diff --git a/phosphor-power-sequencer/src/meson.build b/phosphor-power-sequencer/src/meson.build
index c1fa67c..65146ad 100644
--- a/phosphor-power-sequencer/src/meson.build
+++ b/phosphor-power-sequencer/src/meson.build
@@ -6,6 +6,7 @@
 phosphor_power_sequencer_library = static_library(
     'phosphor-power-sequencer',
     'config_file_parser.cpp',
+    'rail.cpp',
     'services.cpp',
     implicit_include_directories: false,
     dependencies: [
diff --git a/phosphor-power-sequencer/src/power_sequencer_device.hpp b/phosphor-power-sequencer/src/power_sequencer_device.hpp
index e7ec274..26e7c6a 100644
--- a/phosphor-power-sequencer/src/power_sequencer_device.hpp
+++ b/phosphor-power-sequencer/src/power_sequencer_device.hpp
@@ -19,7 +19,6 @@
 
 #include <cstdint>
 #include <map>
-#include <stdexcept>
 #include <string>
 #include <vector>
 
@@ -122,20 +121,6 @@
     virtual double getVoutUVFaultLimit(uint8_t page) = 0;
 
     /**
-     * Returns the value of the PMBus VOUT_OV_FAULT_LIMIT command for the
-     * specified PMBus page.
-     *
-     * The returned value is in Volts.
-     *
-     * Throws an exception if the value could not be obtained or the device does
-     * not support the VOUT_OV_FAULT_LIMIT command.
-     *
-     * @param page PMBus page
-     * @return VOUT_OV_FAULT_LIMIT value in volts
-     */
-    virtual double getVoutOVFaultLimit(uint8_t page) = 0;
-
-    /**
      * Returns whether a pgood fault has occurred on one of the rails being
      * monitored by this device.
      *
diff --git a/phosphor-power-sequencer/src/rail.cpp b/phosphor-power-sequencer/src/rail.cpp
new file mode 100644
index 0000000..7355b9a
--- /dev/null
+++ b/phosphor-power-sequencer/src/rail.cpp
@@ -0,0 +1,284 @@
+/**
+ * Copyright © 2024 IBM Corporation
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "rail.hpp"
+
+#include "pmbus.hpp"
+
+#include <exception>
+#include <format>
+
+namespace phosphor::power::sequencer
+{
+namespace status_vout = phosphor::pmbus::status_vout;
+
+bool Rail::isPresent(Services& services)
+{
+    // Initially assume rail is present
+    bool present{true};
+
+    // If presence data member contains an inventory path to check
+    if (presence)
+    {
+        const std::string& inventoryPath = *presence;
+        try
+        {
+            present = services.isPresent(inventoryPath);
+        }
+        catch (const std::exception& e)
+        {
+            throw std::runtime_error{std::format(
+                "Unable to determine presence of rail {} using inventory path {}: {}",
+                name, inventoryPath, e.what())};
+        }
+    }
+
+    return present;
+}
+
+uint16_t Rail::getStatusWord(PowerSequencerDevice& device)
+{
+    uint16_t value{0};
+    try
+    {
+        verifyHasPage();
+        value = device.getStatusWord(*page);
+    }
+    catch (const std::exception& e)
+    {
+        throw std::runtime_error{
+            std::format("Unable to read STATUS_WORD value for rail {}: {}",
+                        name, e.what())};
+    }
+    return value;
+}
+
+uint8_t Rail::getStatusVout(PowerSequencerDevice& device)
+{
+    uint8_t value{0};
+    try
+    {
+        verifyHasPage();
+        value = device.getStatusVout(*page);
+    }
+    catch (const std::exception& e)
+    {
+        throw std::runtime_error{
+            std::format("Unable to read STATUS_VOUT value for rail {}: {}",
+                        name, e.what())};
+    }
+    return value;
+}
+
+double Rail::getReadVout(PowerSequencerDevice& device)
+{
+    double value{0.0};
+    try
+    {
+        verifyHasPage();
+        value = device.getReadVout(*page);
+    }
+    catch (const std::exception& e)
+    {
+        throw std::runtime_error{std::format(
+            "Unable to read READ_VOUT value for rail {}: {}", name, e.what())};
+    }
+    return value;
+}
+
+double Rail::getVoutUVFaultLimit(PowerSequencerDevice& device)
+{
+    double value{0.0};
+    try
+    {
+        verifyHasPage();
+        value = device.getVoutUVFaultLimit(*page);
+    }
+    catch (const std::exception& e)
+    {
+        throw std::runtime_error{std::format(
+            "Unable to read VOUT_UV_FAULT_LIMIT value for rail {}: {}", name,
+            e.what())};
+    }
+    return value;
+}
+
+bool Rail::hasPgoodFault(PowerSequencerDevice& device, Services& services,
+                         const std::vector<int>& gpioValues,
+                         std::map<std::string, std::string>& additionalData)
+{
+    // If rail is not present, return false and don't check anything else
+    if (!isPresent(services))
+    {
+        services.logInfoMsg(std::format("Rail {} is not present", name));
+        return false;
+    }
+
+    // Check if STATUS_VOUT indicates a pgood fault occurred
+    bool hasFault = hasPgoodFaultStatusVout(device, services, additionalData);
+
+    // Check if a GPIO value indicates a pgood fault occurred
+    if (!hasFault)
+    {
+        hasFault = hasPgoodFaultGPIO(services, gpioValues, additionalData);
+    }
+
+    // Check if output voltage is below UV limit indicating pgood fault occurred
+    if (!hasFault)
+    {
+        hasFault = hasPgoodFaultOutputVoltage(device, services, additionalData);
+    }
+
+    // If fault detected, store debug data in additional data map
+    if (hasFault)
+    {
+        services.logErrorMsg(
+            std::format("Pgood fault detected in rail {}", name));
+        storePgoodFaultDebugData(device, services, additionalData);
+    }
+
+    return hasFault;
+}
+
+void Rail::verifyHasPage()
+{
+    if (!page)
+    {
+        throw std::runtime_error{
+            std::format("No PAGE number defined for rail {}", name)};
+    }
+}
+
+bool Rail::hasPgoodFaultStatusVout(
+    PowerSequencerDevice& device, Services& services,
+    std::map<std::string, std::string>& additionalData)
+{
+    bool hasFault{false};
+
+    // If we are checking the value of STATUS_VOUT for the rail
+    if (checkStatusVout)
+    {
+        // Read STATUS_VOUT value from device
+        uint8_t statusVout = getStatusVout(device);
+
+        // Check if fault (non-warning) bits are set in value
+        if (statusVout & ~status_vout::WARNING_MASK)
+        {
+            hasFault = true;
+            services.logErrorMsg(std::format(
+                "Rail {} has fault bits set in STATUS_VOUT: {:#04x}", name,
+                statusVout));
+            additionalData.emplace("STATUS_VOUT",
+                                   std::format("{:#04x}", statusVout));
+        }
+        else if (statusVout != 0)
+        {
+            services.logInfoMsg(std::format(
+                "Rail {} has warning bits set in STATUS_VOUT: {:#04x}", name,
+                statusVout));
+        }
+    }
+
+    return hasFault;
+}
+
+bool Rail::hasPgoodFaultGPIO(Services& services,
+                             const std::vector<int>& gpioValues,
+                             std::map<std::string, std::string>& additionalData)
+{
+    bool hasFault{false};
+
+    // If a GPIO is defined for checking pgood status
+    if (gpio)
+    {
+        // Get GPIO value
+        unsigned int line = gpio->line;
+        bool activeLow = gpio->activeLow;
+        if (line >= gpioValues.size())
+        {
+            throw std::runtime_error{std::format(
+                "Invalid GPIO line offset {} for rail {}: Device only has {} GPIO values",
+                line, name, gpioValues.size())};
+        }
+        int value = gpioValues[line];
+
+        // Check if value indicates pgood signal is not active
+        if ((activeLow && (value == 1)) || (!activeLow && (value == 0)))
+        {
+            hasFault = true;
+            services.logErrorMsg(std::format(
+                "Rail {} pgood GPIO line offset {} has inactive value {}", name,
+                line, value));
+            additionalData.emplace("GPIO_LINE", std::format("{}", line));
+            additionalData.emplace("GPIO_VALUE", std::format("{}", value));
+        }
+    }
+
+    return hasFault;
+}
+
+bool Rail::hasPgoodFaultOutputVoltage(
+    PowerSequencerDevice& device, Services& services,
+    std::map<std::string, std::string>& additionalData)
+{
+    bool hasFault{false};
+
+    // If we are comparing output voltage to UV limit to check pgood status
+    if (compareVoltageToLimit)
+    {
+        // Read output voltage and UV fault limit values from device
+        double vout = getReadVout(device);
+        double uvLimit = getVoutUVFaultLimit(device);
+
+        // If output voltage is at or below UV fault limit
+        if (vout <= uvLimit)
+        {
+            hasFault = true;
+            services.logErrorMsg(std::format(
+                "Rail {} output voltage {}V is <= UV fault limit {}V", name,
+                vout, uvLimit));
+            additionalData.emplace("READ_VOUT", std::format("{}", vout));
+            additionalData.emplace("VOUT_UV_FAULT_LIMIT",
+                                   std::format("{}", uvLimit));
+        }
+    }
+
+    return hasFault;
+}
+
+void Rail::storePgoodFaultDebugData(
+    PowerSequencerDevice& device, Services& services,
+    std::map<std::string, std::string>& additionalData)
+{
+    additionalData.emplace("RAIL_NAME", name);
+    if (page)
+    {
+        try
+        {
+            uint16_t statusWord = getStatusWord(device);
+            services.logInfoMsg(
+                std::format("Rail {} STATUS_WORD: {:#06x}", name, statusWord));
+            additionalData.emplace("STATUS_WORD",
+                                   std::format("{:#06x}", statusWord));
+        }
+        catch (...)
+        {
+            // Ignore error; don't interrupt pgood fault handling
+        }
+    }
+}
+
+} // namespace phosphor::power::sequencer
diff --git a/phosphor-power-sequencer/src/rail.hpp b/phosphor-power-sequencer/src/rail.hpp
index a0115e5..5a49e13 100644
--- a/phosphor-power-sequencer/src/rail.hpp
+++ b/phosphor-power-sequencer/src/rail.hpp
@@ -15,10 +15,15 @@
  */
 #pragma once
 
+#include "power_sequencer_device.hpp"
+#include "services.hpp"
+
 #include <cstdint>
+#include <map>
 #include <optional>
 #include <stdexcept>
 #include <string>
+#include <vector>
 
 namespace phosphor::power::sequencer
 {
@@ -93,7 +98,7 @@
         compareVoltageToLimit{compareVoltageToLimit}, gpio{gpio}
     {
         // If checking STATUS_VOUT or output voltage, verify PAGE was specified
-        if ((checkStatusVout || compareVoltageToLimit) && !page.has_value())
+        if ((checkStatusVout || compareVoltageToLimit) && !page)
         {
             throw std::invalid_argument{"PMBus PAGE is required"};
         }
@@ -172,8 +177,158 @@
         return gpio;
     }
 
+    /**
+     * Returns whether the rail is present.
+     *
+     * Returns true if no inventory path was specified for presence detection.
+     *
+     * @param services System services like hardware presence and the journal
+     * @return true if rail is present, false otherwise
+     */
+    bool isPresent(Services& services);
+
+    /**
+     * Returns the value of the PMBus STATUS_WORD command for the rail.
+     *
+     * Reads the value from the specified device.  The returned value is in
+     * host-endian order.
+     *
+     * Throws an exception if the value could not be obtained.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @return STATUS_WORD value
+     */
+    uint16_t getStatusWord(PowerSequencerDevice& device);
+
+    /**
+     * Returns the value of the PMBus STATUS_VOUT command for the rail.
+     *
+     * Reads the value from the specified device.
+     *
+     * Throws an exception if the value could not be obtained.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @return STATUS_VOUT value
+     */
+    uint8_t getStatusVout(PowerSequencerDevice& device);
+
+    /**
+     * Returns the value of the PMBus READ_VOUT command for the rail.
+     *
+     * Reads the value from the specified device.  The returned value is in
+     * volts.
+     *
+     * Throws an exception if the value could not be obtained.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @return READ_VOUT value in volts
+     */
+    double getReadVout(PowerSequencerDevice& device);
+
+    /**
+     * Returns the value of the PMBus VOUT_UV_FAULT_LIMIT command for the rail.
+     *
+     * Reads the value from the specified device.  The returned value is in
+     * volts.
+     *
+     * Throws an exception if the value could not be obtained.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @return VOUT_UV_FAULT_LIMIT value in volts
+     */
+    double getVoutUVFaultLimit(PowerSequencerDevice& device);
+
+    /**
+     * Returns whether a pgood (power good) fault has occurred on the rail.
+     *
+     * Throws an exception if an error occurs while trying to obtain the rail
+     * status.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @param services System services like hardware presence and the journal
+     * @param gpioValues GPIO values obtained from the device (if any)
+     * @param additionalData Additional data to include in an error log if this
+     *                       method returns true
+     * @return true if a pgood fault was found on the rail, false otherwise
+     */
+    bool hasPgoodFault(PowerSequencerDevice& device, Services& services,
+                       const std::vector<int>& gpioValues,
+                       std::map<std::string, std::string>& additionalData);
+
   private:
     /**
+     * Verifies that a PMBus PAGE number is defined for the rail.
+     *
+     * Throws an exception if a PAGE number is not defined.
+     */
+    void verifyHasPage();
+
+    /**
+     * Returns whether the PMBus STATUS_VOUT command indicates a pgood fault
+     * has occurred on the rail.
+     *
+     * Throws an exception if an error occurs while trying to obtain the rail
+     * status.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @param services System services like hardware presence and the journal
+     * @param additionalData Additional data to include in an error log if this
+     *                       method returns true
+     * @return true if a pgood fault was found on the rail, false otherwise
+     */
+    bool hasPgoodFaultStatusVout(
+        PowerSequencerDevice& device, Services& services,
+        std::map<std::string, std::string>& additionalData);
+
+    /**
+     * Returns whether a GPIO value indicates a pgood fault has occurred on the
+     * rail.
+     *
+     * Throws an exception if an error occurs while trying to obtain the rail
+     * status.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @param gpioValues GPIO values obtained from the device (if any)
+     * @param additionalData Additional data to include in an error log if this
+     *                       method returns true
+     * @return true if a pgood fault was found on the rail, false otherwise
+     */
+    bool hasPgoodFaultGPIO(Services& services,
+                           const std::vector<int>& gpioValues,
+                           std::map<std::string, std::string>& additionalData);
+
+    /**
+     * Returns whether the output voltage is below the undervoltage limit
+     * indicating a pgood fault has occurred on the rail.
+     *
+     * Throws an exception if an error occurs while trying to obtain the rail
+     * status.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @param services System services like hardware presence and the journal
+     * @param additionalData Additional data to include in an error log if this
+     *                       method returns true
+     * @return true if a pgood fault was found on the rail, false otherwise
+     */
+    bool hasPgoodFaultOutputVoltage(
+        PowerSequencerDevice& device, Services& services,
+        std::map<std::string, std::string>& additionalData);
+
+    /**
+     * Store pgood fault debug data in the specified additional data map.
+     *
+     * Stores data that is relevant regardless of which method was used to
+     * detect the pgood fault.
+     *
+     * @param device Power sequencer device that enables and monitors the rail
+     * @param services System services like hardware presence and the journal
+     * @param additionalData Additional data to include in an error log
+     */
+    void storePgoodFaultDebugData(
+        PowerSequencerDevice& device, Services& services,
+        std::map<std::string, std::string>& additionalData);
+
+    /**
      * Unique name for the rail.
      */
     std::string name{};