commit | 8270b7d1f344477176eba6f18d3b698e9cebe3e3 | [log] [tgz] |
---|---|---|
author | Shawn McCarney <shawnmm@us.ibm.com> | Mon Jun 26 11:35:51 2023 -0500 |
committer | Shawn McCarney <shawnmm@us.ibm.com> | Mon Jun 26 16:02:44 2023 -0500 |
tree | 7bc214ed67104203d25c6d9f71a08315d50124c7 | |
parent | c48551abf53ce0c8b82dd4745e39e379e299192c [diff] |
Support multiple D-Bus interfaces in getSubTree() The utility function getSubTree() only allows a single D-Bus interface to be specified. This does not match the corresponding GetSubTree D-Bus method, which allows multiple D-Bus interfaces to be specified. Add a getSubTree() overload that accepts multiple D-Bus interfaces. Tested: * Existing getSubTree() function * Test where it is successful * Test where it fails due to a D-Bus error * New getSubTree() function * Test where zero interfaces are specified * Test where one interface is specified * Test where multiple interfaces are specified * Test where it is successful * Test where it fails due to a D-Bus error Change-Id: I56e124c13bec633f7a3af80ff6d5b2014454bfb8 Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
This repository contains applications for configuring and monitoring devices that deliver power to the system.
To build all applications in this repository:
meson build ninja -C build
To clean the repository and remove all build output:
rm -rf build
You can specify meson options to customize the build process. For example, you can specify:
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }