diff --git a/phosphor-regulators/config_files/ibm_bonnell.json b/phosphor-regulators/config_files/ibm_bonnell.json
index 3d6a561..4bf42a1 100644
--- a/phosphor-regulators/config_files/ibm_bonnell.json
+++ b/phosphor-regulators/config_files/ibm_bonnell.json
@@ -1,94 +1,105 @@
 {
-  "comments": [ "phosphor-regulators configuration file for IBM Bonnell systems" ],
+    "comments": [
+        "phosphor-regulators configuration file for IBM Bonnell systems"
+    ],
 
-
-  "rules": [
-    {
-      "comments": [ "Rule to set PMBus PAGE to 0" ],
-      "id": "set_page0_rule",
-      "actions": [
-        { "i2c_write_byte": { "register": "0x00", "value": "0x00" } }
-      ]
-    },
-
-
-    {
-      "comments": [ "Rule to set PMBus PAGE to 1" ],
-      "id": "set_page1_rule",
-      "actions": [
-        { "i2c_write_byte": { "register": "0x00", "value": "0x01" } }
-      ]
-    },
-
-
-    {
-      "comments": [ "Rule to set output voltage of a PMBus regulator" ],
-      "id": "set_voltage_rule",
-      "actions": [
+    "rules": [
         {
-          "comments": [ "Write volts value to VOUT_COMMAND in linear format.",
+            "comments": ["Rule to set PMBus PAGE to 0"],
+            "id": "set_page0_rule",
+            "actions": [
+                { "i2c_write_byte": { "register": "0x00", "value": "0x00" } }
+            ]
+        },
+
+        {
+            "comments": ["Rule to set PMBus PAGE to 1"],
+            "id": "set_page1_rule",
+            "actions": [
+                { "i2c_write_byte": { "register": "0x00", "value": "0x01" } }
+            ]
+        },
+
+        {
+            "comments": ["Rule to set output voltage of a PMBus regulator"],
+            "id": "set_voltage_rule",
+            "actions": [
+                {
+                    "comments": [
+                        "Write volts value to VOUT_COMMAND in linear format.",
                         "Get volts value from configuration.  Get exponent",
-                        "from VOUT_MODE.  Verify write was successful." ],
-          "pmbus_write_vout_command": { "format": "linear", "is_verified": true }
-        }
-      ]
-    },
-
-
-    {
-      "comments": [ "Rule to set output voltage of PAGE 0 of a PMBus regulator" ],
-      "id": "set_voltage_page0_rule",
-      "actions": [
-        { "run_rule": "set_page0_rule" },
-        { "run_rule": "set_voltage_rule" }
-      ]
-    },
-
-
-    {
-      "comments": [ "Rule to set output voltage of PAGE 1 of a PMBus regulator" ],
-      "id": "set_voltage_page1_rule",
-      "actions": [
-        { "run_rule": "set_page1_rule" },
-        { "run_rule": "set_voltage_rule" }
-      ]
-    },
-
-
-    {
-      "comments": [ "Rule to set output voltage of a PMBus regulator using",
-                    "PMBus OPERATION and VOUT_COMMAND" ],
-      "id": "set_operation_and_voltage_rule",
-      "actions": [
-        {
-          "comments": [ "Set PMBus OPERATION to 0x80 indicating output voltage",
-                        "is set by the PMBus VOUT_COMMAND" ],
-          "i2c_write_byte": { "register": "0x01", "value": "0x80" }
+                        "from VOUT_MODE.  Verify write was successful."
+                    ],
+                    "pmbus_write_vout_command": {
+                        "format": "linear",
+                        "is_verified": true
+                    }
+                }
+            ]
         },
 
         {
-          "comments": [ "Set the output voltage using the PMBus VOUT_COMMAND" ],
-          "run_rule": "set_voltage_rule"
+            "comments": [
+                "Rule to set output voltage of PAGE 0 of a PMBus regulator"
+            ],
+            "id": "set_voltage_page0_rule",
+            "actions": [
+                { "run_rule": "set_page0_rule" },
+                { "run_rule": "set_voltage_rule" }
+            ]
         },
 
         {
-          "comments": [ "Set PMBus OPERATION to 0xB0 indicating output voltage",
+            "comments": [
+                "Rule to set output voltage of PAGE 1 of a PMBus regulator"
+            ],
+            "id": "set_voltage_page1_rule",
+            "actions": [
+                { "run_rule": "set_page1_rule" },
+                { "run_rule": "set_voltage_rule" }
+            ]
+        },
+
+        {
+            "comments": [
+                "Rule to set output voltage of a PMBus regulator using",
+                "PMBus OPERATION and VOUT_COMMAND"
+            ],
+            "id": "set_operation_and_voltage_rule",
+            "actions": [
+                {
+                    "comments": [
+                        "Set PMBus OPERATION to 0x80 indicating output voltage",
+                        "is set by the PMBus VOUT_COMMAND"
+                    ],
+                    "i2c_write_byte": { "register": "0x01", "value": "0x80" }
+                },
+
+                {
+                    "comments": [
+                        "Set the output voltage using the PMBus VOUT_COMMAND"
+                    ],
+                    "run_rule": "set_voltage_rule"
+                },
+
+                {
+                    "comments": [
+                        "Set PMBus OPERATION to 0xB0 indicating output voltage",
                         "will now be set by AVSBus (AVS_VOUT_COMMAND).",
                         "Hardware settings cause the VOUT_COMMAND value to be",
-                        "the initial voltage value for AVSBus." ],
-          "i2c_write_byte": { "register": "0x01", "value": "0xB0" }
+                        "the initial voltage value for AVSBus."
+                    ],
+                    "i2c_write_byte": { "register": "0x01", "value": "0xB0" }
+                }
+            ]
         }
-      ]
-    }
-  ],
+    ],
 
-
-  "chassis": [
-    {
-      "comments": [ "Chassis (drawer) 1",
-                    "Note: Devices not defined yet" ],
-      "number": 1,
-      "inventory_path": "system/chassis"
-    }
-  ]
+    "chassis": [
+        {
+            "comments": ["Chassis (drawer) 1", "Note: Devices not defined yet"],
+            "number": 1,
+            "inventory_path": "system/chassis"
+        }
+    ]
 }