commit | 9b86852ed208d7a5744458566818ba37bf6b09b5 | [log] [tgz] |
---|---|---|
author | Brandon Wyman <bjwyman@gmail.com> | Tue Nov 24 18:27:45 2020 -0600 |
committer | B. J. Wyman <bjwyman@gmail.com> | Thu Dec 17 21:45:25 2020 +0000 |
tree | 1a9048387e72901dca2f0f05b118cfc59cb8c2f7 | |
parent | 8429e884ac321ce314436c33d87f412d5279cfe5 [diff] |
psu-ng: Wait for inventory manager The phosphor-psu-monitor application should wait for the inventory manager service. It more specifically needs to wait until the inventory manager service has created the object path that the power supplies will be under. Those are needed by the phosphor-gpio-presence service(s) in order to create/update power supply objects with an updated Present property based on the GPIO presence line state. Remove the unnecessary wait for obmc-mapper.target. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Change-Id: I547ed4ee8f4d6d9ae7e4a7f1becc59d0ebd4ba00
This repository contains applications for configuring and monitoring devices that deliver power to the system.
To build all applications in this repository:
meson build ninja -C build
To clean the repository and remove all build output:
rm -rf build
You can specify meson options to customize the build process. For example, you can specify:
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }