The OEM IPMI interface for status
This lets one get/set various aspects of the control daemon,
including whether it's fallen into fail-safe mode, or whether a
zone is in manual mode. Manual mode in this implementation is
zone specific and not fan specific.
Change-Id: I1611fefad198b64c28a780073674896d6efbf877
Signed-off-by: Patrick Venture <venture@google.com>
diff --git a/ipmi/README b/ipmi/README
new file mode 100644
index 0000000..8bf37cf
--- /dev/null
+++ b/ipmi/README
@@ -0,0 +1,13 @@
+This holds the source for the library we install to handle the manual control
+OEM IPMI command.
+
+The command is a simple series of bytes:
+[0] = Subcommand, Get(0) or Set(1), Get(2) for fail-safe mode.
+[1] = ZoneId
+[2] = Value if Set
+
+If Value == 1, then ManualMode is True and enabled, otherwise it's in normal
+mode.
+
+If Value == 1 (and Subcommand == 2), Failsafe mode is enabled, otherwise it's
+not.
diff --git a/ipmi/manualcmds.cpp b/ipmi/manualcmds.cpp
new file mode 100644
index 0000000..2d2d53b
--- /dev/null
+++ b/ipmi/manualcmds.cpp
@@ -0,0 +1,256 @@
+/**
+ * Copyright 2017 Google Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//#include <stdint.h>
+
+#include <map>
+#include <string>
+#include <tuple>
+
+#include <sdbusplus/bus.hpp>
+#include <sdbusplus/message.hpp>
+
+#include "host-ipmid/ipmid-api.h"
+#include "host-ipmid/oemopenbmc.hpp"
+#include "host-ipmid/oemrouter.hpp"
+
+enum ManualSubCmd
+{
+ GET_CONTROL_STATE = 0,
+ SET_CONTROL_STATE = 1,
+ GET_FAILSAFE_STATE = 2,
+};
+
+struct FanCtrlRequest {
+ uint8_t command;
+ uint8_t zone;
+} __attribute__((packed));
+
+struct FanCtrlRequestSet {
+ uint8_t command;
+ uint8_t zone;
+ uint8_t value;
+} __attribute__((packed));
+
+static constexpr auto objectPath = "/xyz/openbmc_project/settings/fanctrl/zone";
+static constexpr auto busName = "xyz.openbmc_project.State.FanCtrl";
+static constexpr auto intf = "xyz.openbmc_project.Control.FanCtrl.Mode";
+static constexpr auto manualProperty = "Manual";
+static constexpr auto failsafeProperty = "FailSafe";
+static constexpr auto propertiesintf = "org.freedesktop.DBus.Properties";
+
+using Property = std::string;
+using Value = sdbusplus::message::variant<bool>;
+using PropertyMap = std::map<Property, Value>;
+
+/* The following was copied directly from my manual thread handler. */
+static std::string GetControlPath(int8_t zone)
+{
+ return std::string(objectPath) + std::to_string(zone);
+}
+
+/*
+ * busctl call xyz.openbmc_project.State.FanCtrl \
+ * /xyz/openbmc_project/settings/fanctrl/zone1 \
+ * org.freedesktop.DBus.Properties \
+ * GetAll \
+ * s \
+ * xyz.openbmc_project.Control.FanCtrl.Mode
+ * a{sv} 2 "Manual" b false "FailSafe" b false
+ */
+
+static ipmi_ret_t
+GetFanCtrlProperty(uint8_t zoneId, bool *value, const std::string &property)
+{
+ std::string path = GetControlPath(zoneId);
+
+ auto propertyReadBus = sdbusplus::bus::new_default();
+ auto pimMsg = propertyReadBus.new_method_call(busName,
+ path.c_str(),
+ propertiesintf,
+ "GetAll");
+ pimMsg.append(intf);
+
+ auto valueResponseMsg = propertyReadBus.call(pimMsg);
+ if (valueResponseMsg.is_method_error())
+ {
+ return IPMI_CC_INVALID;
+ }
+
+ PropertyMap propMap;
+ valueResponseMsg.read(propMap);
+
+ if (propMap.size() != 2)
+ {
+ return IPMI_CC_INVALID;
+ }
+
+ *value = sdbusplus::message::variant_ns::get<bool>(propMap[property]);
+
+ return IPMI_CC_OK;
+}
+
+static ipmi_ret_t
+GetFailsafeModeState(const uint8_t* reqBuf, uint8_t* replyBuf, size_t* dataLen)
+{
+ ipmi_ret_t rc = IPMI_CC_OK;
+ bool current;
+
+ if (*dataLen < sizeof(struct FanCtrlRequest))
+ {
+ return IPMI_CC_INVALID;
+ }
+
+ const auto request =
+ reinterpret_cast<const struct FanCtrlRequest*>(&reqBuf[0]);
+
+ rc = GetFanCtrlProperty(request->zone, ¤t, failsafeProperty);
+ if (rc)
+ {
+ return rc;
+ }
+
+ *replyBuf = (uint8_t)current;
+ *dataLen = sizeof(uint8_t);
+ return rc;
+}
+
+/*
+ * <method name="GetAll">
+ * <arg name="interface" direction="in" type="s"/>
+ * <arg name="properties" direction="out" type="a{sv}"/>
+ * </method>
+ */
+static ipmi_ret_t
+GetManualModeState(const uint8_t* reqBuf, uint8_t* replyBuf, size_t* dataLen)
+{
+ ipmi_ret_t rc = IPMI_CC_OK;
+ bool current;
+
+ if (*dataLen < sizeof(struct FanCtrlRequest))
+ {
+ return IPMI_CC_INVALID;
+ }
+
+ const auto request =
+ reinterpret_cast<const struct FanCtrlRequest*>(&reqBuf[0]);
+
+ rc = GetFanCtrlProperty(request->zone, ¤t, manualProperty);
+ if (rc)
+ {
+ return rc;
+ }
+
+ *replyBuf = (uint8_t)current;
+ *dataLen = sizeof(uint8_t);
+ return rc;
+}
+
+/*
+ * <method name="Set">
+ * <arg name="interface" direction="in" type="s"/>
+ * <arg name="property" direction="in" type="s"/>
+ * <arg name="value" direction="in" type="v"/>
+ * </method>
+ */
+static ipmi_ret_t
+SetManualModeState(const uint8_t* reqBuf, uint8_t* replyBuf, size_t* dataLen)
+{
+ ipmi_ret_t rc = IPMI_CC_OK;
+ if (*dataLen < sizeof(struct FanCtrlRequestSet))
+ {
+ return IPMI_CC_INVALID;
+ }
+
+ using Value = sdbusplus::message::variant<bool>;
+
+ const auto request =
+ reinterpret_cast<const struct FanCtrlRequestSet*>(&reqBuf[0]);
+
+ /* 0 is false, 1 is true */
+ bool setValue = static_cast<bool>(request->value);
+ Value v {setValue};
+
+ auto PropertyWriteBus = sdbusplus::bus::new_default();
+
+ std::string path = GetControlPath(request->zone);
+
+ auto pimMsg = PropertyWriteBus.new_method_call(busName,
+ path.c_str(),
+ propertiesintf,
+ "Set");
+ pimMsg.append(intf);
+ pimMsg.append(manualProperty);
+ pimMsg.append(v);
+ auto responseMsg = PropertyWriteBus.call(pimMsg);
+ if (responseMsg.is_method_error())
+ {
+ rc = IPMI_CC_INVALID;
+ }
+ /* TODO(venture): Should sanity check the result. */
+
+ return rc;
+}
+
+/* Three command packages: get, set true, set false */
+static ipmi_ret_t
+ManualModeControl(
+ ipmi_cmd_t cmd,
+ const uint8_t* reqBuf,
+ uint8_t* replyCmdBuf,
+ size_t* dataLen)
+{
+ ipmi_ret_t rc = IPMI_CC_OK;
+ // FanCtrlRequest is the smaller of the requests, so it's at a minimum.
+ if (*dataLen < sizeof(struct FanCtrlRequest))
+ {
+ return IPMI_CC_INVALID;
+ }
+
+ const auto request =
+ reinterpret_cast<const struct FanCtrlRequest*>(&reqBuf[0]);
+
+ switch (request->command)
+ {
+ case GET_CONTROL_STATE:
+ return GetManualModeState(reqBuf, replyCmdBuf, dataLen);
+ case SET_CONTROL_STATE:
+ return SetManualModeState(reqBuf, replyCmdBuf, dataLen);
+ case GET_FAILSAFE_STATE:
+ return GetFailsafeModeState(reqBuf, replyCmdBuf, dataLen);
+ default:
+ rc = IPMI_CC_INVALID;
+ }
+
+ return rc;
+}
+
+void setupGlobalOemFanControl() __attribute__((constructor));
+
+void setupGlobalOemFanControl()
+{
+ ipmid::OemRouter* oemRouter = ipmid::mutableOemRouter();
+
+ fprintf(stderr,
+ "Registering OEM:[%#08X], Cmd:[%#04X] for Manual Zone Control\n",
+ ipmid::oem::openbmc::obmcOemNumber,
+ ipmid::oem::openbmc::OemCmd::fanManualCmd);
+
+ oemRouter->registerHandler(
+ ipmid::oem::openbmc::obmcOemNumber,
+ ipmid::oem::openbmc::OemCmd::fanManualCmd,
+ ManualModeControl);
+}
diff --git a/ipmi/manualcmds.hpp b/ipmi/manualcmds.hpp
new file mode 100644
index 0000000..3f59c93
--- /dev/null
+++ b/ipmi/manualcmds.hpp
@@ -0,0 +1,2 @@
+#pragma once
+