tree f33dfa6c7ca92b54c2eeb1b78a241e2e4fbbf48a
parent 109b4a5c1f1a9cad8176a05dc2066a61e5cf22ea
author Matt Spinler <spinler@us.ibm.com> 1742408243 -0500
committer Matt Spinler <spinler@us.ibm.com> 1742822132 +0000

PEL: Still create callout without full loc code

When PELs are created early during a power on reset, the service that
expands location codes may not be online yet.  Previously, callouts just
wouldn't be created if a location code couldn't be expanded.

Fix that so that a callout is still created with the unexpanded location
code, as that is still better than nothing.  In those cases, the
CC/PN/FN fields would also be empty since those are obtained by finding
the FRU inventory path from the location code.

Also create a similar callout in the case where the call to get the
inventory path from a location code fails.

This applies for callouts created via:
- The PEL message registry
- The device path lookup tables
- JSON FFDC files

Tested:
New unit tests that cover these paths pass.

On a system, after stopping vpd-manager.service, will get callouts like:
```
    "Callout Section": {
        "Callout Count":        "4",
        "Callouts": [{
            "FRU Type":         "Normal Hardware FRU",
            "Priority":         "Mandatory, replace all with this type as a unit",
            "Location Code":    "P0-C5",
            "Part Number":      "",
            "CCIN":             "",
            "Serial Number":    ""
        }, {
            "FRU Type":         "Normal Hardware FRU",
            "Priority":         "Mandatory, replace all with this type as a unit",
            "Location Code":    "E0",
            "Part Number":      "",
            "CCIN":             "",
            "Serial Number":    ""
        }, {
            "FRU Type":         "Normal Hardware FRU",
            "Priority":         "Lowest priority replacement",
            "Location Code":    "P0",
            "Part Number":      "",
            "CCIN":             "",
            "Serial Number":    ""
        }, {
            "FRU Type":         "Normal Hardware FRU",
            "Priority":         "Lowest priority replacement",
            "Location Code":    "P0-T4",
            "Part Number":      "",
            "CCIN":             "",
            "Serial Number":    ""
        }]
    }
```

Change-Id: Ia7e94f9d4848f78ba0b00023438c4db4135fed75
Signed-off-by: Matt Spinler <spinler@us.ibm.com>