Fix code to consume the secondary code
- The snooping daemon was coded to fill the Raw Value dbus
property with uint64_t signature.
- The intent behind this commit is to work with the changed
dbus backend from uint64_t to struct[uint64_t,array[byte]].
- The phosphor dbus interface change is documented in the below
commit :
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-dbus-interfaces/+/40903
Tested By:
- As the ibm systems does not a snooping port, i have done the
unittesting & all the unit tests are PASSED with a system that
has the above mentioned dbus interface change.
root@witherspoon:/tmp# ./post_reporter_test
[==========] Running 5 tests from 1 test suite.
[----------] Global test environment set-up.
[----------] 5 tests from PostReporterTest
[ RUN ] PostReporterTest.EmitsObjectsOnExpectedDbusPath
[ OK ] PostReporterTest.EmitsObjectsOnExpectedDbusPath (17 ms)
[ RUN ] PostReporterTest.AddsObjectWithExpectedName
[ OK ] PostReporterTest.AddsObjectWithExpectedName (5 ms)
[ RUN ] PostReporterTest.ValueReadsDefaultToZero
[ OK ] PostReporterTest.ValueReadsDefaultToZero (1 ms)
[ RUN ] PostReporterTest.SetValueToPositiveValueWorks
[ OK ] PostReporterTest.SetValueToPositiveValueWorks (2 ms)
[ RUN ] PostReporterTest.SetValueMultipleTimesWorks
[ OK ] PostReporterTest.SetValueMultipleTimesWorks (2 ms)
[----------] 5 tests from PostReporterTest (34 ms total)
[----------] Global test environment tear-down
[==========] 5 tests from 1 test suite ran. (40 ms total)
[ PASSED ] 5 tests.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: Id0a79fcddc827d34f9d2a61ab14d8c9c4be522b5
5 files changed