/**
 * Copyright © 2019 IBM Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "extensions/openpower-pels/paths.hpp"
#include "extensions/openpower-pels/repository.hpp"
#include "pel_utils.hpp"

#include <ext/stdio_filebuf.h>

#include <filesystem>

#include <gtest/gtest.h>

using namespace openpower::pels;
namespace fs = std::filesystem;

/**
 * Clean the Repo after every testcase.
 * And because we have PEL object, also clean up
 * the log ID.
 */
class RepositoryTest : public CleanLogID
{
  protected:
    void SetUp() override
    {
        repoPath = getPELRepoPath();
    }

    void TearDown() override
    {
        fs::remove_all(repoPath);
    }

    fs::path repoPath;
};

TEST_F(RepositoryTest, FilenameTest)
{
    BCDTime date = {0x20, 0x30, 0x11, 0x28, 0x13, 0x6, 0x7, 0x8};

    EXPECT_EQ(Repository::getPELFilename(0x12345678, date),
              "2030112813060708_12345678");

    EXPECT_EQ(Repository::getPELFilename(0xAABBCCDD, date),
              "2030112813060708_AABBCCDD");

    EXPECT_EQ(Repository::getPELFilename(0x3AFF1, date),
              "2030112813060708_0003AFF1");

    EXPECT_EQ(Repository::getPELFilename(100, date),
              "2030112813060708_00000064");

    EXPECT_EQ(Repository::getPELFilename(0, date), "2030112813060708_00000000");
}

TEST_F(RepositoryTest, AddTest)
{
    Repository repo{repoPath};
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data);

    repo.add(pel);

    // Check that the PEL was stored where it was supposed to be,
    // and that it wrote the PEL data.
    const auto ts = pel->privateHeader().commitTimestamp();
    auto name = Repository::getPELFilename(pel->id(), ts);

    fs::path file = repoPath / "logs" / name;
    EXPECT_TRUE(fs::exists(file));

    auto newData = readPELFile(file);
    auto pelData = pel->data();
    EXPECT_EQ(*newData, pelData);

    EXPECT_EQ(repo.lastPelID(), pel->id());
}

TEST_F(RepositoryTest, RemoveTest)
{
    using pelID = Repository::LogID::Pel;
    using obmcID = Repository::LogID::Obmc;

    // Add and remove a PEL from the repo

    Repository repo{repoPath};

    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data, 1);

    pel->assignID();
    Repository::LogID id{pelID{pel->id()}, obmcID{pel->obmcLogID()}};

    repo.add(pel);

    auto removedID = repo.remove(id);
    ASSERT_TRUE(removedID);
    EXPECT_EQ(*removedID, id);

    EXPECT_FALSE(repo.hasPEL(id));

    // Try to remove it again, not there
    EXPECT_FALSE(repo.remove(id));
}

TEST_F(RepositoryTest, RestoreTest)
{
    using pelID = Repository::LogID::Pel;
    using obmcID = Repository::LogID::Obmc;

    std::vector<Repository::LogID> ids;

    {
        Repository repo{repoPath};

        // Add some PELs to the repository
        {
            auto data = pelDataFactory(TestPELType::pelSimple);
            auto pel = std::make_unique<PEL>(data, 1);
            pel->assignID();
            repo.add(pel);
            ids.emplace_back(pelID(pel->id()), obmcID(1));
        }
        {
            auto data = pelDataFactory(TestPELType::pelSimple);
            auto pel = std::make_unique<PEL>(data, 2);
            pel->assignID();
            repo.add(pel);
            ids.emplace_back(pelID(pel->id()), obmcID(2));
        }

        // Check they're there
        EXPECT_TRUE(repo.hasPEL(ids[0]));
        EXPECT_TRUE(repo.hasPEL(ids[1]));

        // Do some other search tests while we're here.

        // Search based on PEL ID
        Repository::LogID id(pelID(ids[0].pelID));
        EXPECT_TRUE(repo.hasPEL(id));

        // Search based on OBMC log ID
        id.pelID.id = 0;
        id.obmcID = ids[0].obmcID;
        EXPECT_TRUE(repo.hasPEL(id));

        // ... based on the other PEL ID
        id.pelID = ids[1].pelID;
        id.obmcID.id = 0;
        EXPECT_TRUE(repo.hasPEL(id));

        // Not found
        id.pelID.id = 99;
        id.obmcID.id = 100;
        EXPECT_FALSE(repo.hasPEL(id));

        // Try to remove it anyway
        EXPECT_FALSE(repo.remove(id));
    }

    {
        // Restore and check they're still there, then
        // remove them.
        Repository repo{repoPath};
        EXPECT_TRUE(repo.hasPEL(ids[0]));
        EXPECT_TRUE(repo.hasPEL(ids[1]));

        repo.remove(ids[0]);
        EXPECT_FALSE(repo.hasPEL(ids[0]));

        repo.remove(ids[1]);
        EXPECT_FALSE(repo.hasPEL(ids[1]));
    }
}

TEST_F(RepositoryTest, TestGetPELData)
{
    using ID = Repository::LogID;
    Repository repo{repoPath};

    ID badID{ID::Pel(42)};
    auto noData = repo.getPELData(badID);
    EXPECT_FALSE(noData);

    // Add a PEL to the repo, and get the data back with getPELData.
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto dataCopy = data;
    auto pel = std::make_unique<PEL>(data);
    auto pelID = pel->id();
    repo.add(pel);

    ID id{ID::Pel(pelID)};
    auto pelData = repo.getPELData(id);

    ASSERT_TRUE(pelData);
    EXPECT_EQ(dataCopy, *pelData);
}

TEST_F(RepositoryTest, TestForEach)
{
    Repository repo{repoPath};

    // Add 2 PELs
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data);
    repo.add(pel);

    pel = std::make_unique<PEL>(data);
    pel->assignID();
    pel->setCommitTime();
    repo.add(pel);

    // Make a function that saves the IDs
    std::vector<uint32_t> ids;
    Repository::ForEachFunc f1 = [&ids](const PEL& pel) {
        ids.push_back(pel.id());
        return false;
    };

    repo.for_each(f1);

    EXPECT_EQ(ids.size(), 2);

    // Stop after the first time in.
    Repository::ForEachFunc f2 = [&ids](const PEL& pel) {
        ids.push_back(pel.id());
        return true;
    };

    ids.clear();
    repo.for_each(f2);
    EXPECT_EQ(ids.size(), 1);
}

TEST_F(RepositoryTest, TestSubscriptions)
{
    std::vector<uint32_t> added;
    std::vector<uint32_t> removed;

    Repository::AddCallback ac = [&added](const PEL& pel) {
        added.push_back(pel.id());
    };

    Repository::DeleteCallback dc = [&removed](uint32_t id) {
        removed.push_back(id);
    };

    Repository repo{repoPath};
    repo.subscribeToAdds("test", ac);
    repo.subscribeToDeletes("test", dc);

    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data);
    auto pelID = pel->id();
    repo.add(pel);

    EXPECT_EQ(added.size(), 1);

    using ID = Repository::LogID;
    ID id{ID::Pel(pelID)};
    repo.remove(id);

    EXPECT_EQ(removed.size(), 1);

    repo.unsubscribeFromAdds("test");
    repo.unsubscribeFromDeletes("test");

    added.clear();
    removed.clear();

    repo.add(pel);
    EXPECT_EQ(added.size(), 0);

    repo.remove(id);
    EXPECT_EQ(removed.size(), 0);
}

TEST_F(RepositoryTest, TestGetAttributes)
{
    uint32_t pelID = 0;
    std::bitset<16> actionFlags;

    {
        Repository repo{repoPath};

        // Add a PEL to the repo
        auto data = pelDataFactory(TestPELType::pelSimple);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);

        pelID = pel->id();
        actionFlags = pel->userHeader().actionFlags();

        using ID = Repository::LogID;
        ID id{ID::Pel(pelID)};

        auto a = repo.getPELAttributes(id);
        EXPECT_TRUE(a);
        EXPECT_EQ((*a).get().actionFlags, actionFlags);

        id.pelID.id = 0;
        a = repo.getPELAttributes(id);
        EXPECT_FALSE(a);
    }

    {
        // Restore the repository and check again
        Repository repo{repoPath};

        using ID = Repository::LogID;
        ID id{ID::Pel(pelID)};

        auto a = repo.getPELAttributes(id);
        EXPECT_TRUE(a);
        EXPECT_EQ((*a).get().actionFlags, actionFlags);

        id.pelID.id = 0;
        a = repo.getPELAttributes(id);
        EXPECT_FALSE(a);
    }
}

TEST_F(RepositoryTest, TestSetHostState)
{
    // Add a PEL to the repo
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data);
    using ID = Repository::LogID;
    ID id{ID::Pel(pel->id())};

    {
        Repository repo{repoPath};

        repo.add(pel);

        auto a = repo.getPELAttributes(id);
        EXPECT_EQ((*a).get().hostState, TransmissionState::newPEL);

        repo.setPELHostTransState(pel->id(), TransmissionState::acked);

        // First, check the attributes
        a = repo.getPELAttributes(id);
        EXPECT_EQ((*a).get().hostState, TransmissionState::acked);

        // Next, check the PEL data itself
        auto pelData = repo.getPELData(id);
        PEL newPEL{*pelData};
        EXPECT_EQ(newPEL.hostTransmissionState(), TransmissionState::acked);
    }

    {
        // Now restore, and check again
        Repository repo{repoPath};

        // First, check the attributes
        auto a = repo.getPELAttributes(id);
        EXPECT_EQ((*a).get().hostState, TransmissionState::acked);

        // Next, check the PEL data itself
        auto pelData = repo.getPELData(id);
        PEL newPEL{*pelData};
        EXPECT_EQ(newPEL.hostTransmissionState(), TransmissionState::acked);
    }
}

TEST_F(RepositoryTest, TestSetHMCState)
{
    // Add a PEL to the repo
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data);
    using ID = Repository::LogID;
    ID id{ID::Pel(pel->id())};

    {
        Repository repo{repoPath};

        repo.add(pel);

        auto a = repo.getPELAttributes(id);
        EXPECT_EQ((*a).get().hmcState, TransmissionState::newPEL);

        repo.setPELHMCTransState(pel->id(), TransmissionState::acked);

        // First, check the attributes
        a = repo.getPELAttributes(id);
        EXPECT_EQ((*a).get().hmcState, TransmissionState::acked);

        // Next, check the PEL data itself
        auto pelData = repo.getPELData(id);
        PEL newPEL{*pelData};
        EXPECT_EQ(newPEL.hmcTransmissionState(), TransmissionState::acked);
    }

    {
        // Now restore, and check again
        Repository repo{repoPath};

        // First, check the attributes
        auto a = repo.getPELAttributes(id);
        EXPECT_EQ((*a).get().hmcState, TransmissionState::acked);

        // Next, check the PEL data itself
        auto pelData = repo.getPELData(id);
        PEL newPEL{*pelData};
        EXPECT_EQ(newPEL.hmcTransmissionState(), TransmissionState::acked);
    }
}

TEST_F(RepositoryTest, TestGetPELFD)
{
    Repository repo{repoPath};

    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data);
    pel->setCommitTime();
    pel->assignID();

    repo.add(pel);

    using ID = Repository::LogID;
    ID id{ID::Pel(pel->id())};

    auto fd = repo.getPELFD(id);

    EXPECT_TRUE(fd);

    // Get the size
    struct stat s;
    int r = fstat(*fd, &s);
    ASSERT_EQ(r, 0);

    auto size = s.st_size;

    // Read the PEL data out of the FD
    FILE* fp = fdopen(*fd, "r");
    ASSERT_NE(fp, nullptr);

    std::vector<uint8_t> newData;
    newData.resize(size);
    r = fread(newData.data(), 1, size, fp);
    EXPECT_EQ(r, size);

    PEL newPEL{newData};

    EXPECT_TRUE(newPEL.valid());
    EXPECT_EQ(newPEL.id(), pel->id());

    fclose(fp);

    // Call getPELFD again, this time with a bad ID
    id.pelID.id = 42;
    fd = repo.getPELFD(id);

    EXPECT_FALSE(fd);
}

// Test the repo size statistics
TEST_F(RepositoryTest, TestRepoSizes)
{
    uint32_t id = 1;

    Repository repo{repoPath, 10000, 500};

    // All of the size stats are the sizes on disk a PEL takes up,
    // which is different than the file size.  Disk usage seems
    // to have a granularity of 4096 bytes.  This probably shouldn't
    // be hardcoded, but I don't know how to look it up dynamically.

    // All sizes are zero
    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 0);
        EXPECT_EQ(stats.bmc, 0);
        EXPECT_EQ(stats.nonBMC, 0);
        EXPECT_EQ(stats.bmcServiceable, 0);
        EXPECT_EQ(stats.bmcInfo, 0);
        EXPECT_EQ(stats.nonBMCServiceable, 0);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }

    // Add a 2000B BMC predictive error
    auto data = pelFactory(id++, 'O', 0x20, 0x8800, 2000);
    auto pel = std::make_unique<PEL>(data);
    auto pelID1 = pel->id();
    repo.add(pel);

    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 4096);
        EXPECT_EQ(stats.bmc, 4096);
        EXPECT_EQ(stats.nonBMC, 0);
        EXPECT_EQ(stats.bmcServiceable, 4096);
        EXPECT_EQ(stats.bmcInfo, 0);
        EXPECT_EQ(stats.nonBMCServiceable, 0);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }

    // Add a 5000B BMC informational error
    data = pelFactory(id++, 'O', 0x00, 0x8800, 5000);
    pel = std::make_unique<PEL>(data);
    auto pelID2 = pel->id();
    repo.add(pel);

    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 4096 + 8192);
        EXPECT_EQ(stats.bmc, 4096 + 8192);
        EXPECT_EQ(stats.nonBMC, 0);
        EXPECT_EQ(stats.bmcServiceable, 4096);
        EXPECT_EQ(stats.bmcInfo, 8192);
        EXPECT_EQ(stats.nonBMCServiceable, 0);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }

    // Add a 4000B Hostboot unrecoverable error
    data = pelFactory(id++, 'B', 0x40, 0x8800, 4000);
    pel = std::make_unique<PEL>(data);
    auto pelID3 = pel->id();
    repo.add(pel);

    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 4096 + 8192 + 4096);
        EXPECT_EQ(stats.bmc, 4096 + 8192);
        EXPECT_EQ(stats.nonBMC, 4096);
        EXPECT_EQ(stats.bmcServiceable, 4096);
        EXPECT_EQ(stats.bmcInfo, 8192);
        EXPECT_EQ(stats.nonBMCServiceable, 4096);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }

    // Add a 5000B Hostboot informational error
    data = pelFactory(id++, 'B', 0x00, 0x8800, 5000);
    pel = std::make_unique<PEL>(data);
    auto pelID4 = pel->id();
    repo.add(pel);

    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 4096 + 8192 + 4096 + 8192);
        EXPECT_EQ(stats.bmc, 4096 + 8192);
        EXPECT_EQ(stats.nonBMC, 4096 + 8192);
        EXPECT_EQ(stats.bmcServiceable, 4096);
        EXPECT_EQ(stats.bmcInfo, 8192);
        EXPECT_EQ(stats.nonBMCServiceable, 4096);
        EXPECT_EQ(stats.nonBMCInfo, 8192);
    }

    // Remove the BMC serviceable error
    using ID = Repository::LogID;
    ID id1{ID::Pel(pelID1)};

    repo.remove(id1);
    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 8192 + 4096 + 8192);
        EXPECT_EQ(stats.bmc, 8192);
        EXPECT_EQ(stats.nonBMC, 4096 + 8192);
        EXPECT_EQ(stats.bmcServiceable, 0);
        EXPECT_EQ(stats.bmcInfo, 8192);
        EXPECT_EQ(stats.nonBMCServiceable, 4096);
        EXPECT_EQ(stats.nonBMCInfo, 8192);
    }

    // Remove the Hostboot informational error
    ID id4{ID::Pel(pelID4)};

    repo.remove(id4);
    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 8192 + 4096);
        EXPECT_EQ(stats.bmc, 8192);
        EXPECT_EQ(stats.nonBMC, 4096);
        EXPECT_EQ(stats.bmcServiceable, 0);
        EXPECT_EQ(stats.bmcInfo, 8192);
        EXPECT_EQ(stats.nonBMCServiceable, 4096);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }

    // Remove the BMC informational error
    ID id2{ID::Pel(pelID2)};

    repo.remove(id2);
    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 4096);
        EXPECT_EQ(stats.bmc, 0);
        EXPECT_EQ(stats.nonBMC, 4096);
        EXPECT_EQ(stats.bmcServiceable, 0);
        EXPECT_EQ(stats.bmcInfo, 0);
        EXPECT_EQ(stats.nonBMCServiceable, 4096);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }

    // Remove the hostboot unrecoverable error
    ID id3{ID::Pel(pelID3)};

    repo.remove(id3);
    {
        const auto& stats = repo.getSizeStats();
        EXPECT_EQ(stats.total, 0);
        EXPECT_EQ(stats.bmc, 0);
        EXPECT_EQ(stats.nonBMC, 0);
        EXPECT_EQ(stats.bmcServiceable, 0);
        EXPECT_EQ(stats.bmcInfo, 0);
        EXPECT_EQ(stats.nonBMCServiceable, 0);
        EXPECT_EQ(stats.nonBMCInfo, 0);
    }
}

// Prune PELs, when no HMC/OS/PHYP acks
TEST_F(RepositoryTest, TestPruneNoAcks)
{
    Repository repo{repoPath, 4096 * 20, 100};

    // Add 10 4096B (on disk) PELs of BMC nonInfo, Info and nonBMC info,
    // nonInfo errors. None of them acked by PHYP, host, or HMC.
    for (uint32_t i = 1; i <= 10; i++)
    {
        // BMC predictive
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);

        // BMC info
        data = pelFactory(i + 100, 'O', 0x0, 0x8800, 500);
        pel = std::make_unique<PEL>(data);
        repo.add(pel);

        // Hostboot predictive
        data = pelFactory(i + 200, 'B', 0x20, 0x8800, 500);
        pel = std::make_unique<PEL>(data);
        repo.add(pel);

        // Hostboot info
        data = pelFactory(i + 300, 'B', 0x0, 0x8800, 500);
        pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    const auto& sizes = repo.getSizeStats();
    EXPECT_EQ(sizes.total, 4096 * 40);

    // Sanity check the very first PELs with IDs 1 to 4 are
    // there so we can check they are removed after the prune.
    for (uint32_t i = 1; i < 5; i++)
    {
        Repository::LogID id{Repository::LogID::Pel{i}};
        EXPECT_TRUE(repo.getPELAttributes(id));
    }

    // Prune down to 15%/30%/15%/30% = 90% total
    auto IDs = repo.prune();

    // Check the final sizes
    EXPECT_EQ(sizes.total, 4096 * 18);            // 90% of 20 PELs
    EXPECT_EQ(sizes.bmcInfo, 4096 * 3);           // 15% of 20 PELs
    EXPECT_EQ(sizes.bmcServiceable, 4096 * 6);    // 30% of 20 PELs
    EXPECT_EQ(sizes.nonBMCInfo, 4096 * 3);        // 15% of 20 PELs
    EXPECT_EQ(sizes.nonBMCServiceable, 4096 * 6); // 30% of 20 PELs

    // Check that at least the 4 oldest, which are the oldest of
    // each type, were removed.
    for (uint32_t i = 1; i < 5; i++)
    {
        Repository::LogID id{Repository::LogID::Pel{i}};
        EXPECT_FALSE(repo.getPELAttributes(id));

        // Make sure the corresponding OpenBMC event log ID which is
        // 500 + the PEL ID is in the list.
        EXPECT_TRUE(std::find(IDs.begin(), IDs.end(), 500 + i) != IDs.end());
    }
}

// Test that if filled completely with 1 type of PEL, that
// pruning still works properly
TEST_F(RepositoryTest, TestPruneInfoOnly)
{
    Repository repo{repoPath, 4096 * 22, 100};

    // Fill 4096*23 bytes on disk of BMC info PELs
    for (uint32_t i = 1; i <= 23; i++)
    {
        auto data = pelFactory(i, 'O', 0, 0x8800, 1000);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    const auto& sizes = repo.getSizeStats();
    EXPECT_EQ(sizes.total, 4096 * 23);

    // Pruning to 15% of 4096 * 22 will leave 3 4096B PELs.

    // Sanity check the oldest 20 are there so when they
    // get pruned below we'll know they were removed.
    for (uint32_t i = 1; i <= 20; i++)
    {
        Repository::LogID id{Repository::LogID::Pel{i}};
        EXPECT_TRUE(repo.getPELAttributes(id));
    }

    auto IDs = repo.prune();

    // Check the final sizes
    EXPECT_EQ(sizes.total, 4096 * 3);
    EXPECT_EQ(sizes.bmcInfo, 4096 * 3);
    EXPECT_EQ(sizes.bmcServiceable, 0);
    EXPECT_EQ(sizes.nonBMCInfo, 0);
    EXPECT_EQ(sizes.nonBMCServiceable, 0);

    EXPECT_EQ(IDs.size(), 20);

    // Can no longer find the oldest 20 PELs.
    for (uint32_t i = 1; i <= 20; i++)
    {
        Repository::LogID id{Repository::LogID::Pel{i}};
        EXPECT_FALSE(repo.getPELAttributes(id));
        EXPECT_TRUE(std::find(IDs.begin(), IDs.end(), 500 + i) != IDs.end());
    }
}

// Test that the HMC/OS/PHYP ack values affect the
// pruning order.
TEST_F(RepositoryTest, TestPruneWithAcks)
{
    Repository repo{repoPath, 4096 * 20, 100};

    // Fill 30% worth of BMC non-info non-acked PELs
    for (uint32_t i = 1; i <= 6; i++)
    {
        // BMC predictive
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    // Add another PEL to push it over the 30%, each time adding
    // a different type that should be pruned before the above ones
    // even though those are older.
    for (uint32_t i = 1; i <= 3; i++)
    {
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        auto idToDelete = pel->obmcLogID();
        repo.add(pel);

        if (0 == i)
        {
            repo.setPELHMCTransState(pel->id(), TransmissionState::acked);
        }
        else if (1 == i)
        {
            repo.setPELHostTransState(pel->id(), TransmissionState::acked);
        }
        else
        {
            repo.setPELHostTransState(pel->id(), TransmissionState::sent);
        }

        auto IDs = repo.prune();
        EXPECT_EQ(repo.getSizeStats().total, 4096 * 6);

        // The newest PEL should be the one deleted
        ASSERT_EQ(IDs.size(), 1);
        EXPECT_EQ(IDs[0], idToDelete);
    }
}

// Test that the total number of PELs limit is enforced.
TEST_F(RepositoryTest, TestPruneTooManyPELs)
{
    Repository repo{repoPath, 4096 * 100, 10};

    // Add 10, which is the limit and is still OK
    for (uint32_t i = 1; i <= 10; i++)
    {
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    auto IDs = repo.prune();

    // Nothing pruned yet
    EXPECT_TRUE(IDs.empty());

    // Add 1 more PEL which will be too many.
    {
        auto data = pelFactory(11, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    // Now that's it's over the limit of 10, it will bring it down
    // to 80%, which is 8 after it removes 3.
    IDs = repo.prune();
    EXPECT_EQ(repo.getSizeStats().total, 4096 * 8);
    ASSERT_EQ(IDs.size(), 3);

    // Check that it deleted the oldest ones.
    // The OpenBMC log ID is the PEL ID + 500.
    EXPECT_EQ(IDs[0], 500 + 1);
    EXPECT_EQ(IDs[1], 500 + 2);
    EXPECT_EQ(IDs[2], 500 + 3);
}

// Test the sizeWarning function
TEST_F(RepositoryTest, TestSizeWarning)
{
    uint32_t id = 1;
    Repository repo{repoPath, 100 * 4096, 500};

    EXPECT_FALSE(repo.sizeWarning());

    // 95% is still OK (disk size for these is 4096)
    for (uint32_t i = 1; i <= 95; i++)
    {
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    EXPECT_FALSE(repo.sizeWarning());

    // Now at 96%
    auto data = pelFactory(id++, 'B', 0x20, 0x8800, 500);
    auto pel = std::make_unique<PEL>(data);
    repo.add(pel);

    EXPECT_TRUE(repo.sizeWarning());
}

// Test sizeWarning when there are too many PEls
TEST_F(RepositoryTest, TestSizeWarningNumPELs)
{
    Repository repo{repoPath, 4096 * 100, 5};

    EXPECT_FALSE(repo.sizeWarning());

    for (uint32_t i = 1; i <= 5; i++)
    {
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    EXPECT_FALSE(repo.sizeWarning());

    // Add 1 more for a total of 6, now over the limit
    {
        auto data = pelFactory(6, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    EXPECT_TRUE(repo.sizeWarning());
}

// Test existense of archive file
TEST_F(RepositoryTest, TestArchiveFile)
{
    using pelID = Repository::LogID::Pel;
    using obmcID = Repository::LogID::Obmc;

    // Add and remove a PEL from the repo

    Repository repo{repoPath};

    fs::path archivePath = repoPath / "logs" / "archive";
    EXPECT_TRUE(fs::exists(archivePath));

    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data, 1);

    pel->assignID();
    Repository::LogID id{pelID{pel->id()}, obmcID{pel->obmcLogID()}};

    repo.add(pel);

    auto path = repoPath / "logs" /
                Repository::getPELFilename(pel->id(), pel->commitTime());
    EXPECT_TRUE(fs::exists(path));

    auto removedID = repo.remove(id);
    ASSERT_TRUE(removedID);
    EXPECT_EQ(*removedID, id);

    archivePath /= Repository::getPELFilename(pel->id(), pel->commitTime());
    EXPECT_TRUE(fs::exists(archivePath));

    EXPECT_FALSE(repo.hasPEL(id));
}

// Test archive folder size with sizeWarning function
TEST_F(RepositoryTest, TestArchiveSize)
{
    using pelID = Repository::LogID::Pel;
    using obmcID = Repository::LogID::Obmc;

    // Create repo with max PEL=500 and space=4096*100
    Repository repo{repoPath, 100 * 4096, 500};

    // Fill 94% (disk size for these is 4096)
    for (uint32_t i = 1; i <= 94; i++)
    {
        auto data = pelFactory(i, 'O', 0x20, 0x8800, 500);
        auto pel = std::make_unique<PEL>(data);
        repo.add(pel);
    }

    // Add another PEL which makes 95% still ok
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data, 1);
    pel->assignID();
    Repository::LogID id{pelID{pel->id()}, obmcID{pel->obmcLogID()}};
    repo.add(pel);

    // With 95% full expect no size warning
    EXPECT_FALSE(repo.sizeWarning());

    // Remove last created PEL
    repo.remove(id);

    // Repo is 94% full with one PEL in archive log
    // Total repo size 95% full (including archive) still ok
    EXPECT_FALSE(repo.sizeWarning());

    // Confirm the repo size 94% full
    const auto& sizes = repo.getSizeStats();
    EXPECT_EQ(sizes.total, 4096 * 94);

    // Make sure archive contain the one deleted file
    fs::path archivePath = repoPath / "logs" / "archive";
    archivePath /= Repository::getPELFilename(pel->id(), pel->commitTime());
    EXPECT_TRUE(fs::exists(archivePath));

    // Add another PEL which makes repo 95% full
    data = pelDataFactory(TestPELType::pelSimple);
    pel = std::make_unique<PEL>(data, 1);
    pel->assignID();
    Repository::LogID idx{pelID{pel->id()}, obmcID{pel->obmcLogID()}};
    repo.add(pel);

    // Repo with 95% full + one archive file becomes 96%
    // which is greater than the warning
    // expect archive file to be deleted to get repo size back to 95%
    EXPECT_FALSE(repo.sizeWarning());
    EXPECT_FALSE(fs::exists(archivePath));
}

TEST_F(RepositoryTest, GetLogIDFoundTC)
{
    // Add and Check the created LogId

    Repository repo{repoPath};
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data, 1);

    pel->assignID();

    repo.add(pel);

    // Getting by PEL Id
    Repository::LogID idWithPelId{Repository::LogID::Pel(pel->id())};
    auto logID = repo.getLogID(idWithPelId);
    ASSERT_TRUE(logID.has_value());
    EXPECT_EQ(logID->obmcID.id, pel->obmcLogID());
    EXPECT_EQ(logID->pelID.id, pel->id());

    // Getting by OBMC Event Log Id
    Repository::LogID idWithObmcLogId{
        Repository::LogID::Obmc(pel->obmcLogID())};
    logID = repo.getLogID(idWithObmcLogId);
    ASSERT_TRUE(logID.has_value());
    EXPECT_EQ(logID->obmcID.id, pel->obmcLogID());
    EXPECT_EQ(logID->pelID.id, pel->id());
}

TEST_F(RepositoryTest, GetLogIDNotFoundTC)
{
    // Add and Check the created LogId

    Repository repo{repoPath};
    auto data = pelDataFactory(TestPELType::pelSimple);
    auto pel = std::make_unique<PEL>(data, 1);

    pel->assignID();

    repo.add(pel);

    // Getting by invalid PEL Id
    Repository::LogID idWithPelId{Repository::LogID::Pel(0xFFFFFFFF)};
    auto logID = repo.getLogID(idWithPelId);
    ASSERT_TRUE(!logID.has_value());

    // Getting by invalid OBMC Event Log ID
    Repository::LogID idWithObmcLogId{Repository::LogID::Obmc(0xFFFFFFFF)};
    logID = repo.getLogID(idWithObmcLogId);
    ASSERT_TRUE(!logID.has_value());
}