0x01)
Payload Port                    : 623

2. Sel sol conf with a non-lan channel, in my env, lan channel num is 1
ipmitool sol set enabled false 1
ipmitool sol set force-encryption true 1
ipmitool sol set force-authentication true 1
ipmitool sol set privilege-level user 1
ipmitool sol set character-accumulate-level 200 1
ipmitool sol set character-send-threshold 200 1
ipmitool sol set retry-count 5 1
ipmitool sol set retry-interval 20 1

or

ipmitool -I lanplus -H x -U x -P x sol set enabled false
ipmitool -I lanplus -H x -U x -P x sol set force-encryption true
ipmitool -I lanplus -H x -U x -P x sol set force-authentication true
ipmitool -I lanplus -H x -U x -P x sol set privilege-level user
ipmitool -I lanplus -H x -U x -P x sol set character-accumulate-level 200
ipmitool -I lanplus -H x -U x -P x sol set character-send-threshold 200
ipmitool -I lanplus -H x -U x -P x sol set retry-count 5
ipmitool -I lanplus -H x -U x -P x sol set retry-interval 20

3. Check sol conf, same as set.
ipmitool sol info 1
Set in progress                 : set-complete
Enabled                         : false
Force Encryption                : true
Force Authentication            : true
Privilege Level                 : USER
Character Accumulate Level (ms) : 1000
Character Send Threshold        : 200
Retry Count                     : 5
Retry Interval (ms)             : 200
Volatile Bit Rate (kbps)        : IPMI-Over-Serial-Setting
Non-Volatile Bit Rate (kbps)    : IPMI-Over-Serial-Setting
Payload Channel                 : 1 (0x01)
Payload Port                    : 623

Change-Id: I1ac65881c41ad644ffc19720c0b00988eaca03e4
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>