Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-power / 726e1cad1749229f6109ebba72f60f2239f7eff9
commit726e1cad1749229f6109ebba72f60f2239f7eff9[log] [tgz]
authorShawn McCarney <shawnmm@us.ibm.com>Fri Jun 21 14:58:37 2024 -0500
committerShawn McCarney <shawnmm@us.ibm.com>Fri Jun 21 14:58:37 2024 -0500
treed4630e075b978565e3f813a8ce6b09ea06d86ce5
parent1838dbf934e4788c613b8b106f2d9cc1382d30b9 [diff]
pseq: Add config files for Fuji systems

Add phosphor-power-sequencer JSON configuration files for Fuji systems.

Add config files in both the old and new JSON formats.  The old format
will be removed soon, but that has not occurred yet.

Tested:
* Tested in simulation environment
* Verified Fuji JSON files present in
  /usr/share/phosphor-power-sequencer directory in firmware image
* Verified old format Fuji JSON file was found and loaded successfully
* Powered on chassis
  * Verified powered on successfully and chassis pgood was true
  * Verified no errors logged
  * Verified phosphor-power-control did not write any errors to the
    journal
* Powered off chassis
  * Verified powered off successfully and chassis pgood was false
  * Verified no errors logged
  * Verified phosphor-power-control did not write any errors to the
    journal

Change-Id: I739ca7d387af07fc0659d0e28ba366b01342a1b2
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
2 files changed
tree: d4630e075b978565e3f813a8ce6b09ea06d86ce5
  1. cold-redundancy/
  2. example/
  3. org/
  4. phosphor-power-sequencer/
  5. phosphor-power-supply/
  6. phosphor-regulators/
  7. power-sequencer/
  8. power-supply/
  9. services/
  10. subprojects/
  11. test/
  12. tools/
  13. .clang-format
  14. .gitignore
  15. .shellcheck
  16. compatible_system_types_finder.cpp
  17. compatible_system_types_finder.hpp
  18. dbus_interfaces_finder.cpp
  19. dbus_interfaces_finder.hpp
  20. device.hpp
  21. device_monitor.hpp
  22. elog-errors.hpp
  23. file_descriptor.hpp
  24. gpio.cpp
  25. gpio.hpp
  26. LICENSE
  27. meson.build
  28. meson.options
  29. names_values.hpp
  30. OWNERS
  31. pmbus.cpp
  32. pmbus.hpp
  33. README.md
  34. temporary_file.cpp
  35. temporary_file.hpp
  36. temporary_subdirectory.cpp
  37. temporary_subdirectory.hpp
  38. types.hpp
  39. utility.cpp
  40. utility.hpp
README.md

Overview

This repository contains applications for configuring and monitoring devices that deliver power to the system.

  • cold-redundancy: Application that makes power supplies work in Cold Redundancy mode and rotates them at intervals.
  • phosphor-power-sequencer: Applications for configuring and monitoring power sequencer and related devices that support JSON-driven configuration.
  • phosphor-power-supply: Next generation power supply monitoring application.
  • phosphor-regulators: JSON-driven application that configures and monitors voltage regulators.
  • power-sequencer: A power sequencer monitoring application.
  • power-supply: Original power supply monitoring application.
  • tools/power-utils: Power supply utilities.

Build

To build all applications in this repository:

  meson setup build
  ninja -C build

To clean the repository and remove all build output:

  rm -rf build

You can specify meson options to customize the build process. For example, you can specify:

  • Which applications to build and install.
  • Application-specific configuration data, such as power sequencer type.
  • Whether to build tests.

Power Supply Monitor and Util JSON config

Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:

  • Where to access the pmbus attributes
  • Which attribute file in pmbus maps to which property and interface in D-Bus
  • Which kernel device directory is used on which PSU

There is an example psu.json to describe the necessary configurations.

  • inventoryPMBusAccessType defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:
    • Base: The base dir, e.g. /sys/bus/i2c/devices/3-0069/
    • Hwmon: The hwmon dir, e.g. /sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
    • Debug: The pmbus debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/
    • DeviceDebug: The device debug dir, e.g. '/sys/kernel/debug/./`
    • HwmonDeviceDebug: The hwmon device debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/cffps1/
  • fruConfigs defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number attribute file from a directory specified by the above pmbus access type, and assign to PartNumber property in xyz.openbmc_project.Inventory.Decorator.Asset interface.
      "fruConfigs": [
    {
      "propertyName": "PartNumber",
      "fileName": "part_number",
      "interface": "xyz.openbmc_project.Inventory.Decorator.Asset"
    }
  ]
  • psuDevices defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0's device is located in /sys/bus/i2c/devices/3-0069.
      "psuDevices": {
    "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069",
  }