Introduce ignoreFailIfHostOff config setting
Some sensors only provide valid readings when the host is powered on.
This change introduces the `ignoreFailIfHostOff` configuration option to
differentiate between unavailable readings based on host state.
- Host OFF: Sensor unavailable is acceptable and will not be treated as
a failure.
- Host ON (running): Sensor unavailable is unexpected, and the failsafe
mode will be triggered.
This ensures that sensors dependent on host power state are handled
correctly without causing unnecessary failsafe triggers during host-off.
Tested on Catalina: failsafe mode is not triggered when the host is off.
- config.json example: add `ignoreFailIfHostOff` for sensors only
available when the host is on.
```
{
"sensors": [
......
{
"name": "HDDBOARD_SSD0_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/HDDBOARD_SSD0_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "HDDBOARD_SSD2_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/HDDBOARD_SSD2_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "PDB_P48V_HSC1_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/PDB_P48V_HSC1_TEMP_C",
"timeout": 0,
"ignoreDbusMinMax": true
},
{
"name": "PDB_VR_P12V_N1_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/PDB_VR_P12V_N1_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "PDB_VR_P12V_N2_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/PDB_VR_P12V_N2_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "IOB0_NIC0_OSFP_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/IOB0_NIC0_OSFP_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "IOB0_NIC1_OSFP_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/IOB0_NIC1_OSFP_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "IOB1_NIC0_OSFP_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/IOB1_NIC0_OSFP_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
{
"name": "IOB1_NIC1_OSFP_TEMP_C",
"type": "temp",
"readPath": "/xyz/openbmc_project/sensors/temperature/IOB1_NIC1_OSFP_TEMP_C",
"timeout": 0,
"ignoreFailIfHostOff": true,
"ignoreDbusMinMax": true
},
......
],
"zones": [
......
]
}
```
Change-Id: I5355c453ca3c6d918c197dcd2cc9119e471d615d
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
diff --git a/sensors/host.cpp b/sensors/host.cpp
index 0bf78e0..f388443 100644
--- a/sensors/host.cpp
+++ b/sensors/host.cpp
@@ -17,6 +17,7 @@
#include "host.hpp"
#include "failsafeloggers/failsafe_logger_utility.hpp"
+#include "hoststatemonitor.hpp"
#include "interfaces.hpp"
#include "sensor.hpp"
@@ -45,10 +46,10 @@
std::unique_ptr<Sensor> HostSensor::createTemp(
const std::string& name, int64_t timeout, sdbusplus::bus_t& bus,
- const char* objPath, bool defer)
+ const char* objPath, bool defer, bool ignoreFailIfHostOff)
{
- auto sensor =
- std::make_unique<HostSensor>(name, timeout, bus, objPath, defer);
+ auto sensor = std::make_unique<HostSensor>(name, timeout, bus, objPath,
+ defer, ignoreFailIfHostOff);
sensor->value(0);
// DegreesC and value of 0 are the defaults at present, therefore testing
@@ -112,6 +113,15 @@
return false;
}
+ if (getIgnoreFailIfHostOff())
+ {
+ auto& hostState = HostStateMonitor::getInstance();
+ if (!hostState.isPowerOn())
+ {
+ return false;
+ }
+ }
+
outputFailsafeLogWithSensor(getName(), true, getName(),
"The sensor has invalid readings.");
return true;