README: configure: fixup markdown
The tool used to write this implemented features not available in the
makrdown used by github. Therefore, this removes those features.
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I3a3eed1c8f298fe88f0ddbcb43aa897ec4d6f623
diff --git a/configure.md b/configure.md
index c6431ca..a027282 100644
--- a/configure.md
+++ b/configure.md
@@ -134,13 +134,8 @@
| field | type | meaning |
| ------------------ | --------- | ----------------------------------------- |
| `id` | `int64_t` | This is a unique identifier for the zone. |
-| `minThermalOutput` | `double` | This is the minimum value that should be |
-: : : considered from the thermal outputs. :
-: : : Commonly used as the minimum fan RPM. :
-| `failsafePercent` | `double` | If there is a fan PID, it will use this |
-: : : value if the zone goes into fail-safe as :
-: : : the output value written to the fan's :
-: : : sensors. :
+| `minThermalOutput` | `double` | This is the minimum value that should be considered from the thermal outputs. Commonly used as the minimum fan RPM.|
+| `failsafePercent` | `double` | If there is a fan PID, it will use this value if the zone goes into fail-safe as the output value written to the fan's sensors.|
The `id` field here is used in the d-bus path to talk to the
`xyz.openbmc_project.Control.Mode` interface.
@@ -175,8 +170,7 @@
| field | type | meaning |
| -------------------- | -------- | ----------------------------------------- |
-| `samplePeriod` | `double` | How frequently the value is sampled. 0.1 |
-: : : for fans, 1.0 for temperatures. :
+| `samplePeriod` | `double` | How frequently the value is sampled. 0.1 for fans, 1.0 for temperatures.|
| `proportionalCoeff` | `double` | The proportional coefficient. |
| `integralCoeff` | `double` | The integral coefficient. |
| `feedFwdOffsetCoeff` | `double` | The feed forward offset coefficient. |
@@ -217,11 +211,9 @@
| field | type | meaning |
| ---------- | ----------------- | ------------------------------------------- |
-| `name` | `string` | The name of the PID. This is just for |
-: : : humans and logging. :
+| `name` | `string` | The name of the PID. This is just for humans and logging.|
| `type` | `string` | `fan` |
-| `inputs` | `list of strings` | The names of the sensor(s) that are used as |
-: : : input and output for the PID loop. :
+| `inputs` | `list of strings` | The names of the sensor(s) that are used as input and output for the PID loop.|
| `setpoint` | `double` | Presently UNUSED |
| `pid` | `dictionary` | A PID dictionary detailed above. |
@@ -245,13 +237,10 @@
| field | type | meaning |
| ---------- | ----------------- | ------------------------------------------- |
-| `name` | `string` | The name of the PID. This is just for |
-: : : humans and logging. :
+| `name` | `string` | The name of the PID. This is just for humans and logging.|
| `type` | `string` | `margin` |
-| `inputs` | `list of strings` | The names of the sensor(s) that are used as |
-: : : input for the PID loop. :
-| `setpoint` | `double` | The setpoint value for the thermal PID. The |
-: : : setpoint for the margin sensors. :
+| `inputs` | `list of strings` | The names of the sensor(s) that are used as input for the PID loop.|
+| `setpoint` | `double` | The setpoint value for the thermal PID. The setpoint for the margin sensors.|
| `pid` | `dictionary` | A PID dictionary detailed above. |
The output of a `margin` PID loop is that it sets the setpoint value for the