commit | 91f87a569af0b094c7522dd2e2e1fe2b781e4156 | [log] [tgz] |
---|---|---|
author | Shawn McCarney <shawnmm@us.ibm.com> | Tue Sep 07 09:59:57 2021 -0500 |
committer | Shawn McCarney <shawnmm@us.ibm.com> | Wed Sep 08 16:35:19 2021 +0000 |
tree | 3cde2458e3b62c06f815cb34f1bf0474d13c73af | |
parent | 9284c307aee009c632162fc564c3f83b4429378b [diff] |
regulators: Add i2c_capture_bytes to parser Enhance the JSON configuration file parser to support the new i2c_capture_bytes action. Add gtest test cases to exercise new code. Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com> Change-Id: I92f50fe3df9b3469e16e03b04ae5d0df464eb3e2
This repository contains applications for configuring and monitoring devices that deliver power to the system.
To build all applications in this repository:
meson build ninja -C build
To clean the repository and remove all build output:
rm -rf build
You can specify meson options to customize the build process. For example, you can specify:
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }