Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-net-ipmid / f6e7230d9cd45772a4237c024e6c3abf9b4cf7eb
commitf6e7230d9cd45772a4237c024e6c3abf9b4cf7eb[log] [tgz]
authorsrikanta mondal <srikantax.mondal@intel.com>Mon Jun 08 12:46:28 2020 +0000
committersrikanta mondal <srikantax.mondal@intel.com>Mon Aug 03 15:45:06 2020 +0000
tree22763497b5191933b72c1c0f0cccb7e7af830ffe
parentecb32fbc699aaacee4d6a42bb986575c4c5780dc [diff]
Close active SOL session after disable SSH SOL

Issue: When SOL-SSH is being disable by Control BMC service command,
       the active SOL session are not being closed.

Fix: Stop the Payload Instance and Host console for active SOL
     session when SSH SOL is being disable.

Tested:
Verified using ipmitool sol commands.
1. Enable SSH SOL using control BMC service command
Command: ipmitool raw 0x30 0xb1 0x01 0x40 0x00  //SOL activate
Response:                           // Success
Check the status using below busctl command
command: busctl introspect xyz.openbmc_project.Control.Service.Manager
         /xyz/openbmc_project/control/service/obmc_2dconsole_40ttyS2
Response: .Enabled    true
2. Activate SOL session
Command: ipmitool -I lanplus -U root -P 0penBmc -H <BMC_IP> -C 17
         sol activate
Response:                         // Success
3. Disable SSH SOL using control BMC service command
Command: ipmitool raw 0x30 0xb1 0x00 0x40 0x00
Response:                                    // Success
Check the status using below busctl command
command: busctl introspect xyz.openbmc_project.Control.Service.Manager
         /xyz/openbmc_project/control/service/obmc_2dconsole_40ttyS2
Response: .Enabled    false
4.  Enable SSH SOL using control BMC service command.
Command: ipmitool raw 0x30 0xb1 0x01 0x40 0x00
Response:                                // Success
Check the status using below busctl command
command: busctl introspect xyz.openbmc_project.Control.Service.Manager
         /xyz/openbmc_project/control/service/obmc_2dconsole_40ttyS2
Response: .Enabled    true
5. Activate SOL session
Command: ipmitool -I lanplus -U root -P 0penBmc -H <BMC_IP> -C 17
         sol activate
Response:               // Successfully establish the session

Signed-off-by: srikanta mondal <srikantax.mondal@intel.com>
Change-Id: I08a459e5a4245d969529c033e4b88625b0796fb2
2 files changed
tree: 22763497b5191933b72c1c0f0cccb7e7af830ffe
  1. command/
  2. sol/
  3. test/
  4. .clang-format
  5. .gitignore
  6. auth_algo.cpp
  7. auth_algo.hpp
  8. bootstrap.sh
  9. comm_module.cpp
  10. comm_module.hpp
  11. command_table.cpp
  12. command_table.hpp
  13. configure.ac
  14. crypt_algo.cpp
  15. crypt_algo.hpp
  16. endian.hpp
  17. integrity_algo.cpp
  18. integrity_algo.hpp
  19. LICENSE
  20. main.cpp
  21. main.hpp
  22. MAINTAINERS
  23. Makefile.am
  24. message.hpp
  25. message_handler.cpp
  26. message_handler.hpp
  27. message_parsers.cpp
  28. message_parsers.hpp
  29. phosphor-ipmi-net@.service
  30. phosphor-ipmi-net@.socket
  31. prng.hpp
  32. README.md
  33. rmcp.hpp
  34. sd_event_loop.cpp
  35. sd_event_loop.hpp
  36. session.hpp
  37. sessions_manager.cpp
  38. sessions_manager.hpp
  39. socket_channel.hpp
  40. sol_module.cpp
  41. sol_module.hpp
README.md

To Build

To build this package, do the following steps:

    1. ./bootstrap.sh
    2. ./configure ${CONFIGURE_FLAGS}
    3. make

To clean the repository run `./bootstrap.sh clean`.