{
    "PELs":
    [
        {
            "Name": "xyz.openbmc_project.Common.Error.Timeout",
            "Subsystem": "bmc_firmware",

            "SRC":
            {
                "ReasonCode": "0x1001",
                "Words6To9":
                {
                    "6":
                    {
                        "Description": "Timeout in ms",
                        "AdditionalDataPropSource": "TIMEOUT_IN_MSEC"
                    }
                }
            },

            "Documentation":
            {
                "Description": "This is a generic timeout error",
                "Message": "An operation timed out",
                "Notes": [
                    "The journal should contain more information"
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Common.Error.InternalFailure",
            "Subsystem": "bmc_firmware",

            "SRC":
            {
                "ReasonCode": "0x1002",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "BMC code had a generic internal failure",
                "Message": "An application had an internal failure",
                "Notes": [
                    "The journal should contain more information"
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Common.Error.InvalidArgument",
            "Subsystem": "user_error",

            "SRC":
            {
                "ReasonCode": "0x1003",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "BMC code was given an invalid argument",
                "Message": "Code was given an invalid argument",
                "Notes": [
                    "The journal should contain more information"
                ]
            }
        },
        {
            "Name": "xyz.openbmc_project.Common.Error.InsufficientPermission",
            "Subsystem": "user_error",

            "SRC":
            {
                "ReasonCode": "0x1004",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "An operation failed due to insufficient permission",
                "Message": "An operation failed due to unsufficient permission",
                "Notes": [
                    "The journal should contain more information"
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Common.Error.NotAllowed",
            "Subsystem": "user_error",

            "SRC":
            {
                "ReasonCode": "0x1005",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "An operation failed because it isn't allowed",
                "Message": "An operation failed becuase it isn't allowed",
                "Notes": [
                    "The journal should contain more information"
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Common.Error.NoCACertificate",
            "Subsystem": "user_error",

            "SRC":
            {
                "ReasonCode": "0x1006",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "The server's CA certificate has not been provided",
                "Message": "The server's CA certificate has not been provided"
            }
        },

        {
            "Name": "org.open_power.Logging.Error.SentBadPELToHost",
            "Subsystem": "bmc_firmware",
            "Severity": "non_error",

            "SRC":
            {
                "ReasonCode": "0x2001",
                "Words6To9":
                {
                    "6":
                    {
                        "Description": "The bad PEL ID",
                        "AdditionalDataPropSource": "BAD_ID"
                    }
                }
            },

            "Documentation":
            {
                "Description": "The BMC sent the host a malformed PEL",
                "Message": "The BMC sent the host a malformed PEL",
                "Notes": [
                    "The host firmware rejected that PEL."
                ]
            }
        },

        {
            "Name": "org.open_power.Logging.Error.BadHostPEL",
            "Subsystem": "platform_firmware",
            "Severity": "unrecoverable",

            "SRC":
            {
                "ReasonCode": "0x2002",
                "Words6To9":
                {
                    "6":
                    {
                        "Description": "The PLID of the invalid PEL",
                        "AdditionalDataPropSource": "PLID"
                    },
                    "7":
                    {
                        "Description": "The corresponding OpenBMC event log ID",
                        "AdditionalDataPropSource": "OBMC_LOG_ID"
                    },
                    "8":
                    {
                        "Description": "The size of the invalid PEL",
                        "AdditionalDataPropSource": "PEL_SIZE"
                    }
                }
            },

            "Documentation":
            {
                "Description": "The host sent the BMC an invalid PEL",
                "Message": "The host sent the BMC an invalid PEL",
                "Notes": [
                ]
            }
        },

        {
            "Name": "org.open_power.PHAL.Error.Boot",
            "Subsystem": "cec_hardware",
            "Severity": "unrecoverable",

            "SRC":
            {
                "ReasonCode": "0x3000",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "Failure occured during boot process",
                "Message": "Failure occured during boot process",
                "Notes": [
                    "Debug traces will be captured in AdditionalData section"
                ]
            }
        },

        {
            "Name": "org.open_power.Attn.Error.Terminate",
            "Subsystem": "other_na",
            "Severity": "critical_system_term",

            "SRC":
            {
                "ReasonCode": "0xD138",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "Status shows TI special attention active",
                "Message": "TI special attention detected",
                "Notes": [
                    "This entry is for any TI special attention event ",
                    "reported by the attention handler component"
                ]
            }
        },

        {
            "Name": "org.open_power.Attn.Error.Fail",
            "Subsystem": "bmc_firmware",
            "Severity": "unrecoverable_loss_of_function",

            "SRC":
            {
                "ReasonCode": "0xD13E",
                "Words6To9":
                {
                    "6":
                    {
                        "Description": "Error code from attention handler",
                        "AdditionalDataPropSource": "ERROR_CODE"
                    }
                }
            },
            "Documentation":
            {
                "Description": "The attention handler encountered an error",
                "MessageArgSources" : ["SRCWord6"],
                "Message": "Attention handler error %1",
                "Notes": [
                    "Attention handler will provide error code"
                ]
            }
        },

        {
            "Name": "org.open_power.Attn.Error.Vital",
            "Subsystem": "processor_chip",
            "Severity": "critical",

            "SRC":
            {
                "ReasonCode": "0xD16D",
                "Words6To9":
                {
                }
            },

            "Documentation":
            {
                "Description": "Status shows SBE vital attention active",
                "Message": "SBE vital attention detected",
                "Notes": [
                    "This entry is for any SBE vital attention event ",
                    "reported by the attention handler component"
                ]
            }
        },

        {
            "Name": "org.open_power.HwDiags.Error.Checkstop",
            "Subsystem": "cec_hardware",
            "Severity": "critical",

            "SRC":
            {
                "ReasonCode": "0xE504",
                "Words6To9":
                {
                    "6":
                    {
                        "Description": "Chip ID",
                        "AdditionalDataPropSource": "CHIP_ID"
                    },
                    "8":
                    {
                        "Description": "Error Signature",
                        "AdditionalDataPropSource": "SIGNATURE"
                    }
                }
            },

            "Documentation":
            {
                "Description": "A checkstop condition has been detected",
                "MessageArgSources" : ["SRCWord6", "SRCWord8"],
                "Message": "Checkstop: Chip %1, Signature %2",
                "Notes": [
                    "This entry is for any checkstop event reported by ",
                    "the hardware diagnostics component."
                ]
            }
        },

        {
            "Name": "org.open_power.HwDiags.Error.Fail",
            "Subsystem": "bmc_firmware",
            "Severity": "diagnostic_error",

            "SRC":
            {
                "ReasonCode": "0xE580",
                "Words6To9":
                {
                    "6":
                    {
                        "Description": "Error code from hardware diagnostics",
                        "AdditionalDataPropSource": "ERROR_CODE"
                    }
                }
            },
            "Documentation":
            {
                "Description": "Hardware diagnostics encountered an error",
                "MessageArgSources" : ["SRCWord6"],
                "Message": "Hardware diagnostics error %1",
                "Notes": [
                    "Hardware diagnostics will provide error code"
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Power.Regulators.Error.WriteVerification",
            "Subsystem": "power",
            "ComponentID": "0x2700",

            "SRC": {
                "Type": "11",
                "ReasonCode": "0x2900",
                "Words6To9": {}
            },

            "Documentation": {
                "Description": "A write verification error occurred on a device",
                "Message": "A write verification error occurred on a device",
                "Notes": [
                    "This error occurs when a device register is written, ",
                    "read back, and the two values do not match.  This is ",
                    "also called a read-back error.  The device should be ",
                    "identified using the CALLOUT_DEVICE_PATH or ",
                    "CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR keywords in the ",
                    "AdditionalData property of the event log.  This will ",
                    "cause the device and the hardware in the communication ",
                    "path to be called out."
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile",
            "Subsystem": "power",
            "ComponentID": "0x2700",

            "SRC": {
                "Type": "11",
                "ReasonCode": "0xA013",
                "Words6To9": {}
            },

            "Callouts": [
                {
                    "CalloutList": [
                        { "Priority": "high", "Procedure": "bmc_code" }
                    ]
                }
            ],

            "Documentation": {
                "Description": "A regulators configuration file error occurred",
                "Message": "A regulators configuration file error occurred",
                "Notes": [
                    "The regulators configuration file could not be found, ",
                    "could not be read, or had invalid contents."
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Power.Error.Internal",
            "Subsystem": "power",
            "ComponentID": "0x2700",

            "SRC": {
                "Type": "11",
                "ReasonCode": "0xE000",
                "Words6To9": {}
            },

            "Callouts": [
                {
                    "CalloutList": [
                        { "Priority": "high", "Procedure": "bmc_code" }
                    ]
                }
            ],

            "Documentation": {
                "Description": "An internal firmware error occurred",
                "Message": "An internal firmware error occurred",
                "Notes": [
                    "The error details must be provided in the AdditionalData ",
                    "property of the event log."
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Power.Error.I2C",
            "Subsystem": "cec_i2c",
            "ComponentID": "0x2700",

            "SRC": {
                "Type": "11",
                "ReasonCode": "0xE100",
                "Words6To9": {}
            },

            "Documentation": {
                "Description": "An I2C error occurred communicating with a device",
                "Message": "An I2C error occurred communicating with a device",
                "Notes": [
                    "The device should be identified using the ",
                    "CALLOUT_DEVICE_PATH or CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR ",
                    "keywords in the AdditionalData property of the event ",
                    "log.  This will cause the device and the hardware in the ",
                    "communication path to be called out."
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Power.Error.PMBus",
            "Subsystem": "power",
            "ComponentID": "0x2700",

            "SRC": {
                "Type": "11",
                "ReasonCode": "0xE200",
                "Words6To9": {}
            },

            "Documentation": {
                "Description": "A PMBus error occurred on a device",
                "Message": "A PMBus error occurred on a device",
                "Notes": [
                    "This error occurs when the I2C communication was ",
                    "successful, but the PMBus value read is invalid or ",
                    "unsupported.  CALLOUT_INVENTORY_PATH should be specified ",
                    "in the AdditionalData property of the event log so that ",
                    "the device is called out but not the communication path."
                ]
            }
        },

        {
            "Name": "xyz.openbmc_project.Power.Error.DBus",
            "Subsystem": "power",
            "ComponentID": "0x2700",

            "SRC": {
                "Type": "11",
                "ReasonCode": "0xE300",
                "Words6To9": {}
            },

            "Callouts": [
                {
                    "CalloutList": [
                        { "Priority": "high", "Procedure": "bmc_code" }
                    ]
                }
            ],

            "Documentation": {
                "Description": "A firmware inter-process communication (D-Bus) error occurred",
                "Message": "A firmware inter-process communication (D-Bus) error occurred"
            }
        }
    ]
}