tree: 72dc3101e857d4c6f1e2427e433706c1d4d1a345 [path history] [tgz]
  1. callouts/
  2. config/
  3. dist/
  4. docs/
  5. extensions/
  6. gen/
  7. lib/
  8. phosphor-rsyslog-config/
  9. subprojects/
  10. test/
  11. tools/
  12. xyz/
  13. .clang-format
  14. .gitignore
  15. .lcovrc
  16. .shellcheck
  17. config_main.h
  18. elog_block.hpp
  19. elog_entry.cpp
  20. elog_entry.hpp
  21. elog_meta.cpp
  22. elog_meta.hpp
  23. elog_serialize.cpp
  24. elog_serialize.hpp
  25. extensions.cpp
  26. extensions.hpp
  27. LICENSE
  28. log_manager.cpp
  29. log_manager.hpp
  30. log_manager_main.cpp
  31. logging_test.cpp
  32. MAINTAINERS
  33. meson.build
  34. meson_options.txt
  35. OWNERS
  36. README.md
  37. setup.cfg
  38. util.cpp
  39. util.hpp
README.md

phosphor-logging

The phosphor logging repository provides mechanisms for event and journal logging.

Table Of Contents

To Build

To build this package, do the following steps:

  1. meson builddir
  2. ninja -c builddir

Structured Logging

phosphor-logging provides APIs to add program logging information to the systemd-journal and it is preferred that this logging data is formatted in a structured manner (using the facilities provided by the APIs).

See Structured Logging for more details on this API.

Event Logs

OpenBMC event logs are a collection of D-Bus interfaces owned by phosphor-log-manager that reside at /xyz/openbmc_project/logging/entry/X, where X starts at 1 and is incremented for each new log.

The interfaces are:

On platforms that make use of these event logs, the intent is that they are the common event log representation that other types of event logs can be created from. For example, there is code to convert these into both Redfish and IPMI event logs, in addition to the event log extensions mentioned below.

The logging daemon has the ability to add callout associations to an event log based on text in the AdditionalData property. A callout is a link to the inventory item(s) that were the cause of the event log. See here for details.

Creating Event Logs In Code

There are two approaches to creating event logs in OpenBMC code. The first makes use of the systemd journal to store metadata needed for the log, and the second is a plain D-Bus method call.

Journal Based Event Log Creation

Event logs can be created by using phosphor-logging APIs to commit sdbusplus exceptions. These APIs write to the journal, and then call a Commit D-Bus method on the logging daemon to create the event log using the information it put in the journal.

The APIs are found in <phosphor-logging/elog.hpp>:

  • elog(): Throw an sdbusplus error.
  • commit(): Catch an error thrown by elog(), and commit it to create the event log.
  • report(): Create an event log from an sdbusplus error without throwing the exception first.

Any errors passed into these APIs must be known to phosphor-logging, usually by being defined in <phosphor-logging/elog-errors.hpp>. The errors must also be known by sdbusplus, and be defined in their corresponding error.hpp. See below for details on how get errors into these headers.

Example:

#include <phosphor-logging/elog-errors.hpp>
#include <phosphor-logging/elog.hpp>
#include <xyz/openbmc_project/Common/error.hpp>
...
using InternalFailure =
    sdbusplus::xyz::openbmc_project::Common::Error::InternalFailure;
...
if (somethingBadHappened)
{
    phosphor::logging::report<InternalFailure>();
}

Alternatively, to throw, catch, and then commit the error:

try
{
    phosphor::logging::elog<InternalFailure>();
}
catch (InternalFailure& e)
{
    phosphor::logging::commit<InternalFailure>();
}

Metadata can be added to event logs to add debug data captured at the time of the event. It shows up in the AdditionalData property in the xyz.openbmc_project.Logging.Entry interface. Metadata is passed in via the elog() or report() functions, which write it to the journal. The metadata must be predefined for the error in the metadata YAML so that the daemon knows to look for it in the journal when it creates the event log.

Example:

#include <phosphor-logging/elog-errors.hpp>
#include <phosphor-logging/elog.hpp>
#include <xyz/openbmc_project/Control/Device/error.hpp>
...
using WriteFailure =
    sdbusplus::xyz::openbmc_project::Control::Device::Error::WriteFailure;
using metadata =
    xyz::openbmc_project::Control::Device::WriteFailure;
...
if (somethingBadHappened)
{
    phosphor::logging::report<WriteFailure>(metadata::CALLOUT_ERRNO(5),
                              metadata::CALLOUT_DEVICE_PATH("some path"));
}

In the above example, the AdditionalData property would look like:

["CALLOUT_ERRNO=5", "CALLOUT_DEVICE_PATH=some path"]

Note that the metadata fields must be all uppercase.

Event Log Definition

As mentioned above, both sdbusplus and phosphor-logging must know about the event logs in their header files, or the code that uses them will not even compile. The standard way to do this to define the event in the appropriate <error-category>.errors.yaml file, and define any metadata in the <error-category>.metadata.yaml file in the appropriate *-dbus-interfaces repository. During the build, phosphor-logging generates the elog-errors.hpp file for use by the calling code.

In much the same way, sdbusplus uses the event log definitions to generate an error.hpp file that contains the specific exception. The path of the error.hpp matches the path of the YAML file.

For example, if in phosphor-dbus-interfaces there is xyz/openbmc_project/Control/Device.errors.yaml, the errors that come from that file will be in the include: xyz/openbmc_project/Control/Device/error.hpp.

In rare cases, one may want one to define their errors in the same repository that uses them. To do that, one must:

  1. Add the error and metadata YAML files to the repository.
  2. Run the sdbus++ script within the makefile to create the error.hpp and .cpp files from the local YAML, and include the error.cpp file in the application that uses it. See openpower-occ-control for an example.
  3. Tell phosphor-logging about the error. This is done by either:
    • Following the directions defined in this README, or
    • Running the script yourself:
    1. Run phosphor-logging's elog-gen.py script on the local yaml to generate an elog-errors.hpp file that just contains the local errors, and check that into the repository and include it where the errors are needed.
    2. Create a recipe that copies the local YAML files to a place that phosphor-logging can find it during the build. See here for an example.

D-Bus Event Log Creation

There is also a D-Bus method to create event logs:

  • Service: xyz.openbmc_project.Logging
  • Object Path: /xyz/openbmc_project/logging
  • Interface: xyz.openbmc_project.Logging.Create
  • Method: Create
    • Method Arguments:
      • Message: The Message string property for the xyz.openbmc_project.Logging.Entry interface.
      • Severity: The severity property for the xyz.openbmc_project.Logging.Entry interface. An xyz.openbmc_project.Logging.Entry.Level enum value.
      • AdditionalData: The AdditionalData property for the xyz.openbmc_project.Logging.Entry interface, but in a map instead of in a vector of "KEY=VALUE" strings. Example:
                     std::map<std::string, std::string> additionalData;
                     additionalData["KEY"] = "VALUE";

Unlike the previous APIs where errors could also act as exceptions that could be thrown across D-Bus, this API does not require that the error be defined in the error YAML in the D-Bus interfaces repository so that sdbusplus knows about it. Additionally, as this method passes in everything needed to create the event log, the logging daemon doesn't have to know about it ahead of time either.

That being said, it is recommended that users of this API still follow some guidelines for the message field, which is normally generated from a combination of the path to the error YAML file and the error name itself. For example, the Timeout error in xyz/openbmc_project/Common.errors.yaml will have a Message property of xyz.openbmc_project.Common.Error.Timeout.

The guidelines are:

  1. When it makes sense, one can still use an existing error that has already been defined in an error YAML file, and use the same severity and metadata (AdditionalData) as in the corresponding metadata YAML file.

  2. If creating a new error, use the same naming scheme as other errors, which starts with the domain, xyz.openbmc_project, org.open_power, etc, followed by the capitalized category values, followed by Error, followed by the capitalized error name itself, with everything separated by "."s. For example: xyz.openbmc_project.Some.Category.Error.Name.

  3. If creating a new common error, still add it to the appropriate error and metadata YAML files in the appropriate D-Bus interfaces repository so that others can know about it and use it in the future. This can be done after the fact.

Adding application specific error YAML

  • This document captures steps for adding application specific error YAML files and generating local elog-errors.hpp header file for application use.
  • Should cater for continuous integration (CI) build, bitbake image build, and local repository build.

Continuous Integration (CI) build

  • Make is called on the repository that is modified.
  • Dependent packages are pulled based on the dependency list specified in the configure.ac script.

Recipe build

  • Native recipes copy error YAML files to shared location.
  • phosphor-logging builds elog-errors.hpp by parsing the error YAML files from the shared location.

Local repository build

  • Copies local error YAML files to the shared location in SDK
  • Make generates elog-errors.hpp by parsing the error YAML files from the shared location.

Makefile changes

Reference

Export error YAML to shared location

Modify Makefile.am to export newly added error YAML to shared location

yamldir = ${datadir}/phosphor-dbus-yaml/yaml
nobase_yaml_DATA = \
    org/open_power/Host.errors.yaml
Generate elog-errors.hpp using elog parser from SDK location
  • Add a conditional check "GEN_ERRORS"
  • Disable the check for recipe bitbake image build
  • Enable it for local repository build
  • If "GEN_ERRORS" is enabled, build generates elog-errors.hpp header file.
  # Generate phosphor-logging/elog-errors.hpp
  if GEN_ERRORS
  ELOG_MAKO ?= elog-gen-template.mako.hpp
  ELOG_DIR ?= ${OECORE_NATIVE_SYSROOT}${datadir}/phosphor-logging/elog
  ELOG_GEN_DIR ?= ${ELOG_DIR}/tools/
  ELOG_MAKO_DIR ?= ${ELOG_DIR}/tools/phosphor-logging/templates/
  YAML_DIR ?= ${OECORE_NATIVE_SYSROOT}${datadir}/phosphor-dbus-yaml/yaml
  phosphor-logging/elog-errors.hpp:
      @mkdir -p ${YAML_DIR}/org/open_power/
      @cp ${top_srcdir}/org/open_power/Host.errors.yaml \
        ${YAML_DIR}/org/open_power/Host.errors.yaml
      @mkdir -p `dirname $@`
      @chmod 777 $(ELOG_GEN_DIR)/elog-gen.py
      $(AM_V_at)$(PYTHON) $(ELOG_GEN_DIR)/elog-gen.py -y ${YAML_DIR} \
        -t ${ELOG_MAKO_DIR} -m ${ELOG_MAKO} -o $@
  endif
Update BUILT_SOURCES
  • Append elog-errors.hpp to BUILT_SOURCES list and put it in conditional check GEN_ERRORS so that the elog-errors.hpp is generated only during local repository build.
    if GEN_ERRORS
    nobase_nodist_include_HEADERS += \
                phosphor-logging/elog-errors.hpp
    endif
    if GEN_ERRORS
    BUILT_SOURCES += phosphor-logging/elog-errors.hpp
    endif
Conditional check for native build
  • As the same Makefile is used both for recipe image build and native recipe build, add a conditional to ensure that only installation of error yaml files happens during native build. It is not required to build repository during native build.
   if !INSTALL_ERROR_YAML
   endif

Autotools changes

Reference

Add option(argument) to enable/disable installing error yaml file
  • Install error yaml option(argument) is enabled for native recipe build and disabled for bitbake build.

  • When install error yaml option is disabled do not check for target specific packages in autotools configure script.

Add option(argument) to install error yaml files
AC_ARG_ENABLE([install_error_yaml],
    AS_HELP_STRING([--enable-install_error_yaml],
    [Enable installing error yaml file]),[], [install_error_yaml=no])
AM_CONDITIONAL([INSTALL_ERROR_YAML],
    [test "x$enable_install_error_yaml" = "xyes"])
AS_IF([test "x$enable_install_error_yaml" != "xyes"], [
..
..
])
Add option(argument) to enable/disable generating elog-errors header file
AC_ARG_ENABLE([gen_errors],
    AS_HELP_STRING([--enable-gen_errors], [Enable elog-errors.hpp generation ]),
    [],[gen_errors=yes])
AM_CONDITIONAL([GEN_ERRORS], [test "x$enable_gen_errors" != "xno"])

Recipe changes

Reference

Extend recipe for native and nativesdk
  • Extend the recipe for native and native SDK builds
BBCLASSEXTEND += "native nativesdk"
Remove dependencies for native and native SDK build
  • Native recipe caters only for copying error yaml files to shared location.
  • For native and native SDK build remove dependency on packages that recipe build depends
Remove dependency on phosphor-logging for native build
DEPENDS_remove_class-native = "phosphor-logging"
Remove dependency on phosphor-logging for native SDK build
DEPENDS_remove_class-nativesdk = "phosphor-logging"
Add install_error_yaml argument during native build
  • Add package config to enable/disable install_error_yaml feature.
Add package config to enable/disable install_error_yaml feature
PACKAGECONFIG ??= "install_error_yaml"
PACKAGECONFIG[install_error_yaml] = " \
        --enable-install_error_yaml, \
        --disable-install_error_yaml, ,\
        "
Enable install_error_yaml check for native build
PACKAGECONFIG_add_class-native = "install_error_yaml"
PACKAGECONFIG_add_class-nativesdk = "install_error_yaml"
Disable install_error_yaml during target build
PACKAGECONFIG_remove_class-target = "install_error_yaml"
Disable generating elog-errors.hpp for bitbake build
  • Disable gen_errors argument for bitbake image build as the application uses the elog-errors.hpp generated by phosphor-logging
  • Argument is enabled by default for local repository build in the configure script of the local repository.
 XTRA_OECONF += "--disable-gen_errors"

Local build

  • During local build use --prefix=/usr for the configure script.

Reference

Event Log Extensions

The extension concept is a way to allow code that creates other formats of error logs besides phosphor-logging's event logs to still reside in the phosphor-log-manager application.

The extension code lives in the extensions/<extension> subdirectories, and is enabled with a --enable-<extension> configure flag. The extension code won't compile unless enabled with this flag.

Extensions can register themselves to have functions called at the following points using the REGISTER_EXTENSION_FUNCTION macro.

  • On startup
    • Function type void(internal::Manager&)
  • After an event log is created
    • Function type void(args)
    • The args are:
      • const std::string& - The Message property
      • uin32_t - The event log ID
      • uint64_t - The event log timestamp
      • Level - The event level
      • const AdditionalDataArg& - the additional data
      • const AssociationEndpointsArg& - Association endpoints (callouts)
  • Before an event log is deleted, to check if it is allowed.
    • Function type void(std::uint32_t, bool&) that takes the event ID
  • After an event log is deleted
    • Function type void(std::uint32_t) that takes the event ID

Using these callback points, they can create their own event log for each OpenBMC event log that is created, and delete these logs when the corresponding OpenBMC event log is deleted.

In addition, an extension has the option of disabling phosphor-logging's default error log capping policy so that it can use its own. The macro DISABLE_LOG_ENTRY_CAPS() is used for that.

Motivation

The reason for adding support for extensions inside the phosphor-log-manager daemon as opposed to just creating new daemons that listen for D-Bus signals is to allow interactions that would be complicated or expensive if just done over D-Bus, such as:

  • Allowing for custom old log retention algorithms.
  • Prohibiting manual deleting of certain logs based on an extension's requirements.

Creating extensions

  1. Add a new flag to configure.ac to enable the extension:
AC_ARG_ENABLE([foo-extension],
              AS_HELP_STRING([--enable-foo-extension],
                             [Create Foo logs]))
AM_CONDITIONAL([ENABLE_FOO_EXTENSION],
               [test "x$enable_foo_extension" == "xyes"])
  1. Add the code in extensions/<extension>/.
  2. Create a makefile include to add the new code to phosphor-log-manager:
phosphor_log_manager_SOURCES += \
        extensions/foo/foo.cpp
  1. In extensions/extensions.mk, add the makefile include:
if ENABLE_FOO_EXTENSION
include extensions/foo/foo.mk
endif
  1. In the extension code, register the functions to call and optionally disable log capping using the provided macros:
DISABLE_LOG_ENTRY_CAPS();

void fooStartup(internal::Manager& manager)
{
    // Initialize
}

REGISTER_EXTENSION_FUNCTION(fooStartup);

void fooCreate(const std::string& message, uint32_t id, uint64_t timestamp,
               Entry::Level severity, const AdditionalDataArg& additionalData,
               const AssociationEndpointsArg& assocs)
{
    // Create a different type of error log based on 'entry'.
}

REGISTER_EXTENSION_FUNCTION(fooCreate);

void fooRemove(uint32_t id)
{
    // Delete the extension error log that corresponds to 'id'.
}

REGISTER_EXTENSION_FUNCTION(fooRemove);

Extension List

The supported extensions are:

  • OpenPower PELs
    • Enabled with --enable-openpower-pel-extension
    • Detailed information can be found here

Remote Logging via Rsyslog

The BMC has the ability to stream out local logs (that go to the systemd journal) via rsyslog (https://www.rsyslog.com/).

The BMC will send everything. Any kind of filtering and appropriate storage will have to be managed on the rsyslog server. Various examples are available on the internet. Here are few pointers : https://www.rsyslog.com/storing-and-forwarding-remote-messages/ https://www.rsyslog.com/doc/rsyslog%255Fconf%255Ffilter.html https://www.thegeekdiary.com/understanding-rsyslog-filter-options/

Configuring rsyslog server for remote logging

The BMC is an rsyslog client. To stream out logs, it needs to talk to an rsyslog server, to which there's connectivity over a network. REST API can be used to set the remote server's IP address and port number.

The following presumes a user has logged on to the BMC (see https://github.com/openbmc/docs/blob/master/rest-api.md).

Set the IP:

curl -b cjar -k -H "Content-Type: application/json" -X PUT \
    -d '{"data": <IP address>}' \
    https://<BMC IP address>/xyz/openbmc_project/logging/config/remote/attr/Address

Set the port:

curl -b cjar -k -H "Content-Type: application/json" -X PUT \
    -d '{"data": <port number>}' \
    https://<BMC IP address>/xyz/openbmc_project/logging/config/remote/attr/Port

Querying the current configuration

curl -b cjar -k \
    https://<BMC IP address>/xyz/openbmc_project/logging/config/remote

Setting the hostname

Rsyslog can store logs separately for each host. For this reason, it's useful to provide a unique hostname to each managed BMC. Here's how that can be done via a REST API :

curl -b cjar -k -H "Content-Type: application/json" -X PUT \
    -d '{"data": "myHostName"}' \
    https://<BMC IP address>//xyz/openbmc_project/network/config/attr/HostName

Disabling remote logging

Remote logging can be disabled by writing 0 to the port, or an empty string("") to the IP.

Changing the rsyslog server

When switching to a new server from an existing one (i.e the address, or port, or both change), it is recommended to disable the existing configuration first.

Boot Fail on Hardware Errors

phosphor-logging supports a setting, which when set, will result in the software looking at new phosphor-logging entries being created, and if a CALLOUT* is found within the entry, ensuring the system will not power on. Entries with severities of Informational or Debug will not block boots, even if they have callouts.

The full design for this can be found here

To enable this function:

busctl set-property xyz.openbmc_project.Settings /xyz/openbmc_project/logging/settings xyz.openbmc_project.Logging.Settings QuiesceOnHwError b true

To check if an entry is blocking the boot:

obmcutil listbootblock

Resolve or clear the corresponding entry to allow the system to boot.