tree af99cb39055ab74073cfcd52c24fb02136ef5ace
parent cc099a855ab517deb563ceb6821a8a414362132e
author Manojkiran Eda <manojkiran.eda@gmail.com> 1590638322 +0530
committer ManojKiran Eda <manojkiran.eda@gmail.com> 1592815073 +0000

Fix to set ipaddress on VLAN

- d0679f9bb46670c593061c4aaebec2a577cdd5c3 commit has introduced a
  boolean property nICEnabled() to check if the corresponding
  interface is enabled.

- As this property has not been passed down to VLAN interface, the
  `Unmanaged=yes` is being set in the VLAN network configuration file
  beacuse of which the ipaddress objects for VLAN are not being
  populated.

Tested By:
==========

1. Create new VLAN

-XPOST -H "Content-type: application/json" -d '{"data": ["eth0",50]}'
 httpsbmcip://<>/xyz/openbmc_project/network/action/VLAN

2. Set an IP address on the VLAN interface and make sure the ip address
   is being populated in the Network Configuration file and also make
   sure that the vlan interface is now managed.

-XPOST -H "Content-type: application/json" -d
'{"data": ["xyz.openbmc_project.Network.IP.Protocol.IPv4","10.6.6.10",24,"0.0.0.0"] }'
 https://<bmcip>/xyz/openbmc_project/network/eth0_50/action/IP

3. Enumerate the VLAN Interface to check if it populates the above set
   ip address of the VLAN interface as well.

-X GET https://<bmcip>/xyz/openbmc_project/network/eth0_50/enumerate

4. Create a VLAN(1),set an IP(2) then disable the VLAN using the busctl
   call on the NICEnabled Property, and restart the network service and
   make sure the VLAN comes back disabled.

Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I892a8c1c1126631a494d42656eeb5be47b4e5bd4