diff --git a/README.md b/README.md
index 3395055..18c89f4 100644
--- a/README.md
+++ b/README.md
@@ -103,8 +103,8 @@
     ipmi:
       {IPMI_ID}
       name: "fan1"
-      readpath: "/xyz/openbmc_project/sensors/fan_tach/fan1"
-      writepath: "/sys/class/hwmon/hwmon0/pwm0"
+      readPath: "/xyz/openbmc_project/sensors/fan_tach/fan1"
+      writePath: "/sys/class/hwmon/hwmon0/pwm0"
     pidinfo:
       samplerate: 0.1 // sample time in seconds
       p_coeff: 0.01 // coefficient for proportional
@@ -122,8 +122,8 @@
     ipmi:
       {IPMI_ID}
       name: "sluggish0"
-      readpath: "/xyz/openbmc_project/sensors/external/sluggish0"
-      writepath: ""
+      readPath: "/xyz/openbmc_project/sensors/external/sluggish0"
+      writePath: ""
     pidinfo:
       samplerate: 1 // sample time in seconds
       p_coeff: 94.0
diff --git a/conf.hpp b/conf.hpp
index c5734cc..cfea278 100644
--- a/conf.hpp
+++ b/conf.hpp
@@ -12,11 +12,11 @@
  */
 struct SensorConfig
 {
-    /* Used for listen if readpath is passive. */
+    /* Used for listen if readPath is passive. */
     std::string type;
     /* Can be a sensor path or a dbus path. */
-    std::string readpath;
-    std::string writepath;
+    std::string readPath;
+    std::string writePath;
     /* min/max values for writing a percentage or error checking. */
     int64_t min;
     int64_t max;
diff --git a/dbus/dbusconfiguration.cpp b/dbus/dbusconfiguration.cpp
index 0045822..e4396c4 100644
--- a/dbus/dbusconfiguration.cpp
+++ b/dbus/dbusconfiguration.cpp
@@ -80,8 +80,8 @@
 
         std::cout << "\t{" << pair.first << ",\n\t\t{";
         std::cout << pair.second.type << ", ";
-        std::cout << pair.second.readpath << ", ";
-        std::cout << pair.second.writepath << ", ";
+        std::cout << pair.second.readPath << ", ";
+        std::cout << pair.second.writePath << ", ";
         std::cout << pair.second.min << ", ";
         std::cout << pair.second.max << ", ";
         std::cout << pair.second.timeout << "},\n\t},\n";
@@ -354,7 +354,7 @@
                         inputs.push_back(shortName);
                         auto& config = sensorConfig[shortName];
                         config.type = std::get<std::string>(base.at("Class"));
-                        config.readpath = sensorPathIfacePair.first;
+                        config.readPath = sensorPathIfacePair.first;
                         // todo: maybe un-hardcode this if we run into slower
                         // timeouts with sensors
                         if (config.type == "temp")
@@ -376,7 +376,7 @@
                             }
 
                             auto& config = sensorConfig[otherSensor];
-                            config.writepath = sensorPathIfacePair.first;
+                            config.writePath = sensorPathIfacePair.first;
                             // todo: un-hardcode this if there are fans with
                             // different ranges
                             config.max = 255;
@@ -481,7 +481,7 @@
 
                         inputs.push_back(shortName);
                         auto& config = sensorConfig[shortName];
-                        config.readpath = sensorPathIfacePair.first;
+                        config.readPath = sensorPathIfacePair.first;
                         config.type = "temp";
                         // todo: maybe un-hardcode this if we run into slower
                         // timeouts with sensors
diff --git a/examples/swampd.conf b/examples/swampd.conf
index c4fab5e..fd492ee 100644
--- a/examples/swampd.conf
+++ b/examples/swampd.conf
@@ -2,55 +2,55 @@
 sensors = (
   { name = "fan1"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan1"
-    writepath = "/sys/class/hwmon/hwmon0/pwm0"
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan1"
+    writePath = "/sys/class/hwmon/hwmon0/pwm0"
     min = 0
   { name = "fan2"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan2"
-    writepath = "/sys/class/hwmon/hwmon0/pwm1"
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan2"
+    writePath = "/sys/class/hwmon/hwmon0/pwm1"
     min = 0
     max = 255
     timeout = 0 },
   { name = "fan3"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan3"
-    writepath = "/sys/class/hwmon/hwmon0/pwm2"
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan3"
+    writePath = "/sys/class/hwmon/hwmon0/pwm2"
     min = 0
     max = 255
     timeout = 0 },
   { name = "fan4"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan4"
-    writepath = "/sys/class/hwmon/hwmon0/pwm3"
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan4"
+    writePath = "/sys/class/hwmon/hwmon0/pwm3"
     min = 0
     max = 255
     timeout = 0 },
   { name = "fan5"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan5"
-    writepath = ""
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan5"
+    writePath = ""
     min = 0
     max = 0
     timeout = 0 },
   { name = "fan6"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan6"
-    writepath = ""
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan6"
+    writePath = ""
     min = 0
     max = 0
     timeout = 0 },
   { name = "fan7"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan7"
-    writepath = ""
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan7"
+    writePath = ""
     min = 0
     max = 0
     timeout = 0 },
   { name = "fan8"
     type = "fan"
-    readpath = "/xyz/openbmc_project/sensors/fan_tach/fan8"
-    writepath = ""
+    readPath = "/xyz/openbmc_project/sensors/fan_tach/fan8"
+    writePath = ""
     min = 0
     max = 0
     timeout = 0 }
diff --git a/scripts/README b/scripts/README
index f884fc6..8695774 100644
--- a/scripts/README
+++ b/scripts/README
@@ -5,7 +5,7 @@
 accessor.  This provides read-only access to information.  The goal of the
 configuration is to specify how it can be read and if it's a fan, how the PID
 output can be written.  Initially there'll only be sysfs and passive dbus
-access.  If a writepath for a sensor is a dbus path, then the system will need
+access.  If a writePath for a sensor is a dbus path, then the system will need
 to verify which Control.Fan* interfaces is registered and send values to the
 Target property of that interface.
 
@@ -14,7 +14,7 @@
 fan PID control objects may not, and they can leave the fields as 0 & 0.
 
 The only requirement for a sensor is that it isn't writeonly.  Only fans are
-expected to have a writepath set, and in this current version non-fan sensors
+expected to have a writePath set, and in this current version non-fan sensors
 are assumed readonly. 
 
 The sensor names are unique across all zones.
diff --git a/scripts/sensor-example.txt b/scripts/sensor-example.txt
index 0915163..b1318b8 100644
--- a/scripts/sensor-example.txt
+++ b/scripts/sensor-example.txt
@@ -1,9 +1,9 @@
 fan2: /* Name of the sensor. */
   type: fan /* Type of sensor, fan, temp, margin */
   /* How the sensor can be read[1] */
-  readpath: /xyz/openbmc_project/sensors/fan_tach/fan2
+  readPath: /xyz/openbmc_project/sensors/fan_tach/fan2
   /* How the sensor can be set[2] */
-  writepath: /sys/class/hwmon/hwmon0/pwm1
+  writePath: /sys/class/hwmon/hwmon0/pwm1
   /* The minimum value used for scaling writes (int64) */
   min: 0
   /* The maximum value used for scaling writes (int64) */
@@ -13,7 +13,7 @@
    */
   timeout: 0
 
-[1] readpath has multiple options:
+[1] readPath has multiple options:
 * If it has "/xyz/openbmc_project/extsensors/" in it, it's an EXTERNAL or
   host-provided sensor.
 * If it has "/xyz/openbmc_project/" in it, it's a sensor whose value is
diff --git a/scripts/sensor-example.yaml b/scripts/sensor-example.yaml
index 7378bff..1debe3e 100644
--- a/scripts/sensor-example.yaml
+++ b/scripts/sensor-example.yaml
@@ -1,31 +1,31 @@
 fan2:
   type: fan
-  readpath: /xyz/openbmc_project/sensors/fan_tach/fan2
-  writepath: /sys/class/hwmon/hwmon0/pwm1
+  readPath: /xyz/openbmc_project/sensors/fan_tach/fan2
+  writePath: /sys/class/hwmon/hwmon0/pwm1
   min: 0
   max: 255
   timeout: 0
 
 fan6:
   type: fan
-  readpath: /xyz/openbmc_project/sensors/fan_tach/fan6
-  writepath:
+  readPath: /xyz/openbmc_project/sensors/fan_tach/fan6
+  writePath:
   min: 0
   max: 0
   timeout: 0
 
 temp1:
   type: temp
-  readpath: /xyz/openbmc_project/sensors/temperature/temp1
-  writepath: 
+  readPath: /xyz/openbmc_project/sensors/temperature/temp1
+  writePath: 
   min: 0
   max: 0
   timeout: 0
 
 sluggish0:
   type: margin
-  readpath: /xyz/openbmc_project/extsensors/margin/sluggish0
-  writepath:
+  readPath: /xyz/openbmc_project/extsensors/margin/sluggish0
+  writePath:
   min: 0
   max: 0
   timeout: 0
diff --git a/scripts/writesensor.mako.cpp b/scripts/writesensor.mako.cpp
index 70cd019..56e7965 100644
--- a/scripts/writesensor.mako.cpp
+++ b/scripts/writesensor.mako.cpp
@@ -12,8 +12,8 @@
    <%
            sensor = sensorDict[key]
            type = sensor["type"]
-           readpath = sensor["readpath"]
-           writepath = sensor.get("writepath", "")
+           readPath = sensor["readPath"]
+           writePath = sensor.get("writePath", "")
            min = sensor.get("min", 0)
            max = sensor.get("max", 0)
            # Presently only thermal inputs have their timeout
@@ -27,7 +27,7 @@
                timeout = sensor.get("timeout", 2)
    %>
     {"${key}",
-        {"${type}","${readpath}","${writepath}", ${min}, ${max}, ${timeout}},
+        {"${type}","${readPath}","${writePath}", ${min}, ${max}, ${timeout}},
     },
    % endif
 % endfor
diff --git a/sensors/builder.cpp b/sensors/builder.cpp
index 966a581..4ba1837 100644
--- a/sensors/builder.cpp
+++ b/sensors/builder.cpp
@@ -53,10 +53,10 @@
         const struct SensorConfig* info = &it.second;
 
         std::cerr << "Sensor: " << name << " " << info->type << " ";
-        std::cerr << info->readpath << " " << info->writepath << "\n";
+        std::cerr << info->readPath << " " << info->writePath << "\n";
 
-        IOInterfaceType rtype = getReadInterfaceType(info->readpath);
-        IOInterfaceType wtype = getWriteInterfaceType(info->writepath);
+        IOInterfaceType rtype = getReadInterfaceType(info->readPath);
+        IOInterfaceType wtype = getWriteInterfaceType(info->writePath);
 
         // fan sensors can be ready any way and written others.
         // fan sensors are the only sensors this is designed to write.
@@ -80,7 +80,7 @@
                 // These are a special case for read-only.
                 break;
             case IOInterfaceType::SYSFS:
-                ri = std::make_unique<SysFsRead>(info->readpath);
+                ri = std::make_unique<SysFsRead>(info->readPath);
                 break;
             default:
                 ri = std::make_unique<WriteOnly>();
@@ -95,11 +95,11 @@
                     if (info->max > 0)
                     {
                         wi = std::make_unique<SysFsWritePercent>(
-                            info->writepath, info->min, info->max);
+                            info->writePath, info->min, info->max);
                     }
                     else
                     {
-                        wi = std::make_unique<SysFsWrite>(info->writepath,
+                        wi = std::make_unique<SysFsWrite>(info->writePath,
                                                           info->min, info->max);
                     }
 
@@ -108,19 +108,19 @@
                     if (info->max > 0)
                     {
                         wi = DbusWritePercent::createDbusWrite(
-                            info->writepath, info->min, info->max, helper);
+                            info->writePath, info->min, info->max, helper);
                     }
                     else
                     {
                         wi = DbusWrite::createDbusWrite(
-                            info->writepath, info->min, info->max, helper);
+                            info->writePath, info->min, info->max, helper);
                     }
 
                     if (wi == nullptr)
                     {
                         throw SensorBuildException(
                             "Unable to create write dbus interface for path: " +
-                            info->writepath);
+                            info->writePath);
                     }
 
                     break;
@@ -137,19 +137,19 @@
         {
             // These sensors are read-only, but only for this application
             // which only writes to fan sensors.
-            std::cerr << info->type << " readpath: " << info->readpath << "\n";
+            std::cerr << info->type << " readPath: " << info->readPath << "\n";
 
             if (IOInterfaceType::EXTERNAL == rtype)
             {
                 std::cerr << "Creating HostSensor: " << name
-                          << " path: " << info->readpath << "\n";
+                          << " path: " << info->readPath << "\n";
 
                 /*
                  * The reason we handle this as a HostSensor is because it's
                  * not quite pluggable; but maybe it could be.
                  */
                 auto sensor = HostSensor::createTemp(
-                    name, info->timeout, hostSensorBus, info->readpath.c_str(),
+                    name, info->timeout, hostSensorBus, info->readPath.c_str(),
                     deferSignals);
                 mgmr.addSensor(info->type, name, std::move(sensor));
             }
diff --git a/sensors/builderconfig.cpp b/sensors/builderconfig.cpp
index 0c6ed68..5aa18bc 100644
--- a/sensors/builderconfig.cpp
+++ b/sensors/builderconfig.cpp
@@ -75,8 +75,8 @@
              */
             name = sensor.lookup("name").c_str();
             thisOne.type = sensor.lookup("type").c_str();
-            thisOne.readpath = sensor.lookup("readpath").c_str();
-            thisOne.writepath = sensor.lookup("writepath").c_str();
+            thisOne.readPath = sensor.lookup("readPath").c_str();
+            thisOne.writePath = sensor.lookup("writePath").c_str();
 
             /* TODO: Document why this is wonky.  The library probably doesn't
              * like int64_t
diff --git a/sensors/buildjson.cpp b/sensors/buildjson.cpp
index 4bf5ea7..d62edfd 100644
--- a/sensors/buildjson.cpp
+++ b/sensors/buildjson.cpp
@@ -26,17 +26,17 @@
 void from_json(const json& j, SensorConfig& s)
 {
     j.at("type").get_to(s.type);
-    j.at("readpath").get_to(s.readpath);
+    j.at("readPath").get_to(s.readPath);
 
-    /* The writepath field is optional in a configuration */
-    auto writepath = j.find("writepath");
-    if (writepath == j.end())
+    /* The writePath field is optional in a configuration */
+    auto writePath = j.find("writePath");
+    if (writePath == j.end())
     {
-        s.writepath = "";
+        s.writePath = "";
     }
     else
     {
-        j.at("writepath").get_to(s.writepath);
+        j.at("writePath").get_to(s.writePath);
     }
 
     /* The min field is optional in a configuration. */
diff --git a/test/sensors_json_unittest.cpp b/test/sensors_json_unittest.cpp
index 99ab3db..0e8ae71 100644
--- a/test/sensors_json_unittest.cpp
+++ b/test/sensors_json_unittest.cpp
@@ -27,8 +27,8 @@
         "sensors": [{
             "name": "fan1",
             "type": "fan",
-            "readpath": "/xyz/openbmc_project/sensors/fan_tach/fan1",
-            "writepath": "/sys/devices/platform/ahb/ahb:apb/1e786000.pwm-tacho-controller/hwmon/**/pwm1",
+            "readPath": "/xyz/openbmc_project/sensors/fan_tach/fan1",
+            "writePath": "/sys/devices/platform/ahb/ahb:apb/1e786000.pwm-tacho-controller/hwmon/**/pwm1",
             "min": 0,
             "max": 255
         }]
@@ -38,9 +38,9 @@
     auto output = buildSensorsFromJson(j2);
     EXPECT_EQ(1, output.size());
     EXPECT_EQ(output["fan1"].type, "fan");
-    EXPECT_EQ(output["fan1"].readpath,
+    EXPECT_EQ(output["fan1"].readPath,
               "/xyz/openbmc_project/sensors/fan_tach/fan1");
-    EXPECT_EQ(output["fan1"].writepath,
+    EXPECT_EQ(output["fan1"].writePath,
               "/sys/devices/platform/ahb/ahb:apb/1e786000.pwm-tacho-controller/"
               "hwmon/**/pwm1");
     EXPECT_EQ(output["fan1"].min, 0);
@@ -51,14 +51,14 @@
 
 TEST(SensorsFromJson, validateOptionalFields)
 {
-    // The writepath, min, max, timeout fields are optional.
+    // The writePath, min, max, timeout fields are optional.
 
     auto j2 = R"(
       {
         "sensors": [{
             "name": "fan1",
             "type": "fan",
-            "readpath": "/xyz/openbmc_project/sensors/fan_tach/fan1"
+            "readPath": "/xyz/openbmc_project/sensors/fan_tach/fan1"
         }]
       }
     )"_json;
@@ -66,9 +66,9 @@
     auto output = buildSensorsFromJson(j2);
     EXPECT_EQ(1, output.size());
     EXPECT_EQ(output["fan1"].type, "fan");
-    EXPECT_EQ(output["fan1"].readpath,
+    EXPECT_EQ(output["fan1"].readPath,
               "/xyz/openbmc_project/sensors/fan_tach/fan1");
-    EXPECT_EQ(output["fan1"].writepath, "");
+    EXPECT_EQ(output["fan1"].writePath, "");
     EXPECT_EQ(output["fan1"].min, 0);
     EXPECT_EQ(output["fan1"].max, 0);
     EXPECT_EQ(output["fan1"].timeout,
@@ -86,11 +86,11 @@
         "sensors": [{
             "name": "fan1",
             "type": "fan",
-            "readpath": "/xyz/openbmc_project/sensors/fan_tach/fan1"
+            "readPath": "/xyz/openbmc_project/sensors/fan_tach/fan1"
         }, {
             "name": "fan2",
             "type": "fan",
-            "readpath": "/xyz/openbmc_project/sensors/fan_tach/fan1"
+            "readPath": "/xyz/openbmc_project/sensors/fan_tach/fan1"
         }]
       }
     )"_json;