Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-power / 01bc612007c0248745a90f857fb9f72ba1586407
commit01bc612007c0248745a90f857fb9f72ba1586407[log] [tgz]
authorMatthew Barth <msbarth@us.ibm.com>Wed Jan 29 11:35:04 2020 -0600
committerMatthew Barth <msbarth@us.ibm.com>Mon Apr 27 16:09:02 2020 -0500
treeba212dac1813c8deaa6a33a58ab8f6954d7cd963
parent0a0ef78a6e7f73a9fb876a775986cd2a6b3aad93 [diff]
regs: Add/install monitor disable service

Create a service file to call a method within the phosphor-regulators
binary to disable monitoring of the regulators. Add this service file to
be installed within the systemd services
directory(`/lib/systemd/system/`).

Tested:
    Disable of monitoring is called the earliest after a request to
poweroff

Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: Idd8ad73c807faddc90a7d86fd09da0508d5461dd
2 files changed
tree: ba212dac1813c8deaa6a33a58ab8f6954d7cd963
  1. cold-redundancy/
  2. example/
  3. org/
  4. phosphor-power-supply/
  5. phosphor-regulators/
  6. power-sequencer/
  7. power-supply/
  8. services/
  9. test/
  10. tools/
  11. .clang-format
  12. .gitignore
  13. argument.hpp
  14. device.hpp
  15. device_monitor.hpp
  16. elog-errors.hpp
  17. file.hpp
  18. gpio.cpp
  19. gpio.hpp
  20. LICENSE
  21. MAINTAINERS
  22. meson.build
  23. meson_options.txt
  24. names_values.hpp
  25. pmbus.cpp
  26. pmbus.hpp
  27. README.md
  28. types.hpp
  29. utility.cpp
  30. utility.hpp
README.md

Code for detecting and analyzing power faults on Witherspoon.

To Build

To build this package, do the following steps:

    1. meson build
    2. ninja -C build

To clean the repository again run `rm -rf build`.

Power Supply Monitor and Util JSON config

Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:

  • Where to access the pmbus attributes
  • Which attribute file in pmbus maps to which property and interface in D-Bus
  • Which kernel device directory is used on which PSU

There is an example psu.json to describe the necessary configurations.

  • inventoryPMBusAccessType defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:
    • Base: The base dir, e.g. /sys/bus/i2c/devices/3-0069/
    • Hwmon: The hwmon dir, e.g. /sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
    • Debug: The pmbus debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/
    • DeviceDebug: The device debug dir, e.g. '/sys/kernel/debug/./`
    • HwmonDeviceDebug: The hwmon device debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/cffps1/
  • fruConfigs defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number attribute file from a directory specified by the above pmbus access type, and assign to PartNumber property in xyz.openbmc_project.Inventory.Decorator.Asset interface.
      "fruConfigs": [
    {
      "propertyName": "PartNumber",
      "fileName": "part_number",
      "interface": "xyz.openbmc_project.Inventory.Decorator.Asset"
    }
  ]
  • psuDevices defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0's device is located in /sys/bus/i2c/devices/3-0069.
      "psuDevices": {
    "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069",
  }