Matt Spinler | 44792fd | 2019-09-26 15:58:58 -0500 | [diff] [blame] | 1 | { |
| 2 | "PELs": |
| 3 | [ |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 4 | { |
| 5 | "Name": "xyz.openbmc_project.Common.Error.Timeout", |
| 6 | "Subsystem": "bmc_firmware", |
Matt Spinler | 44792fd | 2019-09-26 15:58:58 -0500 | [diff] [blame] | 7 | |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 8 | "SRC": |
| 9 | { |
| 10 | "ReasonCode": "0x1001", |
| 11 | "Words6To9": |
| 12 | { |
| 13 | "6": |
| 14 | { |
| 15 | "Description": "Timeout in ms", |
| 16 | "AdditionalDataPropSource": "TIMEOUT_IN_MSEC" |
| 17 | } |
| 18 | } |
| 19 | }, |
| 20 | |
| 21 | "Documentation": |
| 22 | { |
| 23 | "Description": "This is a generic timeout error", |
| 24 | "Message": "An operation timed out", |
| 25 | "Notes": [ |
| 26 | "The journal should contain more information" |
| 27 | ] |
| 28 | } |
| 29 | }, |
| 30 | |
| 31 | { |
| 32 | "Name": "xyz.openbmc_project.Common.Error.InternalFailure", |
| 33 | "Subsystem": "bmc_firmware", |
| 34 | |
| 35 | "SRC": |
| 36 | { |
| 37 | "ReasonCode": "0x1002", |
| 38 | "Words6To9": |
| 39 | { |
| 40 | } |
| 41 | }, |
| 42 | |
| 43 | "Documentation": |
| 44 | { |
| 45 | "Description": "BMC code had a generic internal failure", |
| 46 | "Message": "An application had an internal failure", |
| 47 | "Notes": [ |
| 48 | "The journal should contain more information" |
| 49 | ] |
| 50 | } |
| 51 | }, |
| 52 | |
| 53 | { |
| 54 | "Name": "xyz.openbmc_project.Common.Error.InvalidArgument", |
| 55 | "Subsystem": "user_error", |
| 56 | |
| 57 | "SRC": |
| 58 | { |
| 59 | "ReasonCode": "0x1003", |
| 60 | "Words6To9": |
| 61 | { |
| 62 | } |
| 63 | }, |
| 64 | |
| 65 | "Documentation": |
| 66 | { |
| 67 | "Description": "BMC code was given an invalid argument", |
| 68 | "Message": "Code was given an invalid argument", |
| 69 | "Notes": [ |
| 70 | "The journal should contain more information" |
| 71 | ] |
| 72 | } |
| 73 | }, |
| 74 | { |
| 75 | "Name": "xyz.openbmc_project.Common.Error.InsufficientPermission", |
| 76 | "Subsystem": "user_error", |
| 77 | |
| 78 | "SRC": |
| 79 | { |
| 80 | "ReasonCode": "0x1004", |
| 81 | "Words6To9": |
| 82 | { |
| 83 | } |
| 84 | }, |
| 85 | |
| 86 | "Documentation": |
| 87 | { |
| 88 | "Description": "An operation failed due to insufficient permission", |
| 89 | "Message": "An operation failed due to unsufficient permission", |
| 90 | "Notes": [ |
| 91 | "The journal should contain more information" |
| 92 | ] |
| 93 | } |
| 94 | }, |
| 95 | |
| 96 | { |
| 97 | "Name": "xyz.openbmc_project.Common.Error.NotAllowed", |
| 98 | "Subsystem": "user_error", |
| 99 | |
| 100 | "SRC": |
| 101 | { |
| 102 | "ReasonCode": "0x1005", |
| 103 | "Words6To9": |
| 104 | { |
| 105 | } |
| 106 | }, |
| 107 | |
| 108 | "Documentation": |
| 109 | { |
| 110 | "Description": "An operation failed because it isn't allowed", |
Matt Spinler | 2695876 | 2020-08-27 13:21:23 -0500 | [diff] [blame] | 111 | "Message": "An operation failed because it isn't allowed", |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 112 | "Notes": [ |
| 113 | "The journal should contain more information" |
| 114 | ] |
| 115 | } |
| 116 | }, |
| 117 | |
| 118 | { |
| 119 | "Name": "xyz.openbmc_project.Common.Error.NoCACertificate", |
| 120 | "Subsystem": "user_error", |
| 121 | |
| 122 | "SRC": |
| 123 | { |
| 124 | "ReasonCode": "0x1006", |
| 125 | "Words6To9": |
| 126 | { |
| 127 | } |
| 128 | }, |
| 129 | |
| 130 | "Documentation": |
| 131 | { |
| 132 | "Description": "The server's CA certificate has not been provided", |
| 133 | "Message": "The server's CA certificate has not been provided" |
| 134 | } |
Matt Spinler | 05c2c6c | 2019-12-18 14:02:09 -0600 | [diff] [blame] | 135 | }, |
| 136 | |
| 137 | { |
Matt Spinler | af036b1 | 2020-06-25 10:53:52 -0500 | [diff] [blame] | 138 | "Name": "xyz.openbmc_project.Sensor.Device.Error.ReadFailure", |
| 139 | "Subsystem": "cec_chip_iface", |
| 140 | |
| 141 | "SRC": |
| 142 | { |
| 143 | "ReasonCode": "0x1007", |
| 144 | "Words6To9": |
| 145 | { |
| 146 | "6": |
| 147 | { |
| 148 | "Description": "errno of the failure", |
| 149 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 150 | } |
| 151 | } |
| 152 | }, |
| 153 | |
| 154 | "Documentation": |
| 155 | { |
| 156 | "Description": "Sensor device read failure", |
| 157 | "Message": "There was a failure when reading a sensor device", |
| 158 | "Notes": [ |
| 159 | "The severity is set by the creator.", |
| 160 | "The action flags are set automatically by the code.", |
| 161 | "Callouts added based on CALLOUT_DEVICE_PATH." |
| 162 | ] |
| 163 | } |
| 164 | }, |
| 165 | |
| 166 | { |
| 167 | "Name": "xyz.openbmc_project.Common.Device.Error.ReadFailure", |
| 168 | "Subsystem": "cec_chip_iface", |
| 169 | |
| 170 | "SRC": |
| 171 | { |
| 172 | "ReasonCode": "0x1008", |
| 173 | "Words6To9": |
| 174 | { |
| 175 | "6": |
| 176 | { |
| 177 | "Description": "errno of the failure", |
| 178 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 179 | } |
| 180 | } |
| 181 | }, |
| 182 | |
| 183 | "Documentation": |
| 184 | { |
| 185 | "Description": "Device read failure", |
| 186 | "Message": "There was a failure when reading a hardware device", |
| 187 | "Notes": [ |
| 188 | "The severity is set by the creator.", |
| 189 | "The action flags are set automatically by the code.", |
| 190 | "Callouts added based on CALLOUT_DEVICE_PATH." |
| 191 | ] |
| 192 | } |
| 193 | }, |
| 194 | |
| 195 | { |
| 196 | "Name": "xyz.openbmc_project.Control.Device.Error.WriteFailure", |
| 197 | "Subsystem": "cec_chip_iface", |
| 198 | |
| 199 | "SRC": |
| 200 | { |
| 201 | "ReasonCode": "0x1009", |
| 202 | "Words6To9": |
| 203 | { |
| 204 | "6": |
| 205 | { |
| 206 | "Description": "errno of the failure", |
| 207 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 208 | } |
| 209 | } |
| 210 | }, |
| 211 | |
| 212 | "Documentation": |
| 213 | { |
| 214 | "Description": "Device write failure", |
| 215 | "Message": "There was a failure when writing to a hardware device", |
| 216 | "Notes": [ |
| 217 | "The severity is set by the creator.", |
| 218 | "The action flags are set automatically by the code.", |
| 219 | "Callouts added based on CALLOUT_DEVICE_PATH" |
| 220 | ] |
| 221 | } |
| 222 | }, |
| 223 | |
| 224 | { |
| 225 | "Name": "xyz.openbmc_project.Common.Device.Error.WriteFailure", |
| 226 | "Subsystem": "cec_chip_iface", |
| 227 | |
| 228 | "SRC": |
| 229 | { |
| 230 | "ReasonCode": "0x100A", |
| 231 | "Words6To9": |
| 232 | { |
| 233 | "6": |
| 234 | { |
| 235 | "Description": "errno of the failure", |
| 236 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 237 | } |
| 238 | } |
| 239 | }, |
| 240 | |
| 241 | "Documentation": |
| 242 | { |
| 243 | "Description": "Device write failure", |
| 244 | "Message": "There was a failure when writing to a hardware device", |
| 245 | "Notes": [ |
| 246 | "The severity is set by the creator.", |
| 247 | "The action flags are set automatically by the code.", |
| 248 | "Callouts added based on CALLOUT_DEVICE_PATH" |
| 249 | ] |
| 250 | } |
| 251 | }, |
Jayanth Othayoth | bd0a752 | 2021-05-03 02:05:36 -0500 | [diff] [blame] | 252 | |
Matt Spinler | af036b1 | 2020-06-25 10:53:52 -0500 | [diff] [blame] | 253 | { |
Matt Spinler | 05c2c6c | 2019-12-18 14:02:09 -0600 | [diff] [blame] | 254 | "Name": "org.open_power.Logging.Error.SentBadPELToHost", |
| 255 | "Subsystem": "bmc_firmware", |
| 256 | "Severity": "non_error", |
| 257 | |
| 258 | "SRC": |
| 259 | { |
| 260 | "ReasonCode": "0x2001", |
| 261 | "Words6To9": |
| 262 | { |
| 263 | "6": |
| 264 | { |
| 265 | "Description": "The bad PEL ID", |
| 266 | "AdditionalDataPropSource": "BAD_ID" |
| 267 | } |
| 268 | } |
| 269 | }, |
| 270 | |
| 271 | "Documentation": |
| 272 | { |
| 273 | "Description": "The BMC sent the host a malformed PEL", |
| 274 | "Message": "The BMC sent the host a malformed PEL", |
| 275 | "Notes": [ |
| 276 | "The host firmware rejected that PEL." |
| 277 | ] |
| 278 | } |
Matt Spinler | e95fd01 | 2020-01-07 12:53:16 -0600 | [diff] [blame] | 279 | }, |
| 280 | |
| 281 | { |
| 282 | "Name": "org.open_power.Logging.Error.BadHostPEL", |
| 283 | "Subsystem": "platform_firmware", |
| 284 | "Severity": "unrecoverable", |
| 285 | |
| 286 | "SRC": |
| 287 | { |
| 288 | "ReasonCode": "0x2002", |
| 289 | "Words6To9": |
| 290 | { |
| 291 | "6": |
| 292 | { |
| 293 | "Description": "The PLID of the invalid PEL", |
| 294 | "AdditionalDataPropSource": "PLID" |
| 295 | }, |
| 296 | "7": |
| 297 | { |
| 298 | "Description": "The corresponding OpenBMC event log ID", |
| 299 | "AdditionalDataPropSource": "OBMC_LOG_ID" |
| 300 | }, |
| 301 | "8": |
| 302 | { |
| 303 | "Description": "The size of the invalid PEL", |
| 304 | "AdditionalDataPropSource": "PEL_SIZE" |
| 305 | } |
| 306 | } |
| 307 | }, |
| 308 | |
| 309 | "Documentation": |
| 310 | { |
| 311 | "Description": "The host sent the BMC an invalid PEL", |
| 312 | "Message": "The host sent the BMC an invalid PEL", |
| 313 | "Notes": [ |
| 314 | ] |
| 315 | } |
Marri Devender Rao | ead1be2 | 2020-03-28 05:50:59 -0500 | [diff] [blame] | 316 | }, |
| 317 | |
| 318 | { |
Matt Spinler | 3477ce9 | 2020-07-08 14:49:25 -0500 | [diff] [blame] | 319 | "Name": "org.open_power.Logging.Error.TestError1", |
| 320 | "Subsystem": "platform_firmware", |
| 321 | "Severity": "unrecoverable", |
| 322 | |
| 323 | "SRC": |
| 324 | { |
| 325 | "ReasonCode": "0x2003", |
| 326 | "Words6To9": |
| 327 | { |
| 328 | } |
| 329 | }, |
| 330 | |
| 331 | "Callouts": [ |
| 332 | { |
| 333 | "CalloutList": [ |
| 334 | {"Priority": "high", "Procedure": "bmc_code"}, |
| 335 | {"Priority": "medium", "SymbolicFRU": "service_docs"} |
| 336 | ] |
| 337 | } |
| 338 | ], |
| 339 | |
| 340 | "Documentation": |
| 341 | { |
| 342 | "Description": "An error for testing", |
| 343 | "Message": "This is a test error" |
| 344 | } |
| 345 | }, |
| 346 | |
| 347 | { |
Matt Spinler | 30ddc9f | 2020-07-16 15:39:59 -0500 | [diff] [blame] | 348 | "Name": "xyz.openbmc_project.Logging.Error.Default", |
| 349 | "Subsystem": "other_na", |
| 350 | |
| 351 | "SRC": |
| 352 | { |
| 353 | "ReasonCode": "0x2004", |
| 354 | "Words6To9": |
| 355 | { |
| 356 | } |
| 357 | }, |
| 358 | |
| 359 | "Documentation": |
| 360 | { |
| 361 | "Description": "This entry is used when no other matching entry is found", |
| 362 | "Message": "Unknown (Original event not in message registry)", |
| 363 | "Notes": [ |
| 364 | "This is used when the actual error name isn't found in ", |
| 365 | "the registry. The original error name will be stored ", |
| 366 | "in the UserData section that contains the AdditionalData ", |
| 367 | "properties using the key ERROR_NAME.", |
| 368 | "This error may contain callouts if the creator passed ", |
| 369 | "them in.", |
| 370 | "The severity is set by the creator.", |
| 371 | "If this error is seen, then a code change needs to be ", |
| 372 | "made to add the missing error entry to this registry." |
| 373 | ] |
| 374 | } |
| 375 | }, |
| 376 | |
| 377 | { |
Marri Devender Rao | ead1be2 | 2020-03-28 05:50:59 -0500 | [diff] [blame] | 378 | "Name": "org.open_power.PHAL.Error.Boot", |
| 379 | "Subsystem": "cec_hardware", |
| 380 | "Severity": "unrecoverable", |
| 381 | |
| 382 | "SRC": |
| 383 | { |
| 384 | "ReasonCode": "0x3000", |
| 385 | "Words6To9": |
| 386 | { |
| 387 | } |
| 388 | }, |
| 389 | |
| 390 | "Documentation": |
| 391 | { |
| 392 | "Description": "Failure occured during boot process", |
| 393 | "Message": "Failure occured during boot process", |
| 394 | "Notes": [ |
| 395 | "Debug traces will be captured in AdditionalData section" |
| 396 | ] |
| 397 | } |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 398 | }, |
| 399 | |
| 400 | { |
Jayanth Othayoth | bd0a752 | 2021-05-03 02:05:36 -0500 | [diff] [blame] | 401 | "Name": "org.open_power.Processor.Error.SbeChipOpFailure", |
| 402 | "Subsystem": "processor_chip", |
| 403 | "ComponentID": "0x3500", |
| 404 | |
| 405 | "SRC": |
| 406 | { |
| 407 | "ReasonCode": "0x3500", |
| 408 | "Words6To9": |
| 409 | { |
| 410 | "6": |
| 411 | { |
| 412 | "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", |
| 413 | "AdditionalDataPropSource": "SRC6" |
| 414 | } |
| 415 | } |
| 416 | }, |
| 417 | |
| 418 | "Documentation": |
| 419 | { |
| 420 | "Description": "chipop failure with SBE provided FFDC", |
| 421 | "Message": "chipop request failure reported by SBE", |
| 422 | "Notes": [ |
| 423 | "The severity is set by the creator.", |
| 424 | "Callouts added based on SBE provided FFDC.", |
| 425 | "SBE provided additional debug data included as part of the", |
| 426 | "additional user data section." |
| 427 | ] |
| 428 | } |
| 429 | }, |
| 430 | |
| 431 | { |
Jayanth Othayoth | 4f6b763 | 2021-05-03 02:36:18 -0500 | [diff] [blame] | 432 | "Name": "org.open_power.Processor.Error.SbeChipOpTimeout", |
| 433 | "Subsystem": "processor_chip", |
| 434 | "ComponentID": "0x3500", |
| 435 | |
| 436 | "SRC": |
| 437 | { |
| 438 | "ReasonCode": "0x3501", |
| 439 | "Words6To9": |
| 440 | { |
| 441 | "6": |
| 442 | { |
| 443 | "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", |
| 444 | "AdditionalDataPropSource": "SRC6" |
| 445 | } |
| 446 | } |
| 447 | }, |
| 448 | |
| 449 | "Documentation": |
| 450 | { |
| 451 | "Description": "SBE chipop timeout", |
| 452 | "Message": "chipop timeout reported during SBE communication", |
| 453 | "Notes": [ |
| 454 | "The severity is set by the creator.", |
| 455 | "Check SBE Dump associated to this error to debug the failure." |
| 456 | ] |
| 457 | } |
| 458 | }, |
| 459 | |
| 460 | { |
Jayanth Othayoth | 6c60183 | 2021-05-03 02:56:04 -0500 | [diff] [blame^] | 461 | "Name": "org.open_power.Processor.Error.SbeChipOpInvalidState", |
| 462 | "Subsystem": "processor_chip", |
| 463 | "ComponentID": "0x3500", |
| 464 | |
| 465 | "SRC": |
| 466 | { |
| 467 | "ReasonCode": "0x3502", |
| 468 | "Words6To9": |
| 469 | { |
| 470 | "6": |
| 471 | { |
| 472 | "Description": "[0:15] chip position, [16:23] command class, [24:31] command type", |
| 473 | "AdditionalDataPropSource": "SRC6" |
| 474 | }, |
| 475 | "7": |
| 476 | { |
| 477 | "Description": "Value of SBE state", |
| 478 | "AdditionalDataPropSource": "SRC7" |
| 479 | } |
| 480 | } |
| 481 | }, |
| 482 | |
| 483 | "Documentation": |
| 484 | { |
| 485 | "Description": "The SBE on this processor is not in a state where chipOps can be issued", |
| 486 | "Message": "SBE Chipop is not allowed due to invalid SBE state ", |
| 487 | "Notes": [ |
| 488 | "The severity is set by the creator." |
| 489 | ] |
| 490 | } |
| 491 | }, |
| 492 | |
| 493 | { |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 494 | "Name": "org.open_power.Attn.Error.Terminate", |
| 495 | "Subsystem": "other_na", |
| 496 | "Severity": "critical_system_term", |
| 497 | |
| 498 | "SRC": |
| 499 | { |
| 500 | "ReasonCode": "0xD138", |
| 501 | "Words6To9": |
| 502 | { |
| 503 | } |
| 504 | }, |
| 505 | |
| 506 | "Documentation": |
| 507 | { |
| 508 | "Description": "Status shows TI special attention active", |
| 509 | "Message": "TI special attention detected", |
| 510 | "Notes": [ |
| 511 | "This entry is for any TI special attention event ", |
| 512 | "reported by the attention handler component" |
| 513 | ] |
| 514 | } |
| 515 | }, |
| 516 | |
| 517 | { |
| 518 | "Name": "org.open_power.Attn.Error.Fail", |
| 519 | "Subsystem": "bmc_firmware", |
| 520 | "Severity": "unrecoverable_loss_of_function", |
| 521 | |
| 522 | "SRC": |
| 523 | { |
| 524 | "ReasonCode": "0xD13E", |
| 525 | "Words6To9": |
| 526 | { |
| 527 | "6": |
| 528 | { |
| 529 | "Description": "Error code from attention handler", |
| 530 | "AdditionalDataPropSource": "ERROR_CODE" |
| 531 | } |
| 532 | } |
| 533 | }, |
| 534 | "Documentation": |
| 535 | { |
| 536 | "Description": "The attention handler encountered an error", |
| 537 | "MessageArgSources" : ["SRCWord6"], |
| 538 | "Message": "Attention handler error %1", |
| 539 | "Notes": [ |
| 540 | "Attention handler will provide error code" |
| 541 | ] |
| 542 | } |
| 543 | }, |
| 544 | |
| 545 | { |
| 546 | "Name": "org.open_power.Attn.Error.Vital", |
| 547 | "Subsystem": "processor_chip", |
| 548 | "Severity": "critical", |
| 549 | |
| 550 | "SRC": |
| 551 | { |
| 552 | "ReasonCode": "0xD16D", |
| 553 | "Words6To9": |
| 554 | { |
| 555 | } |
| 556 | }, |
| 557 | |
| 558 | "Documentation": |
| 559 | { |
| 560 | "Description": "Status shows SBE vital attention active", |
| 561 | "Message": "SBE vital attention detected", |
| 562 | "Notes": [ |
| 563 | "This entry is for any SBE vital attention event ", |
| 564 | "reported by the attention handler component" |
| 565 | ] |
| 566 | } |
| 567 | }, |
| 568 | |
| 569 | { |
| 570 | "Name": "org.open_power.HwDiags.Error.Checkstop", |
| 571 | "Subsystem": "cec_hardware", |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 572 | "ActionFlags": [ "service_action", "report", "call_home" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 573 | |
| 574 | "SRC": |
| 575 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 576 | "ReasonCode": "0xE510", |
| 577 | "SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 578 | "Words6To9": |
| 579 | { |
| 580 | "6": |
| 581 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 582 | "Description": "[0:15] chip model, [16:23] reserved, [24:31] chip EC level", |
| 583 | "AdditionalDataPropSource": "SRC6" |
| 584 | }, |
| 585 | "7": |
| 586 | { |
| 587 | "Description": "[0:15] chip position, [16:23] unused, [24:31] signature attn type", |
| 588 | "AdditionalDataPropSource": "SRC7" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 589 | }, |
| 590 | "8": |
| 591 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 592 | "Description": "[0:15] signature ID, [16:23] signature instance, [24:31] signature bit position", |
| 593 | "AdditionalDataPropSource": "SRC8" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 594 | } |
| 595 | } |
| 596 | }, |
| 597 | |
| 598 | "Documentation": |
| 599 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 600 | "Description": "A system checkstop attention has occurred", |
| 601 | "MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
| 602 | "Message": "hw-diags signature: %1 %2 %3" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 603 | } |
| 604 | }, |
| 605 | |
| 606 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 607 | "Name": "org.open_power.HwDiags.Error.Predictive", |
| 608 | "Subsystem": "cec_hardware", |
| 609 | "ActionFlags": [ "service_action", "report", "call_home" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 610 | |
| 611 | "SRC": |
| 612 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 613 | "ReasonCode": "0xE511", |
| 614 | "SymptomIDFields": [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 615 | "Words6To9": |
| 616 | { |
| 617 | "6": |
| 618 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 619 | "Description": "[0:15] chip model, [16:23] reserved, [24:31] chip EC level", |
| 620 | "AdditionalDataPropSource": "SRC6" |
| 621 | }, |
| 622 | "7": |
| 623 | { |
| 624 | "Description": "[0:15] chip position, [16:23] unused, [24:31] signature attn type", |
| 625 | "AdditionalDataPropSource": "SRC7" |
| 626 | }, |
| 627 | "8": |
| 628 | { |
| 629 | "Description": "[0:15] signature ID, [16:23] signature instance, [24:31] signature bit position", |
| 630 | "AdditionalDataPropSource": "SRC8" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 631 | } |
| 632 | } |
| 633 | }, |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 634 | |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 635 | "Documentation": |
| 636 | { |
Zane Shelley | 561c038 | 2020-11-17 13:20:05 -0600 | [diff] [blame] | 637 | "Description": "A hardware attention requiring service has occurred", |
| 638 | "MessageArgSources" : [ "SRCWord6", "SRCWord7", "SRCWord8" ], |
| 639 | "Message": "hw-diags signature: %1 %2 %3" |
Ben Tyner | 3483632 | 2020-04-15 17:01:48 -0500 | [diff] [blame] | 640 | } |
Shawn McCarney | 01648f5 | 2020-06-25 11:42:02 -0500 | [diff] [blame] | 641 | }, |
| 642 | |
| 643 | { |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 644 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.InputFault", |
| 645 | "Subsystem": "power_supply", |
| 646 | "Severity": "unrecoverable_redundancy_loss", |
| 647 | "ActionFlags": ["service_action", "report"], |
| 648 | "ComponentID": "0x2700", |
| 649 | |
| 650 | "SRC": { |
| 651 | "Type": "11", |
| 652 | "ReasonCode": "0x15F0", |
| 653 | "Words6To9": {} |
| 654 | }, |
| 655 | |
| 656 | "Callouts": [ |
| 657 | { |
| 658 | "CalloutList": [ |
| 659 | { "Priority": "high", "SymbolicFRU": "pwrsply" } |
| 660 | ] |
| 661 | } |
| 662 | ], |
| 663 | |
| 664 | "Documentation": { |
| 665 | "Description": "Power Supply input power fault", |
| 666 | "Message": "A power supply has indicated an input or under voltage condition.", |
| 667 | "Notes": [ |
| 668 | "Check the power supply cabling and/or input power ", |
| 669 | "source. The PWRSPLY procedure is used rather than ", |
| 670 | "calling out a location code, as typically these faults ", |
| 671 | "are related to the supplied power, the cable, or the ", |
| 672 | "cable connectors. If the input fault resolves down to an ", |
| 673 | "issue with the power supply itself, the power supply ", |
| 674 | "indicating this input fault should be called out. Add the ", |
| 675 | "CALLOUT_INVENTORY_PATH to the additional data, and set the", |
| 676 | "CALLOUT_PRIORITY to something other than high." |
| 677 | ] |
| 678 | } |
| 679 | }, |
| 680 | |
| 681 | { |
| 682 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.Fault", |
| 683 | "Subsystem": "power_supply", |
| 684 | "Severity": "unrecoverable_redundancy_loss", |
| 685 | "ActionFlags": ["service_action", "report", "call_home"], |
| 686 | "ComponentID": "0x2700", |
| 687 | |
| 688 | "SRC": { |
| 689 | "Type": "11", |
| 690 | "ReasonCode": "0x15F1", |
| 691 | "Words6To9": {} |
| 692 | }, |
| 693 | |
| 694 | "Documentation": { |
| 695 | "Description": "Power Supply power fault", |
| 696 | "Message": "The power supply detected a fault condition, see AdditionalData for further details.", |
| 697 | "Notes": [ |
| 698 | "The power supply reporting the fault should be called ", |
| 699 | "out using the CALLOUT_INVENTORY_PATH keyword. Include ", |
| 700 | "specific fault, STATUS_* details, and code level in the ", |
| 701 | "AdditionalData section." |
| 702 | ] |
| 703 | } |
| 704 | }, |
| 705 | |
| 706 | { |
| 707 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.CommFault", |
| 708 | "Subsystem": "power_supply", |
Brandon Wyman | 981ffc3 | 2021-04-06 15:49:12 -0500 | [diff] [blame] | 709 | "Severity": "unrecoverable", |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 710 | "ActionFlags": ["service_action", "report", "call_home"], |
| 711 | "ComponentID": "0x2700", |
| 712 | |
| 713 | "SRC": { |
| 714 | "Type": "11", |
| 715 | "ReasonCode": "0x15F2", |
| 716 | "Words6To9": {} |
| 717 | }, |
| 718 | |
| 719 | "Documentation": { |
| 720 | "Description": "Power Supply non-power fault", |
| 721 | "Message": "A communication failure occurred talking to the power supply", |
| 722 | "Notes": [ |
| 723 | "Communication problems with the power supply could be ", |
| 724 | "the power supply, or any hardware between it and the ", |
| 725 | "BMC. Reporting the error should be passing in a call ", |
| 726 | "out using CALLOUT_DEVICE_PATH." |
| 727 | ] |
| 728 | } |
| 729 | }, |
| 730 | |
| 731 | { |
| 732 | "Name": "xyz.openbmc_project.Power.PowerSupply.Error.Missing", |
| 733 | "Subsystem": "power_supply", |
Brandon Wyman | 981ffc3 | 2021-04-06 15:49:12 -0500 | [diff] [blame] | 734 | "Severity": "unrecoverable_redundancy_loss", |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 735 | "ActionFlags": ["service_action", "report", "call_home"], |
| 736 | "ComponentID": "0x2700", |
| 737 | |
| 738 | "SRC": { |
| 739 | "Type": "11", |
| 740 | "ReasonCode": "0x15F6", |
| 741 | "Words6To9": {} |
| 742 | }, |
| 743 | |
| 744 | "Callouts": [ |
| 745 | { |
| 746 | "CalloutList": [ |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 747 | { |
| 748 | "Priority": "high", |
| 749 | "SymbolicFRUTrusted": "pwrsply", |
| 750 | "UseInventoryLocCode": true |
| 751 | } |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 752 | ] |
| 753 | } |
| 754 | ], |
| 755 | |
| 756 | "Documentation": { |
| 757 | "Description": "Power Supply is missing", |
| 758 | "Message": "A power supply that should be present is missing", |
| 759 | "Notes": [ |
| 760 | "The CalloutList should use the PWRSPLY symbolic FRU ", |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 761 | "with the trusted location code property. The ", |
| 762 | "location code in this callout is obtained from ", |
| 763 | "the passed in CALLOUT_INVENTORY_PATH value." |
Brandon Wyman | 38caaf0 | 2020-09-01 16:07:42 -0500 | [diff] [blame] | 764 | ] |
| 765 | } |
| 766 | }, |
| 767 | |
| 768 | { |
Jay Meyer | 54ff54e | 2021-03-14 20:18:41 -0500 | [diff] [blame] | 769 | "Name": "xyz.openbmc_project.State.Shutdown.Power.Error.Blackout", |
| 770 | "Subsystem": "power", |
| 771 | "ActionFlags": [ "report", "service_action" ], |
| 772 | "Severity": "unrecoverable", |
| 773 | "ComponentID": "0x2700", |
| 774 | |
| 775 | "SRC": |
| 776 | { |
| 777 | "Type": "11", |
| 778 | "ReasonCode": "0x00AC", |
| 779 | "Words6To9": {}, |
| 780 | "PowerFault": true |
| 781 | }, |
| 782 | |
| 783 | "Callouts": [ |
| 784 | { |
| 785 | "CalloutList": [ |
| 786 | { "Priority": "high", "SymbolicFRU": "ac_module"} |
| 787 | ] |
| 788 | } |
| 789 | ], |
| 790 | |
| 791 | "Documentation": { |
| 792 | "Description": "Input power was lost while the system was powered on.", |
| 793 | "Message": "Input power was lost while the system was powered on.", |
| 794 | "Notes": [ |
| 795 | "Input power was lost while system powered on.", |
| 796 | "The CalloutList should use the ACMODUL symbolic FRU." |
| 797 | ] |
| 798 | } |
| 799 | }, |
| 800 | |
| 801 | { |
Jim Wright | 7f67890 | 2020-11-30 16:03:57 -0600 | [diff] [blame] | 802 | "Name": "xyz.openbmc_project.Power.Error.Shutdown", |
| 803 | "Subsystem": "power_sequencer", |
| 804 | "ComponentID": "0x2700", |
| 805 | |
| 806 | "SRC": { |
| 807 | "Type": "11", |
| 808 | "ReasonCode": "0x2600", |
| 809 | "Words6To9": {} |
| 810 | }, |
| 811 | |
| 812 | "Callouts": [ |
| 813 | { |
| 814 | "CalloutList": [ |
| 815 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 816 | ] |
| 817 | } |
| 818 | ], |
| 819 | |
| 820 | "Documentation": { |
| 821 | "Description": "A power off was issued because a power fault was detected", |
| 822 | "Message": "A power off was issued because a power fault was detected", |
| 823 | "Notes": [ |
| 824 | ] |
| 825 | } |
| 826 | }, |
| 827 | |
| 828 | { |
| 829 | "Name": "xyz.openbmc_project.Power.Error.PowerSequencerPGOODFault", |
| 830 | "Subsystem": "power_sequencer", |
| 831 | "ComponentID": "0x2700", |
| 832 | |
| 833 | "SRC": { |
| 834 | "Type": "11", |
| 835 | "ReasonCode": "0x2610", |
| 836 | "Words6To9": {} |
| 837 | }, |
| 838 | |
| 839 | "CalloutsUsingAD": { |
| 840 | "ADName": "INPUT_NAME", "CalloutsWithTheirADValues": [ |
| 841 | { |
| 842 | "ADValue": "PCIE_SLOT0", "Callouts": [ |
| 843 | { |
| 844 | "CalloutList": [ |
| 845 | { "Priority": "high", "LocCode": "P0-C0" }, |
| 846 | { "Priority": "medium", "LocCode": "P0" } |
| 847 | ] |
| 848 | } |
| 849 | ] |
| 850 | }, |
| 851 | { |
| 852 | "ADValue": "PCIE_SLOT1", "Callouts": [ |
| 853 | { |
| 854 | "CalloutList": [ |
| 855 | { "Priority": "high", "LocCode": "P0-C1" }, |
| 856 | { "Priority": "medium", "LocCode": "P0" } |
| 857 | ] |
| 858 | } |
| 859 | ] |
| 860 | }, |
| 861 | { |
| 862 | "ADValue": "PCIE_SLOT2", "Callouts": [ |
| 863 | { |
| 864 | "CalloutList": [ |
| 865 | { "Priority": "high", "LocCode": "P0-C2" }, |
| 866 | { "Priority": "medium", "LocCode": "P0" } |
| 867 | ] |
| 868 | } |
| 869 | ] |
| 870 | }, |
| 871 | { |
| 872 | "ADValue": "PCIE_SLOT3", "Callouts": [ |
| 873 | { |
| 874 | "CalloutList": [ |
| 875 | { "Priority": "high", "LocCode": "P0-C3" }, |
| 876 | { "Priority": "medium", "LocCode": "P0" } |
| 877 | ] |
| 878 | } |
| 879 | ] |
| 880 | }, |
| 881 | { |
| 882 | "ADValue": "PCIE_SLOT4", "Callouts": [ |
| 883 | { |
| 884 | "CalloutList": [ |
| 885 | { "Priority": "high", "LocCode": "P0-C4" }, |
| 886 | { "Priority": "medium", "LocCode": "P0" } |
| 887 | ] |
| 888 | } |
| 889 | ] |
| 890 | }, |
| 891 | { |
| 892 | "ADValue": "PCIE_SLOT7", "Callouts": [ |
| 893 | { |
| 894 | "CalloutList": [ |
| 895 | { "Priority": "high", "LocCode": "P0-C7" }, |
| 896 | { "Priority": "medium", "LocCode": "P0" } |
| 897 | ] |
| 898 | } |
| 899 | ] |
| 900 | }, |
| 901 | { |
| 902 | "ADValue": "PCIE_SLOT8", "Callouts": [ |
| 903 | { |
| 904 | "CalloutList": [ |
| 905 | { "Priority": "high", "LocCode": "P0-C8" }, |
| 906 | { "Priority": "medium", "LocCode": "P0" } |
| 907 | ] |
| 908 | } |
| 909 | ] |
| 910 | }, |
| 911 | { |
| 912 | "ADValue": "PCIE_SLOT9", "Callouts": [ |
| 913 | { |
| 914 | "CalloutList": [ |
| 915 | { "Priority": "high", "LocCode": "P0-C9" }, |
| 916 | { "Priority": "medium", "LocCode": "P0" } |
| 917 | ] |
| 918 | } |
| 919 | ] |
| 920 | }, |
| 921 | { |
| 922 | "ADValue": "PCIE_SLOT10", "Callouts": [ |
| 923 | { |
| 924 | "CalloutList": [ |
| 925 | { "Priority": "high", "LocCode": "P0-C10" }, |
| 926 | { "Priority": "medium", "LocCode": "P0" } |
| 927 | ] |
| 928 | } |
| 929 | ] |
| 930 | }, |
| 931 | { |
| 932 | "ADValue": "PCIE_SLOT11", "Callouts": [ |
| 933 | { |
| 934 | "CalloutList": [ |
| 935 | { "Priority": "high", "LocCode": "P0-C11" }, |
| 936 | { "Priority": "medium", "LocCode": "P0" } |
| 937 | ] |
| 938 | } |
| 939 | ] |
| 940 | }, |
| 941 | { |
| 942 | "ADValue": "PGOOD_12A", "Callouts": [ |
| 943 | { |
| 944 | "CalloutList": [ |
| 945 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 946 | ] |
| 947 | } |
| 948 | ] |
| 949 | }, |
| 950 | { |
| 951 | "ADValue": "PGOOD_12B", "Callouts": [ |
| 952 | { |
| 953 | "CalloutList": [ |
| 954 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 955 | ] |
| 956 | } |
| 957 | ] |
| 958 | }, |
| 959 | { |
| 960 | "ADValue": "PGOOD_12C", "Callouts": [ |
| 961 | { |
| 962 | "CalloutList": [ |
| 963 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 964 | ] |
| 965 | } |
| 966 | ] |
| 967 | }, |
| 968 | { |
| 969 | "ADValue": "PGOOD_12D", "Callouts": [ |
| 970 | { |
| 971 | "CalloutList": [ |
| 972 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 973 | ] |
| 974 | } |
| 975 | ] |
| 976 | }, |
| 977 | { |
| 978 | "ADValue": "PGOOD_12L", "Callouts": [ |
| 979 | { |
| 980 | "CalloutList": [ |
| 981 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 982 | ] |
| 983 | } |
| 984 | ] |
| 985 | }, |
| 986 | { |
| 987 | "ADValue": "PGOOD_12M", "Callouts": [ |
| 988 | { |
| 989 | "CalloutList": [ |
| 990 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 991 | ] |
| 992 | } |
| 993 | ] |
| 994 | }, |
| 995 | { |
| 996 | "ADValue": "PGOOD_12N", "Callouts": [ |
| 997 | { |
| 998 | "CalloutList": [ |
| 999 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1000 | ] |
| 1001 | } |
| 1002 | ] |
| 1003 | }, |
| 1004 | { |
| 1005 | "ADValue": "PGOOD_12P", "Callouts": [ |
| 1006 | { |
| 1007 | "CalloutList": [ |
| 1008 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1009 | ] |
| 1010 | } |
| 1011 | ] |
| 1012 | }, |
| 1013 | { |
| 1014 | "ADValue": "PGOOD_12PCIE", "Callouts": [ |
| 1015 | { |
| 1016 | "CalloutList": [ |
| 1017 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1018 | ] |
| 1019 | } |
| 1020 | ] |
| 1021 | }, |
| 1022 | { |
| 1023 | "ADValue": "PGOOD_12Q", "Callouts": [ |
| 1024 | { |
| 1025 | "CalloutList": [ |
| 1026 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1027 | ] |
| 1028 | } |
| 1029 | ] |
| 1030 | }, |
| 1031 | { |
| 1032 | "ADValue": "PGOOD_12R", "Callouts": [ |
| 1033 | { |
| 1034 | "CalloutList": [ |
| 1035 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1036 | ] |
| 1037 | } |
| 1038 | ] |
| 1039 | }, |
| 1040 | { |
| 1041 | "ADValue": "PGOOD_VDN_DCM0", "Callouts": [ |
| 1042 | { |
| 1043 | "CalloutList": [ |
| 1044 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1045 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1046 | { "Priority": "low", "LocCode": "P0" } |
| 1047 | ] |
| 1048 | } |
| 1049 | ] |
| 1050 | }, |
| 1051 | { |
| 1052 | "ADValue": "PGOOD_VDN_DCM1", "Callouts": [ |
| 1053 | { |
| 1054 | "CalloutList": [ |
| 1055 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1056 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1057 | { "Priority": "low", "LocCode": "P0" } |
| 1058 | ] |
| 1059 | } |
| 1060 | ] |
| 1061 | }, |
| 1062 | { |
| 1063 | "ADValue": "PGOOD_VCS_DCM0", "Callouts": [ |
| 1064 | { |
| 1065 | "CalloutList": [ |
| 1066 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1067 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1068 | { "Priority": "low", "LocCode": "P0" } |
| 1069 | ] |
| 1070 | } |
| 1071 | ] |
| 1072 | }, |
| 1073 | { |
| 1074 | "ADValue": "PGOOD_VCS_DCM1", "Callouts": [ |
| 1075 | { |
| 1076 | "CalloutList": [ |
| 1077 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1078 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1079 | { "Priority": "low", "LocCode": "P0" } |
| 1080 | ] |
| 1081 | } |
| 1082 | ] |
| 1083 | }, |
| 1084 | { |
| 1085 | "ADValue": "PGOOD_VIO_DCM0", "Callouts": [ |
| 1086 | { |
| 1087 | "CalloutList": [ |
| 1088 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1089 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1090 | { "Priority": "low", "LocCode": "P0" } |
| 1091 | ] |
| 1092 | } |
| 1093 | ] |
| 1094 | }, |
| 1095 | { |
| 1096 | "ADValue": "PGOOD_VIO_DCM1", "Callouts": [ |
| 1097 | { |
| 1098 | "CalloutList": [ |
| 1099 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1100 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1101 | { "Priority": "low", "LocCode": "P0" } |
| 1102 | ] |
| 1103 | } |
| 1104 | ] |
| 1105 | }, |
| 1106 | { |
| 1107 | "ADValue": "PGOOD_VPCIE_DCM0", "Callouts": [ |
| 1108 | { |
| 1109 | "CalloutList": [ |
| 1110 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1111 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1112 | { "Priority": "low", "LocCode": "P0" } |
| 1113 | ] |
| 1114 | } |
| 1115 | ] |
| 1116 | }, |
| 1117 | { |
| 1118 | "ADValue": "PGOOD_VPCIE_DCM1", "Callouts": [ |
| 1119 | { |
| 1120 | "CalloutList": [ |
| 1121 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1122 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1123 | { "Priority": "low", "LocCode": "P0" } |
| 1124 | ] |
| 1125 | } |
| 1126 | ] |
| 1127 | } |
| 1128 | ] |
| 1129 | }, |
| 1130 | |
| 1131 | "Documentation": { |
| 1132 | "Description": "The power sequencer chip detected a PGOOD fault", |
| 1133 | "Message": "The power sequencer chip detected a PGOOD fault", |
| 1134 | "Notes": [ |
| 1135 | ] |
| 1136 | } |
| 1137 | }, |
| 1138 | |
| 1139 | { |
| 1140 | "Name": "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault", |
| 1141 | "Subsystem": "power_sequencer", |
| 1142 | "ComponentID": "0x2700", |
| 1143 | |
| 1144 | "SRC": { |
| 1145 | "Type": "11", |
| 1146 | "ReasonCode": "0x2620", |
| 1147 | "Words6To9": {} |
| 1148 | }, |
| 1149 | |
| 1150 | "CalloutsUsingAD": { |
| 1151 | "ADName": "RAIL_NAME", "CalloutsWithTheirADValues": [ |
| 1152 | { |
| 1153 | "ADValue": "12.0V", "Callouts": [ |
| 1154 | { |
| 1155 | "CalloutList": [ |
| 1156 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1157 | ] |
| 1158 | } |
| 1159 | ] |
| 1160 | }, |
| 1161 | { |
| 1162 | "ADValue": "5.0V_USB", "Callouts": [ |
| 1163 | { |
| 1164 | "CalloutList": [ |
| 1165 | { "Priority": "high", "SymbolicFRU": "usb_pgood" }, |
| 1166 | { "Priority": "medium", "LocCode": "P0" } |
| 1167 | ] |
| 1168 | } |
| 1169 | ] |
| 1170 | }, |
| 1171 | { |
| 1172 | "ADValue": "5.0V_DASD", "Callouts": [ |
| 1173 | { |
| 1174 | "CalloutList": [ |
| 1175 | { "Priority": "medium", "LocCode": "P1" }, |
| 1176 | { "Priority": "medium", "LocCode": "P2" }, |
| 1177 | { "Priority": "medium", "LocCode": "P3" }, |
| 1178 | { "Priority": "low", "LocCode": "P0" } |
| 1179 | ] |
| 1180 | } |
| 1181 | ] |
| 1182 | }, |
| 1183 | { |
| 1184 | "ADValue": "3.3VA", "Callouts": [ |
| 1185 | { |
| 1186 | "CalloutList": [ |
| 1187 | { "Priority": "high", "LocCode": "P0" } |
| 1188 | ] |
| 1189 | } |
| 1190 | ] |
| 1191 | }, |
| 1192 | { |
| 1193 | "ADValue": "3.3VB", "Callouts": [ |
| 1194 | { |
| 1195 | "CalloutList": [ |
| 1196 | { "Priority": "high", "LocCode": "P0" } |
| 1197 | ] |
| 1198 | } |
| 1199 | ] |
| 1200 | }, |
| 1201 | { |
| 1202 | "ADValue": "1.5V", "Callouts": [ |
| 1203 | { |
| 1204 | "CalloutList": [ |
| 1205 | { "Priority": "high", "LocCode": "P0" } |
| 1206 | ] |
| 1207 | } |
| 1208 | ] |
| 1209 | }, |
| 1210 | { |
| 1211 | "ADValue": "1.1V", "Callouts": [ |
| 1212 | { |
| 1213 | "CalloutList": [ |
| 1214 | { "Priority": "high", "LocCode": "P0" } |
| 1215 | ] |
| 1216 | } |
| 1217 | ] |
| 1218 | }, |
| 1219 | { |
| 1220 | "ADValue": "VDDA_DCM0", "Callouts": [ |
| 1221 | { |
| 1222 | "CalloutList": [ |
| 1223 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1224 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1225 | { "Priority": "low", "LocCode": "P0" } |
| 1226 | ] |
| 1227 | } |
| 1228 | ] |
| 1229 | }, |
| 1230 | { |
| 1231 | "ADValue": "VDDB_DCM0", "Callouts": [ |
| 1232 | { |
| 1233 | "CalloutList": [ |
| 1234 | { "Priority": "high", "LocCode": "P0-C14" }, |
| 1235 | { "Priority": "medium", "LocCode": "P0-C15" }, |
| 1236 | { "Priority": "low", "LocCode": "P0" } |
| 1237 | ] |
| 1238 | } |
| 1239 | ] |
| 1240 | }, |
| 1241 | { |
| 1242 | "ADValue": "VDDA_DCM1", "Callouts": [ |
| 1243 | { |
| 1244 | "CalloutList": [ |
| 1245 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1246 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1247 | { "Priority": "low", "LocCode": "P0" } |
| 1248 | ] |
| 1249 | } |
| 1250 | ] |
| 1251 | }, |
| 1252 | { |
| 1253 | "ADValue": "VDDB_DCM1", "Callouts": [ |
| 1254 | { |
| 1255 | "CalloutList": [ |
| 1256 | { "Priority": "high", "LocCode": "P0-C23" }, |
| 1257 | { "Priority": "medium", "LocCode": "P0-C24" }, |
| 1258 | { "Priority": "low", "LocCode": "P0" } |
| 1259 | ] |
| 1260 | } |
| 1261 | ] |
| 1262 | }, |
| 1263 | { |
| 1264 | "ADValue": "12.0VCS", "Callouts": [ |
| 1265 | { |
| 1266 | "CalloutList": [ |
| 1267 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1268 | ] |
| 1269 | } |
| 1270 | ] |
| 1271 | }, |
| 1272 | { |
| 1273 | "ADValue": "3.3VCS", "Callouts": [ |
| 1274 | { |
| 1275 | "CalloutList": [ |
| 1276 | { "Priority": "high", "LocCode": "P0" } |
| 1277 | ] |
| 1278 | } |
| 1279 | ] |
| 1280 | }, |
| 1281 | { |
| 1282 | "ADValue": "1.1V_Current", "Callouts": [ |
| 1283 | { |
| 1284 | "CalloutList": [ |
| 1285 | { "Priority": "high", "LocCode": "P0" } |
| 1286 | ] |
| 1287 | } |
| 1288 | ] |
| 1289 | }, |
| 1290 | { |
| 1291 | "ADValue": "5.0V_USB_Current", "Callouts": [ |
| 1292 | { |
| 1293 | "CalloutList": [ |
| 1294 | { "Priority": "high", "SymbolicFRU": "usb_pgood" }, |
| 1295 | { "Priority": "medium", "LocCode": "P0" } |
| 1296 | ] |
| 1297 | } |
| 1298 | ] |
| 1299 | }, |
| 1300 | { |
| 1301 | "ADValue": "5.0V_DASD_Current", "Callouts": [ |
| 1302 | { |
| 1303 | "CalloutList": [ |
| 1304 | { "Priority": "medium", "LocCode": "P1" }, |
| 1305 | { "Priority": "medium", "LocCode": "P2" }, |
| 1306 | { "Priority": "medium", "LocCode": "P3" }, |
| 1307 | { "Priority": "low", "LocCode": "P0" } |
| 1308 | ] |
| 1309 | } |
| 1310 | ] |
| 1311 | }, |
| 1312 | { |
| 1313 | "ADValue": "12.0VN", "Callouts": [ |
| 1314 | { |
| 1315 | "CalloutList": [ |
| 1316 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1317 | ] |
| 1318 | } |
| 1319 | ] |
| 1320 | }, |
| 1321 | { |
| 1322 | "ADValue": "12.0VP", "Callouts": [ |
| 1323 | { |
| 1324 | "CalloutList": [ |
| 1325 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1326 | ] |
| 1327 | } |
| 1328 | ] |
| 1329 | }, |
| 1330 | { |
| 1331 | "ADValue": "12.0VQ", "Callouts": [ |
| 1332 | { |
| 1333 | "CalloutList": [ |
| 1334 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1335 | ] |
| 1336 | } |
| 1337 | ] |
| 1338 | }, |
| 1339 | { |
| 1340 | "ADValue": "12.0VR", "Callouts": [ |
| 1341 | { |
| 1342 | "CalloutList": [ |
| 1343 | { "Priority": "high", "SymbolicFRU": "pgood_part" } |
| 1344 | ] |
| 1345 | } |
| 1346 | ] |
| 1347 | }, |
| 1348 | { |
| 1349 | "ADValue": "ThermalDiode1", "Callouts": [ |
| 1350 | { |
| 1351 | "CalloutList": [ |
| 1352 | { "Priority": "high", "LocCode": "P0" } |
| 1353 | ] |
| 1354 | } |
| 1355 | ] |
| 1356 | }, |
| 1357 | { |
| 1358 | "ADValue": "ThermalDiode2", "Callouts": [ |
| 1359 | { |
| 1360 | "CalloutList": [ |
| 1361 | { "Priority": "high", "LocCode": "P0" } |
| 1362 | ] |
| 1363 | } |
| 1364 | ] |
| 1365 | }, |
| 1366 | { |
| 1367 | "ADValue": "ThermalDiode3", "Callouts": [ |
| 1368 | { |
| 1369 | "CalloutList": [ |
| 1370 | { "Priority": "high", "LocCode": "P0" } |
| 1371 | ] |
| 1372 | } |
| 1373 | ] |
| 1374 | }, |
| 1375 | { |
| 1376 | "ADValue": "ThermalDiode4", "Callouts": [ |
| 1377 | { |
| 1378 | "CalloutList": [ |
| 1379 | { "Priority": "high", "LocCode": "P0" } |
| 1380 | ] |
| 1381 | } |
| 1382 | ] |
| 1383 | } |
| 1384 | ] |
| 1385 | }, |
| 1386 | |
| 1387 | "Documentation": { |
| 1388 | "Description": "The power sequencer chip detected a voltage fault", |
| 1389 | "Message": "The power sequencer chip detected a voltage fault", |
| 1390 | "Notes": [ |
| 1391 | ] |
| 1392 | } |
| 1393 | }, |
| 1394 | |
| 1395 | { |
Shawn McCarney | 01648f5 | 2020-06-25 11:42:02 -0500 | [diff] [blame] | 1396 | "Name": "xyz.openbmc_project.Power.Regulators.Error.WriteVerification", |
| 1397 | "Subsystem": "power", |
| 1398 | "ComponentID": "0x2700", |
| 1399 | |
| 1400 | "SRC": { |
| 1401 | "Type": "11", |
| 1402 | "ReasonCode": "0x2900", |
| 1403 | "Words6To9": {} |
| 1404 | }, |
| 1405 | |
| 1406 | "Documentation": { |
| 1407 | "Description": "A write verification error occurred on a device", |
| 1408 | "Message": "A write verification error occurred on a device", |
| 1409 | "Notes": [ |
| 1410 | "This error occurs when a device register is written, ", |
| 1411 | "read back, and the two values do not match. This is ", |
| 1412 | "also called a read-back error. The device should be ", |
| 1413 | "identified using the CALLOUT_DEVICE_PATH or ", |
| 1414 | "CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR keywords in the ", |
| 1415 | "AdditionalData property of the event log. This will ", |
| 1416 | "cause the device and the hardware in the communication ", |
| 1417 | "path to be called out." |
| 1418 | ] |
| 1419 | } |
| 1420 | }, |
| 1421 | |
| 1422 | { |
| 1423 | "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile", |
| 1424 | "Subsystem": "power", |
| 1425 | "ComponentID": "0x2700", |
| 1426 | |
| 1427 | "SRC": { |
| 1428 | "Type": "11", |
| 1429 | "ReasonCode": "0xA013", |
| 1430 | "Words6To9": {} |
| 1431 | }, |
| 1432 | |
| 1433 | "Callouts": [ |
| 1434 | { |
| 1435 | "CalloutList": [ |
| 1436 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1437 | ] |
| 1438 | } |
| 1439 | ], |
| 1440 | |
| 1441 | "Documentation": { |
| 1442 | "Description": "A regulators configuration file error occurred", |
| 1443 | "Message": "A regulators configuration file error occurred", |
| 1444 | "Notes": [ |
| 1445 | "The regulators configuration file could not be found, ", |
| 1446 | "could not be read, or had invalid contents." |
| 1447 | ] |
| 1448 | } |
| 1449 | }, |
| 1450 | |
| 1451 | { |
Shawn McCarney | 82e31d8 | 2021-02-19 16:25:55 -0600 | [diff] [blame] | 1452 | "Name": "xyz.openbmc_project.Power.Regulators.Error.ConfigFile.Critical", |
| 1453 | "Subsystem": "power", |
| 1454 | "Severity": "critical_system_term", |
| 1455 | "ComponentID": "0x2700", |
| 1456 | |
| 1457 | "SRC": { |
| 1458 | "Type": "11", |
| 1459 | "ReasonCode": "0xA014", |
| 1460 | "Words6To9": {}, |
| 1461 | "PowerFault": true |
| 1462 | }, |
| 1463 | |
| 1464 | "Callouts": [ |
| 1465 | { |
| 1466 | "CalloutList": [ |
| 1467 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1468 | ] |
| 1469 | } |
| 1470 | ], |
| 1471 | |
| 1472 | "Documentation": { |
| 1473 | "Description": "A critical regulators configuration file error occurred", |
| 1474 | "Message": "A critical regulators configuration file error occurred", |
| 1475 | "Notes": [ |
| 1476 | "The regulators configuration file could not be found, ", |
| 1477 | "could not be read, or had invalid contents. As a result ", |
| 1478 | "voltage regulators could not be configured, and the ", |
| 1479 | "chassis could not be powered on." |
| 1480 | ] |
| 1481 | } |
| 1482 | }, |
| 1483 | |
| 1484 | { |
Jim Wright | 7f67890 | 2020-11-30 16:03:57 -0600 | [diff] [blame] | 1485 | "Name": "xyz.openbmc_project.Power.Error.PowerSequencerFault", |
| 1486 | "Subsystem": "power_sequencer", |
| 1487 | "ComponentID": "0x2700", |
| 1488 | |
| 1489 | "SRC": { |
| 1490 | "Type": "11", |
| 1491 | "ReasonCode": "0xD000", |
| 1492 | "Words6To9": {} |
| 1493 | }, |
| 1494 | |
| 1495 | "Callouts": [ |
| 1496 | { |
| 1497 | "CalloutList": [ |
| 1498 | { "Priority": "high", "LocCode": "P0" } |
| 1499 | ] |
| 1500 | } |
| 1501 | ], |
| 1502 | |
| 1503 | "Documentation": { |
| 1504 | "Description": "The power sequencer chip detected a fault", |
| 1505 | "Message": "The power sequencer chip detected a fault", |
| 1506 | "Notes": [ |
| 1507 | ] |
| 1508 | } |
| 1509 | }, |
| 1510 | |
| 1511 | { |
| 1512 | "Name": "xyz.openbmc_project.Power.Error.PowerOnFailure", |
| 1513 | "Subsystem": "power_sequencer", |
| 1514 | "ComponentID": "0x2700", |
| 1515 | |
| 1516 | "SRC": { |
| 1517 | "Type": "11", |
| 1518 | "ReasonCode": "0xD002", |
| 1519 | "Words6To9": {} |
| 1520 | }, |
| 1521 | |
| 1522 | "Callouts": [ |
| 1523 | { |
| 1524 | "CalloutList": [ |
| 1525 | { "Priority": "high", "LocCode": "P0" } |
| 1526 | ] |
| 1527 | } |
| 1528 | ], |
| 1529 | |
| 1530 | "Documentation": { |
| 1531 | "Description": "System power failed to turn on", |
| 1532 | "Message": "System power failed to turn on", |
| 1533 | "Notes": [ |
| 1534 | ] |
| 1535 | } |
| 1536 | }, |
| 1537 | |
| 1538 | { |
Shawn McCarney | 01648f5 | 2020-06-25 11:42:02 -0500 | [diff] [blame] | 1539 | "Name": "xyz.openbmc_project.Power.Error.Internal", |
| 1540 | "Subsystem": "power", |
| 1541 | "ComponentID": "0x2700", |
| 1542 | |
| 1543 | "SRC": { |
| 1544 | "Type": "11", |
| 1545 | "ReasonCode": "0xE000", |
| 1546 | "Words6To9": {} |
| 1547 | }, |
| 1548 | |
| 1549 | "Callouts": [ |
| 1550 | { |
| 1551 | "CalloutList": [ |
| 1552 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1553 | ] |
| 1554 | } |
| 1555 | ], |
| 1556 | |
| 1557 | "Documentation": { |
| 1558 | "Description": "An internal firmware error occurred", |
| 1559 | "Message": "An internal firmware error occurred", |
| 1560 | "Notes": [ |
| 1561 | "The error details must be provided in the AdditionalData ", |
| 1562 | "property of the event log." |
| 1563 | ] |
| 1564 | } |
| 1565 | }, |
| 1566 | |
| 1567 | { |
| 1568 | "Name": "xyz.openbmc_project.Power.Error.I2C", |
| 1569 | "Subsystem": "cec_i2c", |
| 1570 | "ComponentID": "0x2700", |
| 1571 | |
| 1572 | "SRC": { |
| 1573 | "Type": "11", |
| 1574 | "ReasonCode": "0xE100", |
| 1575 | "Words6To9": {} |
| 1576 | }, |
| 1577 | |
| 1578 | "Documentation": { |
| 1579 | "Description": "An I2C error occurred communicating with a device", |
| 1580 | "Message": "An I2C error occurred communicating with a device", |
| 1581 | "Notes": [ |
| 1582 | "The device should be identified using the ", |
| 1583 | "CALLOUT_DEVICE_PATH or CALLOUT_IIC_BUS/CALLOUT_IIC_ADDR ", |
| 1584 | "keywords in the AdditionalData property of the event ", |
| 1585 | "log. This will cause the device and the hardware in the ", |
| 1586 | "communication path to be called out." |
| 1587 | ] |
| 1588 | } |
| 1589 | }, |
| 1590 | |
| 1591 | { |
| 1592 | "Name": "xyz.openbmc_project.Power.Error.PMBus", |
| 1593 | "Subsystem": "power", |
| 1594 | "ComponentID": "0x2700", |
| 1595 | |
| 1596 | "SRC": { |
| 1597 | "Type": "11", |
| 1598 | "ReasonCode": "0xE200", |
| 1599 | "Words6To9": {} |
| 1600 | }, |
| 1601 | |
| 1602 | "Documentation": { |
| 1603 | "Description": "A PMBus error occurred on a device", |
| 1604 | "Message": "A PMBus error occurred on a device", |
| 1605 | "Notes": [ |
| 1606 | "This error occurs when the I2C communication was ", |
| 1607 | "successful, but the PMBus value read is invalid or ", |
| 1608 | "unsupported. CALLOUT_INVENTORY_PATH should be specified ", |
| 1609 | "in the AdditionalData property of the event log so that ", |
| 1610 | "the device is called out but not the communication path." |
| 1611 | ] |
| 1612 | } |
| 1613 | }, |
| 1614 | |
| 1615 | { |
| 1616 | "Name": "xyz.openbmc_project.Power.Error.DBus", |
| 1617 | "Subsystem": "power", |
| 1618 | "ComponentID": "0x2700", |
| 1619 | |
| 1620 | "SRC": { |
| 1621 | "Type": "11", |
| 1622 | "ReasonCode": "0xE300", |
| 1623 | "Words6To9": {} |
| 1624 | }, |
| 1625 | |
| 1626 | "Callouts": [ |
| 1627 | { |
| 1628 | "CalloutList": [ |
| 1629 | { "Priority": "high", "Procedure": "bmc_code" } |
| 1630 | ] |
| 1631 | } |
| 1632 | ], |
| 1633 | |
| 1634 | "Documentation": { |
| 1635 | "Description": "A firmware inter-process communication (D-Bus) error occurred", |
| 1636 | "Message": "A firmware inter-process communication (D-Bus) error occurred" |
| 1637 | } |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1638 | }, |
| 1639 | |
| 1640 | { |
Matt Spinler | 7c9c07e | 2020-10-22 10:16:37 -0500 | [diff] [blame] | 1641 | "Name": "xyz.openbmc_project.Fan.Error.Fault", |
| 1642 | "Subsystem": "power_fans", |
| 1643 | "ComponentID": "0x2800", |
| 1644 | |
| 1645 | "SRC": { |
| 1646 | "Type": "11", |
| 1647 | "ReasonCode": "0x76F0", |
| 1648 | "Words6To9": {} |
| 1649 | }, |
| 1650 | |
| 1651 | "Documentation": { |
| 1652 | "Description": "Fan rotor fault", |
| 1653 | "Message": "Fan rotor fault", |
| 1654 | "Notes": [ |
| 1655 | "This error occurs when a fan rotor has been faulted for a ", |
| 1656 | "certain amount of time. The callout is the fan which is ", |
| 1657 | "passed in with CALLOUT_INVENTORY_PATH. The severity is ", |
| 1658 | "passed in during creation and will be either informational ", |
| 1659 | "or unrecoverable. The action flags use the defaults and ", |
| 1660 | "vary based on the severity." |
| 1661 | ] |
| 1662 | } |
| 1663 | }, |
| 1664 | |
| 1665 | { |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1666 | "Name": "xyz.openbmc_project.Fan.Error.Missing", |
| 1667 | "Subsystem": "power_fans", |
| 1668 | "ComponentID": "0x2800", |
| 1669 | "Severity": "unrecoverable_redundancy_loss", |
| 1670 | "ActionFlags": ["service_action", "report", "call_home"], |
| 1671 | |
| 1672 | "SRC": { |
| 1673 | "Type": "11", |
| 1674 | "ReasonCode": "0x76F1", |
| 1675 | "Words6To9": {} |
| 1676 | }, |
| 1677 | |
| 1678 | "Callouts": [ |
| 1679 | { |
Matt Spinler | 938ac79 | 2021-05-12 10:46:44 -0500 | [diff] [blame] | 1680 | "System": "ibm,rainier", |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1681 | "CalloutList": [ |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 1682 | { |
| 1683 | "Priority": "high", |
| 1684 | "SymbolicFRUTrusted": "air_mover", |
| 1685 | "UseInventoryLocCode": true |
| 1686 | }, |
| 1687 | { |
| 1688 | "Priority": "low", |
| 1689 | "LocCode": "P0" |
| 1690 | } |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1691 | ] |
Matt Spinler | 938ac79 | 2021-05-12 10:46:44 -0500 | [diff] [blame] | 1692 | }, |
| 1693 | { |
| 1694 | "System": "ibm,everest", |
| 1695 | "CalloutList": [ |
| 1696 | { |
| 1697 | "Priority": "high", |
| 1698 | "SymbolicFRUTrusted": "air_mover", |
| 1699 | "UseInventoryLocCode": true |
| 1700 | }, |
| 1701 | { |
| 1702 | "Priority": "low", |
| 1703 | "LocCode": "P1" |
| 1704 | } |
| 1705 | ] |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1706 | } |
| 1707 | ], |
| 1708 | |
| 1709 | "Documentation": { |
| 1710 | "Description": "A fan is missing", |
| 1711 | "Message": "A fan is missing", |
| 1712 | "Notes": [ |
| 1713 | "This error occurs when a fan has been missing for a ", |
Matt Spinler | 8060019 | 2020-10-23 09:29:33 -0500 | [diff] [blame] | 1714 | "certain amount of time. The first callout is the ", |
| 1715 | "symbolic FRU AIR_MOVR that has the trusted fan location ", |
| 1716 | "code, which it gets using the passed in ", |
| 1717 | "CALLOUT_INVENTORY_PATH. The second callout is the FRU ", |
Matt Spinler | 938ac79 | 2021-05-12 10:46:44 -0500 | [diff] [blame] | 1718 | "where the controller and GPIO expander are." |
Matt Spinler | 60d1c39 | 2020-09-23 15:23:24 -0500 | [diff] [blame] | 1719 | ] |
| 1720 | } |
SunnySrivastava1984 | 1ec60ea | 2020-09-03 07:07:25 -0500 | [diff] [blame] | 1721 | }, |
| 1722 | |
| 1723 | { |
Matt Spinler | adf070b | 2021-04-21 13:39:45 -0500 | [diff] [blame] | 1724 | "Name": "xyz.openbmc_project.Fan.Presence.Error.Detection", |
| 1725 | "ComponentID": "0x2800", |
| 1726 | "Subsystem": "power_fans", |
| 1727 | "Severity": "non_error", |
| 1728 | "ActionFlags": ["report"], |
| 1729 | "MfgSeverity": "predictive", |
| 1730 | "MfgActionFlags": ["service_action", "report"], |
| 1731 | |
| 1732 | "SRC": { |
| 1733 | "Type": "11", |
| 1734 | "ReasonCode": "0x76F2", |
| 1735 | "Words6To9": {} |
| 1736 | }, |
| 1737 | |
| 1738 | "Callouts": [ |
| 1739 | { |
| 1740 | "System": "ibm,rainier", |
| 1741 | "CalloutList": [ |
| 1742 | {"Priority": "medium", "LocCode": "P0"} |
| 1743 | ] |
| 1744 | }, |
| 1745 | { |
| 1746 | "System": "ibm,everest", |
| 1747 | "CalloutList": [ |
| 1748 | {"Priority": "medium", "LocCode": "P1"} |
| 1749 | ] |
| 1750 | } |
| 1751 | ], |
| 1752 | |
| 1753 | "Documentation": { |
| 1754 | "Description": "Presence detect methods for the same fan disagree", |
| 1755 | "Message": "Presence detect methods for the same fan disagree", |
| 1756 | "Notes": [ |
| 1757 | "This error occurs when there is more than one way to detect", |
| 1758 | "fan presence, and they don't all agree. For example, the", |
| 1759 | "GPIO says a fan isn't present, but the tach readings are", |
| 1760 | "nonzero. This is informational, unless in manufacturing.", |
| 1761 | "The fan FRU is passed in as a high priority callout.", |
| 1762 | "The FRU the GPIO source is on is called out medium." |
| 1763 | ] |
| 1764 | } |
| 1765 | }, |
| 1766 | |
| 1767 | { |
Matt Spinler | 86e40dd | 2021-01-29 11:19:36 -0600 | [diff] [blame] | 1768 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHigh", |
| 1769 | "Subsystem": "power", |
| 1770 | "ComponentID": "0x2800", |
| 1771 | "Severity": "predictive", |
| 1772 | "ActionFlags": ["service_action", "report"], |
| 1773 | |
| 1774 | "SRC": { |
| 1775 | "ReasonCode": "0x2801", |
| 1776 | "Words6To9": {} |
| 1777 | }, |
| 1778 | |
| 1779 | "CalloutsUsingAD": { |
| 1780 | "ADName": "SENSOR_NAME", |
| 1781 | "CalloutsWithTheirADValues": [ |
| 1782 | { |
| 1783 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 1784 | "Callouts": [ |
| 1785 | { |
| 1786 | "CalloutList": [ |
| 1787 | { "Priority": "high", "SymbolicFRU": "ambient_temp" } |
| 1788 | ] |
| 1789 | } |
| 1790 | ] |
| 1791 | } |
| 1792 | ] |
| 1793 | }, |
| 1794 | |
| 1795 | "Documentation": { |
| 1796 | "Description": "A temperature sensor exceeded its performance loss threshold.", |
| 1797 | "Message": "A temperature sensor exceeded its performance loss threshold.", |
| 1798 | "Notes": [ |
| 1799 | "A temperature sensor crossed its performance loss threshold value", |
| 1800 | "If it is the ambient sensor, then a symbolic FRU will be added.", |
| 1801 | "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add", |
| 1802 | "a FRU callout." |
| 1803 | ] |
| 1804 | } |
| 1805 | }, |
| 1806 | |
| 1807 | { |
| 1808 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperaturePerfLossHighClear", |
| 1809 | "Subsystem": "power", |
| 1810 | "ComponentID": "0x2800", |
| 1811 | "Severity": "non_error", |
| 1812 | "ActionFlags": ["report"], |
| 1813 | "EventType": "env_normal", |
| 1814 | |
| 1815 | "SRC": { |
| 1816 | "ReasonCode": "0x2802", |
| 1817 | "Words6To9": {} |
| 1818 | }, |
| 1819 | |
| 1820 | "CalloutsUsingAD": { |
| 1821 | "ADName": "SENSOR_NAME", |
| 1822 | "CalloutsWithTheirADValues": [ |
| 1823 | { |
| 1824 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 1825 | "Callouts": [ |
| 1826 | { |
| 1827 | "CalloutList": [ |
| 1828 | { "Priority": "high", "SymbolicFRU": "ambient_temp_back" } |
| 1829 | ] |
| 1830 | } |
| 1831 | ] |
| 1832 | } |
| 1833 | ] |
| 1834 | }, |
| 1835 | |
| 1836 | "Documentation": { |
| 1837 | "Description": "A temperature sensor is under its performance loss threshold.", |
| 1838 | "Message": "A temperature sensor is under its performance loss threshold.", |
| 1839 | "Notes": [ |
| 1840 | "A temperature sensor crossed under its performance loss threshold value", |
| 1841 | "If it is the ambient sensor, then a symbolic FRU will be added." |
| 1842 | ] |
| 1843 | } |
| 1844 | }, |
| 1845 | |
| 1846 | { |
| 1847 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHigh", |
| 1848 | "Subsystem": "power", |
| 1849 | "ComponentID": "0x2800", |
| 1850 | "Severity": "predictive", |
| 1851 | "ActionFlags": ["service_action", "report"], |
| 1852 | |
| 1853 | "SRC": { |
| 1854 | "ReasonCode": "0x2803", |
| 1855 | "Words6To9": {} |
| 1856 | }, |
| 1857 | |
| 1858 | "CalloutsUsingAD": { |
| 1859 | "ADName": "SENSOR_NAME", |
| 1860 | "CalloutsWithTheirADValues": [ |
| 1861 | { |
| 1862 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 1863 | "Callouts": [ |
| 1864 | { |
| 1865 | "CalloutList": [ |
| 1866 | { "Priority": "high", "SymbolicFRU": "ambient_temp" } |
| 1867 | ] |
| 1868 | } |
| 1869 | ] |
| 1870 | } |
| 1871 | ] |
| 1872 | }, |
| 1873 | |
| 1874 | "Documentation": { |
| 1875 | "Description": "A temperature sensor exceeded its warning threshold.", |
| 1876 | "Message": "A temperature sensor exceeded its warning threshold.", |
| 1877 | "Notes": [ |
| 1878 | "A temperature sensor crossed its warning threshold value", |
| 1879 | "If it is the ambient sensor, then a symbolic FRU will be added.", |
| 1880 | "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add", |
| 1881 | "a FRU callout." |
| 1882 | ] |
| 1883 | } |
| 1884 | }, |
| 1885 | |
| 1886 | { |
| 1887 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureWarningHighClear", |
| 1888 | "Subsystem": "power", |
| 1889 | "ComponentID": "0x2800", |
| 1890 | "Severity": "non_error", |
| 1891 | "ActionFlags": ["report"], |
| 1892 | "EventType": "env_normal", |
| 1893 | |
| 1894 | "SRC": { |
| 1895 | "ReasonCode": "0x2804", |
| 1896 | "Words6To9": {} |
| 1897 | }, |
| 1898 | |
| 1899 | "CalloutsUsingAD": { |
| 1900 | "ADName": "SENSOR_NAME", |
| 1901 | "CalloutsWithTheirADValues": [ |
| 1902 | { |
| 1903 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 1904 | "Callouts": [ |
| 1905 | { |
| 1906 | "CalloutList": [ |
| 1907 | { "Priority": "high", "SymbolicFRU": "ambient_temp_back" } |
| 1908 | ] |
| 1909 | } |
| 1910 | ] |
| 1911 | } |
| 1912 | ] |
| 1913 | }, |
| 1914 | |
| 1915 | "Documentation": { |
| 1916 | "Description": "A temperature sensor is under its warning threshold.", |
| 1917 | "Message": "A temperature sensor is under its warning threshold.", |
| 1918 | "Notes": [ |
| 1919 | "A temperature sensor crossed under its warning threshold value", |
| 1920 | "If it is the ambient sensor, then a symbolic FRU will be added." |
| 1921 | ] |
| 1922 | } |
| 1923 | }, |
| 1924 | |
| 1925 | { |
| 1926 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHigh", |
| 1927 | "Subsystem": "power", |
| 1928 | "ComponentID": "0x2800", |
| 1929 | "Severity": "predictive", |
| 1930 | "ActionFlags": ["service_action", "report"], |
| 1931 | |
| 1932 | "SRC": { |
| 1933 | "ReasonCode": "0x2805", |
| 1934 | "Words6To9": {} |
| 1935 | }, |
| 1936 | |
| 1937 | "CalloutsUsingAD": { |
| 1938 | "ADName": "SENSOR_NAME", |
| 1939 | "CalloutsWithTheirADValues": [ |
| 1940 | { |
| 1941 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 1942 | "Callouts": [ |
| 1943 | { |
| 1944 | "CalloutList": [ |
| 1945 | { "Priority": "high", "SymbolicFRU": "ambient_temp" } |
| 1946 | ] |
| 1947 | } |
| 1948 | ] |
| 1949 | } |
| 1950 | ] |
| 1951 | }, |
| 1952 | |
| 1953 | "Documentation": { |
| 1954 | "Description": "A temperature sensor exceeded its critical threshold.", |
| 1955 | "Message": "A temperature sensor exceeded its critical threshold.", |
| 1956 | "Notes": [ |
| 1957 | "A temperature sensor crossed its critical threshold value", |
| 1958 | "If it is the ambient sensor, then a symbolic FRU will be added.", |
| 1959 | "Otherwise, CALLOUT_INVENTORY_PATH will be passed in to add", |
| 1960 | "a FRU callout." |
| 1961 | ] |
| 1962 | } |
| 1963 | }, |
| 1964 | |
| 1965 | { |
| 1966 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.TemperatureCriticalHighClear", |
| 1967 | "Subsystem": "power", |
| 1968 | "ComponentID": "0x2800", |
| 1969 | "Severity": "non_error", |
| 1970 | "ActionFlags": ["report"], |
| 1971 | "EventType": "env_normal", |
| 1972 | |
| 1973 | "SRC": { |
| 1974 | "ReasonCode": "0x2806", |
| 1975 | "Words6To9": {} |
| 1976 | }, |
| 1977 | |
| 1978 | "CalloutsUsingAD": { |
| 1979 | "ADName": "SENSOR_NAME", |
| 1980 | "CalloutsWithTheirADValues": [ |
| 1981 | { |
| 1982 | "ADValue": "/xyz/openbmc_project/sensors/temperature/Ambient_Virtual_Temp", |
| 1983 | "Callouts": [ |
| 1984 | { |
| 1985 | "CalloutList": [ |
| 1986 | { "Priority": "high", "SymbolicFRU": "ambient_temp_back" } |
| 1987 | ] |
| 1988 | } |
| 1989 | ] |
| 1990 | } |
| 1991 | ] |
| 1992 | }, |
| 1993 | |
| 1994 | "Documentation": { |
| 1995 | "Description": "A temperature sensor is under its critical threshold.", |
| 1996 | "Message": "A temperature sensor is under its critical threshold.", |
| 1997 | "Notes": [ |
| 1998 | "A temperature sensor crossed under its critical threshold value", |
| 1999 | "If it is the ambient sensor, then a symbolic FRU will be added." |
| 2000 | ] |
| 2001 | } |
| 2002 | }, |
| 2003 | |
| 2004 | { |
Matt Spinler | 6b3490a | 2021-01-20 10:48:26 -0600 | [diff] [blame] | 2005 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHigh", |
| 2006 | "Subsystem": "power", |
| 2007 | "ComponentID": "0x2800", |
| 2008 | "Severity": "predictive", |
| 2009 | "ActionFlags": ["service_action", "report"], |
| 2010 | |
| 2011 | "SRC": { |
| 2012 | "ReasonCode": "0x2807", |
| 2013 | "Words6To9": {} |
| 2014 | }, |
| 2015 | |
| 2016 | "Callouts": [ |
| 2017 | { |
| 2018 | "CalloutList": [ |
| 2019 | { |
| 2020 | "Priority": "high", |
| 2021 | "SymbolicFRU": "ambient_temp" |
| 2022 | } |
| 2023 | ] |
| 2024 | } |
| 2025 | ], |
| 2026 | |
| 2027 | "Documentation": { |
| 2028 | "Description": "The ambient temperature passed the EPOW3 limit.", |
| 2029 | "Message": "The ambient temperature passed the EPOW3 limit. The system will shut down if temp doesn't decrease.", |
| 2030 | "Notes": [ |
| 2031 | "This error occurs when the ambient temperature surpassed", |
| 2032 | "the EPOW3 shutdown limit." |
| 2033 | ] |
| 2034 | } |
| 2035 | }, |
| 2036 | |
| 2037 | { |
| 2038 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.SoftShutdownAlarmHighClear", |
| 2039 | "Subsystem": "power", |
| 2040 | "ComponentID": "0x2800", |
| 2041 | "Severity": "non_error", |
| 2042 | "ActionFlags": ["report"], |
| 2043 | "EventType": "env_normal", |
| 2044 | |
| 2045 | "SRC": { |
| 2046 | "ReasonCode": "0x2808", |
| 2047 | "Words6To9": {} |
| 2048 | }, |
| 2049 | |
| 2050 | "Callouts": [ |
| 2051 | { |
| 2052 | "CalloutList": [ |
| 2053 | { |
| 2054 | "Priority": "high", |
| 2055 | "SymbolicFRU": "ambient_temp_back" |
| 2056 | } |
| 2057 | ] |
| 2058 | } |
| 2059 | ], |
| 2060 | |
| 2061 | "Documentation": { |
| 2062 | "Description": "The ambient temperature is back under the EPOW3 limit.", |
| 2063 | "Message": "The ambient temperature is back under the EPOW3 limit." |
| 2064 | } |
| 2065 | }, |
| 2066 | |
| 2067 | { |
| 2068 | "Name": "xyz.openbmc_project.Sensor.Threshold.Error.HardShutdownAlarmHigh", |
| 2069 | "Subsystem": "power", |
| 2070 | "ComponentID": "0x2800", |
Matt Spinler | 6b3490a | 2021-01-20 10:48:26 -0600 | [diff] [blame] | 2071 | "ActionFlags": ["service_action", "report"], |
| 2072 | |
| 2073 | "SRC": { |
| 2074 | "ReasonCode": "0x2809", |
| 2075 | "Words6To9": {} |
| 2076 | }, |
| 2077 | |
| 2078 | "Callouts": [ |
| 2079 | { |
| 2080 | "CalloutList": [ |
| 2081 | { |
| 2082 | "Priority": "high", |
| 2083 | "SymbolicFRU": "ambient_temp" |
| 2084 | } |
| 2085 | ] |
| 2086 | } |
| 2087 | ], |
| 2088 | |
| 2089 | "Documentation": { |
| 2090 | "Description": "The ambient temperature passed the EPOW4 limit.", |
| 2091 | "Message": "The ambient temperature passed the EPOW4 limit. The system will shut down", |
| 2092 | "Notes": [ |
| 2093 | "This error occurs when the ambient temperature surpassed", |
| 2094 | "the EPOW4 shutdown limit." |
| 2095 | ] |
| 2096 | } |
| 2097 | }, |
| 2098 | |
| 2099 | { |
SunnySrivastava1984 | 1ec60ea | 2020-09-03 07:07:25 -0500 | [diff] [blame] | 2100 | "Name": "com.ibm.VPD.Error.InvalidEepromPath", |
| 2101 | "Subsystem": "cec_vpd", |
| 2102 | "ComponentID": "0x4000", |
| 2103 | |
| 2104 | "SRC": { |
| 2105 | "ReasonCode": "0x4000", |
| 2106 | "Words6To9": |
| 2107 | { |
| 2108 | "6": |
| 2109 | { |
| 2110 | "Description": "Errno of the failure.", |
| 2111 | "AdditionalDataPropSource": "CALLOUT_ERRNO" |
| 2112 | } |
| 2113 | } |
| 2114 | }, |
| 2115 | |
| 2116 | "Documentation": { |
| 2117 | "Description": "A path access error ocurred", |
| 2118 | "Message": "An EEPROM path access error occurred.", |
| 2119 | "Notes": [ |
| 2120 | "This error occurs when parser is unable to access", |
| 2121 | "EEPROM path. Errno and device path are captured as", |
| 2122 | "additional data." |
| 2123 | ] |
| 2124 | } |
| 2125 | }, |
| 2126 | |
| 2127 | { |
| 2128 | "Name": "com.ibm.VPD.Error.InvalidVPD", |
| 2129 | "Subsystem": "cec_vpd", |
| 2130 | "ComponentID": "0x4000", |
| 2131 | |
| 2132 | "SRC": { |
| 2133 | "ReasonCode": "0x4001", |
| 2134 | "Words6To9": |
| 2135 | { |
| 2136 | } |
| 2137 | }, |
| 2138 | |
| 2139 | "Documentation": { |
| 2140 | "Description": "Invalid VPD data.", |
| 2141 | "Message": "A VPD data exception occurred.", |
| 2142 | "Notes": [ |
| 2143 | "This error occurs when VPD data is found to be", |
| 2144 | "invalid. This can be when VPD file is missing out", |
| 2145 | "mandatory records.Inventory path is captured in", |
| 2146 | "additional data." |
| 2147 | ] |
| 2148 | } |
| 2149 | }, |
| 2150 | |
| 2151 | { |
| 2152 | "Name": "com.ibm.VPD.Error.EccCheckFailed", |
| 2153 | "Subsystem": "cec_vpd", |
| 2154 | "ComponentID": "0x4000", |
| 2155 | |
| 2156 | "SRC": { |
| 2157 | "ReasonCode": "0x4002", |
| 2158 | "Words6To9": |
| 2159 | { |
| 2160 | } |
| 2161 | }, |
| 2162 | |
| 2163 | "Documentation": { |
| 2164 | "Description": "Invalid VPD ecc data.", |
| 2165 | "Message": "A VPD ecc exception occurred.", |
| 2166 | "Notes": [ |
| 2167 | "This error occurs when VPD ecc check fails for the FRU.", |
| 2168 | "Inventory path for the failed FRU is captured in additonal", |
| 2169 | "data." |
| 2170 | ] |
| 2171 | } |
| 2172 | }, |
| 2173 | |
| 2174 | { |
| 2175 | "Name": "com.ibm.VPD.Error.InvalidJson", |
| 2176 | "Subsystem": "cec_vpd", |
| 2177 | "ComponentID": "0x4000", |
| 2178 | |
| 2179 | "SRC": { |
| 2180 | "ReasonCode": "0x4003", |
| 2181 | "Words6To9": |
| 2182 | { |
| 2183 | } |
| 2184 | }, |
| 2185 | |
| 2186 | "Documentation": { |
| 2187 | "Description": "Invalid Json", |
| 2188 | "Message": "A Json failure occurred.", |
| 2189 | "Notes": [ |
| 2190 | "This error occurs when parser fails to access", |
| 2191 | "Json file or there is any issue with Json data.", |
| 2192 | "Failed Json path and cause of failure is captured", |
| 2193 | "in additional data." |
| 2194 | ] |
| 2195 | } |
| 2196 | }, |
| 2197 | |
| 2198 | { |
| 2199 | "Name": "com.ibm.VPD.Error.BlankSystemVPD", |
| 2200 | "Subsystem": "cec_vpd", |
| 2201 | "ComponentID": "0x4000", |
| 2202 | |
| 2203 | "SRC": { |
| 2204 | "ReasonCode": "0x4004", |
| 2205 | "Words6To9": |
| 2206 | { |
| 2207 | } |
| 2208 | }, |
| 2209 | |
| 2210 | "Documentation": { |
| 2211 | "Description": "System VPD restore failed", |
| 2212 | "Message": "A system VPD restoration error occurred.", |
| 2213 | "Notes": [ |
| 2214 | "This error occurs when restoring of system VPD fails.", |
| 2215 | "The FRU path and reason for failure is captured in", |
| 2216 | "additional data." |
| 2217 | ] |
| 2218 | } |
| 2219 | }, |
| 2220 | |
| 2221 | { |
| 2222 | "Name": "com.ibm.VPD.Error.DbusFailure", |
| 2223 | "Subsystem": "cec_vpd", |
| 2224 | "ComponentID": "0x4000", |
| 2225 | |
| 2226 | "SRC": { |
| 2227 | "ReasonCode": "0x4005", |
| 2228 | "Words6To9": |
| 2229 | { |
| 2230 | } |
| 2231 | }, |
| 2232 | |
| 2233 | "Documentation": { |
| 2234 | "Description": "Dbus exception", |
| 2235 | "Message": "A Dbus internal error occurred.", |
| 2236 | "Notes": [ |
| 2237 | "This error occurs when Dbus operation fails.", |
| 2238 | "Exceptions details are captured in additonal", |
| 2239 | "data." |
| 2240 | ] |
| 2241 | } |
Matt Spinler | 3fd08d6 | 2019-10-22 14:25:33 -0500 | [diff] [blame] | 2242 | } |
Matt Spinler | 44792fd | 2019-09-26 15:58:58 -0500 | [diff] [blame] | 2243 | ] |
| 2244 | } |