build: Add meson build
Changes to note,
- `with_systemdsystemunitdir` and `with_tmpfilesdir` is removed since it
is not being documented nor used in OpenBMC.
- Removed the Code coverage feature with `-DDHAVE_GCOV`, since it is not
used and meson covers it.
- Removed `--enable-oe-sdk` for using the OpenBMC SDK. It should work
directly with no change required.
Tested:
```
Jan 01 00:01:54 ipmid[709]: Try loading blob from persistent data
Jan 01 00:01:54 ipmid[709]: Stale blob data, resetting internals...
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/bios
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/image
Jan 01 00:01:56 ipmid[709]: config loaded: /flash/dummy
...
```
```
$ ls /usr/lib/blob-ipmid/
libfirmwareblob.so
libfirmwarecleanupblob.so libversionblob.so
```
Testing the service,
```
$ echo "hello" > /tmp/test.txt
$ burn_my_bmc -command update -layout dummy -image /tmp/test.txt
Sending over the firmware image.
Opening the verification file
Committing to /flash/verify to trigger service
Calling stat on /flash/verify session to check status
running
success
Returned success
succeeded
```
On the BMC.
```
/run/initramfs$ cat dummy
hello
```
Change-Id: I21c7c33bd62c0ee40681cb40da90125c125bea2f
Signed-off-by: Willy Tu <wltu@google.com>
diff --git a/bmc/firmware-handler/meson.build b/bmc/firmware-handler/meson.build
new file mode 100644
index 0000000..7d6b719
--- /dev/null
+++ b/bmc/firmware-handler/meson.build
@@ -0,0 +1,126 @@
+firmware_inc = include_directories('.')
+
+# phosphor-ipmi-flash config
+config_data = []
+if get_option('update-type') == 'static-layout'
+ if get_option('reboot-update')
+ config_data += 'config-static-bmc-reboot.json'
+ else
+ if get_option('update-status')
+ config_data += 'config-static-bmc-with-update-status.json'
+ else
+ config_data += 'config-static-bmc.json'
+ endif
+ endif
+endif
+
+if get_option('host-bios')
+ config_data += 'config-bios.json'
+endif
+
+foreach data : config_data
+ configure_file(
+ input: data + '.in',
+ output: data,
+ configuration: conf_data,
+ install: true,
+ install_dir: get_option('datadir') / 'phosphor-ipmi-flash')
+endforeach
+
+# temp files
+install_data(
+ 'phosphor-ipmi-flash.conf',
+ install_dir: get_option('libdir') / 'tmpfiles.d')
+
+# systemd configs
+systemd_data = [
+ 'phosphor-ipmi-flash-bmc-prepare.target',
+ 'phosphor-ipmi-flash-bmc-verify.target',
+ 'phosphor-ipmi-flash-bmc-update.target',
+]
+
+if get_option('host-bios')
+ systemd_data += [
+ 'phosphor-ipmi-flash-bios-prepare.target',
+ 'phosphor-ipmi-flash-bios-verify.target',
+ 'phosphor-ipmi-flash-bios-update.target']
+endif
+
+systemd = dependency('systemd')
+if systemd.found()
+ foreach data : systemd_data
+ configure_file(
+ input: data + '.in',
+ output: data,
+ configuration: conf_data,
+ install: true,
+ install_dir: systemd.get_variable(pkgconfig: 'systemdsystemunitdir'))
+ endforeach
+endif
+
+firmware_source = [
+ 'firmware_handlers_builder.cpp',
+ 'firmware_handler.cpp',
+ 'lpc_handler.cpp']
+
+if (get_option('lpc-type') == 'aspeed-lpc' or
+ not get_option('tests').disabled())
+ firmware_source += 'lpc_aspeed.cpp'
+endif
+
+if (get_option('lpc-type') == 'nuvoton-lpc' or
+ not get_option('tests').disabled())
+ firmware_source += 'lpc_nuvoton.cpp'
+endif
+
+if (get_option('p2a-type') == 'aspeed-p2a' or
+ not get_option('tests').disabled())
+ firmware_source += 'pci_handler.cpp'
+endif
+
+if get_option('p2a-type') == 'nuvoton-p2a-vga'
+ firmware_source += 'pci_nuvoton_handler.cpp'
+endif
+
+if get_option('p2a-type') == 'nuvoton-p2a-mbox'
+ firmware_source += 'pci_nuvoton_handler.cpp'
+endif
+
+if get_option('net-bridge')
+ firmware_source += 'net_handler.cpp'
+endif
+
+firmware_pre = declare_dependency(
+ include_directories: [root_inc, bmc_inc, firmware_inc],
+ dependencies : [
+ dependency('sdbusplus', fallback: ['sdbusplus', 'sdbusplus_dep']),
+ common_dep,
+ blobs_dep,
+ sys_dep,
+ phosphor_logging_dep])
+
+firmware_lib = static_library(
+ 'firmwareblob',
+ firmware_source,
+ conf_h,
+ implicit_include_directories: false,
+ dependencies: firmware_pre)
+
+firmware_dep = declare_dependency(
+ link_with: firmware_lib,
+ dependencies: firmware_pre)
+
+shared_module(
+ 'firmwareblob',
+ 'main.cpp',
+ implicit_include_directories: false,
+ dependencies: [
+ firmware_dep,
+ dependency('libipmid'),
+ ],
+ install: true,
+ install_dir: get_option('libdir') / 'blob-ipmid')
+
+if not get_option('tests').disabled()
+ subdir('test')
+endif
\ No newline at end of file