commit | 9e706622b470aa112758729b8db0747f0000a01b | [log] [tgz] |
---|---|---|
author | Shawn McCarney <shawnmm@us.ibm.com> | Mon Jun 17 17:33:54 2024 -0500 |
committer | Shawn McCarney <shawnmm@us.ibm.com> | Tue Jul 02 17:12:07 2024 +0000 |
tree | 0c5b239d885f6593e24903695220ff2256d28166 | |
parent | 92420f26924ca193c18d913ce6bfeb7df99f5cc9 [diff] |
regulators: Initial BlueRidge config file Create the initial voltage regulator JSON configuration file for BlueRidge systems. Tested: * Ran JSON validation tool * Set up BlueRidge simulation environment * Verified regulators application found and loaded the file * Powered chassis on and off and verified no errors were logged Change-Id: I05a868f7656f76de8543683e9c9e14eaa3d4b70b Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
This repository contains applications for configuring and monitoring devices that deliver power to the system.
To build all applications in this repository:
meson setup build ninja -C build
To clean the repository and remove all build output:
rm -rf build
You can specify meson options to customize the build process. For example, you can specify:
Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:
There is an example psu.json to describe the necessary configurations.
inventoryPMBusAccessType
defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:/sys/bus/i2c/devices/3-0069/
/sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/
/sys/kernel/debug/pmbus/hwmonX/cffps1/
fruConfigs
defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number
attribute file from a directory specified by the above pmbus access type, and assign to PartNumber
property in xyz.openbmc_project.Inventory.Decorator.Asset
interface."fruConfigs": [ { "propertyName": "PartNumber", "fileName": "part_number", "interface": "xyz.openbmc_project.Inventory.Decorator.Asset" } ]
psuDevices
defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0
's device is located in /sys/bus/i2c/devices/3-0069
."psuDevices": { "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069", }