commit | 2f9e14f632d733dc05cdb4425b49f33243d7a209 | [log] [tgz] |
---|---|---|
author | Shawn McCarney <shawnmm@us.ibm.com> | Thu Apr 29 02:45:18 2021 -0500 |
committer | Shawn McCarney <shawnmm@us.ibm.com> | Thu Apr 29 11:41:38 2021 -0500 |
tree | bb5ceaa633025d3d707bc0839b975cbef0ecd90f | |
parent | 5135df6333f7f2a8b328f148c6443727e15b7873 [diff] |
regulators: Convert to new SensorType enumeration There are several types of voltage regulator sensors, such as vout, iout, and temperature. The sensor types were previously defined by the enumeration pmbus_utils::SensorValueType. This enumeration should not have been placed in the pmbus_utils namespace because it is not specific to PMBus. A new enumeration with the simpler name SensorType was created in sensors.hpp in a previous commit. Remove the old enumeration from pmbus_utils. Convert affected files to use the new enumeration. Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com> Change-Id: I4136b392b104edd3eee41ec29c779ad084c7c4de
This repository contains applications for configuring and monitoring devices that deliver power to the system.
To build all applications in this repository:
meson build ninja -C build
To clean the repository and remove all build output:
rm -rf build
You can specify meson options to customize the build process. For example, you can specify:
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }