commit | 3d1ebcb4d29015a3ca99c7037b5476aa8ae4b5fe | [log] [tgz] |
---|---|---|
author | Lei YU <mine260309@gmail.com> | Mon Jan 06 10:50:32 2020 +0800 |
committer | Lei YU <mine260309@gmail.com> | Mon Jan 20 03:05:32 2020 +0000 |
tree | 68ccb47f70535fc8ec6f15f83c4d8c5f07500fe8 | |
parent | 5cc0128068ef5fcfd49e99099a5d6339cd69f272 [diff] |
power-supply: Remove version interface In power supply monitor, a version interface is created in the PSU object in inventory (/xyz/openbmc_project/inventory). With PSU code manager implemented in OpenBMC, the version object is created under software (/xyz/openbmc_project/software), so the version interface in inventory is not necessary anymore. Tested: Verify the version and purpose do not exist anymore in /xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply[0|1] on Witherspoon, after factory reset. Signed-off-by: Lei YU <mine260309@gmail.com> Change-Id: If61762a79195998a25c56aeec50af724f049ab4f
Code for detecting and analyzing power faults on Witherspoon.
To build this package, do the following steps: 1. meson build 2. ninja -C build To clean the repository again run `rm -rf build`.
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }