tree a32ab8db314eb91a2d833dafd7f6de9e4cf9d09c
parent 2528dfbdfdac5e0167d6529a25ee12b556577e1a
author Connie Yin <conniey@ami.com> 1645208906 -0500
committer Connie Yin <conniey@ami.com> 1645568098 -0500

Fix calling sol info command immediately after sol set command issue

Problem:
ipmitool sol info command doesn't reflect the value set by ipmitool sol set command after being called consecutively after ipmitool sol set command

Root Cause:
Lack of updating the latest dbus property value to sol mananger

Solution:
Add updateSOLParameter() method in getConfParams() function.

Test:

ipmitool -I lanplus -H BMC-IP -U BMC-user -P BMC-password -C 17 sol info
Info: SOL parameter 'Nonvolatile Bitrate (5)' not supported
Info: SOL parameter 'Volatile Bitrate (6)' not supported
Set in progress                 : set-complete
Enabled                         : true
Force Encryption                : true
Privilege Level                 : USER
Character Accumulate Level (ms) : 100
Character Send Threshold        : 1
Retry Count                     : 7
Retry Interval (ms)             : 100
Volatile Bit Rate (kbps)        : IPMI-Over-Serial-Setting
Non-Volatile Bit Rate (kbps)    : IPMI-Over-Serial-Setting
Payload Channel                 : 1 (0x01)
Payload Port                    : 623

ipmitool -I lanplus -H BMC-IP -U BMC-user -P BMC-password -C 17 sol set character-accumulate-level 0x5

ipmitool -I lanplus -H BMC-IP -U BMC-user -P BMC-password -C 17 sol info
Info: SOL parameter 'Nonvolatile Bitrate (5)' not supported
Info: SOL parameter 'Volatile Bitrate (6)' not supported
Set in progress                 : set-complete
Enabled                         : true
Force Encryption                : true
Force Authentication            : true
Privilege Level                 : USER
Character Accumulate Level (ms) : 25
Character Send Threshold        : 1
Retry Count                     : 7
Retry Interval (ms)             : 100
Volatile Bit Rate (kbps)        : IPMI-Over-Serial-Setting
Non-Volatile Bit Rate (kbps)    : IPMI-Over-Serial-Setting
Payload Channel                 : 1 (0x01)

Character Accumulate Level (ms) = 25ms = character-accumulate-leverl * accIntervalFactor = 5 * 5

Signed-off-by: Connie Yin <conniey@ami.com>
Change-Id: I987c2f36492418e70dedf4c4f6448821f3c95f79