diff --git a/power-supply/power_supply.cpp b/power-supply/power_supply.cpp
index 0bdbbfa..670065b 100644
--- a/power-supply/power_supply.cpp
+++ b/power-supply/power_supply.cpp
@@ -81,6 +81,23 @@
     updatePowerState();
 }
 
+void PowerSupply::captureCmd(util::NamesValues& nv, const std::string& cmd,
+                             witherspoon::pmbus::Type type)
+{
+    if (pmbusIntf.exists(cmd, type))
+    {
+        try
+        {
+            auto val = pmbusIntf.read(cmd, type);
+            nv.add(cmd, val);
+        }
+        catch (std::exception& e)
+        {
+            log<level::INFO>("Unable to capture metadata", entry("CMD=%s",
+                                                                 cmd));
+        }
+    }
+}
 
 void PowerSupply::analyze()
 {
@@ -281,11 +298,9 @@
     {
         inputFault = true;
 
-        statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
-
         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
-        nv.add("STATUS_INPUT", statusInput);
+        captureCmd(nv, STATUS_INPUT, Type::Debug);
 
         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyInputFault;
@@ -313,28 +328,18 @@
 {
     using namespace witherspoon::pmbus;
 
-    std::uint8_t  statusInput = 0;
-    std::uint8_t  statusVout = 0;
-    std::uint8_t  statusIout = 0;
-    std::uint8_t  statusMFR  = 0;
-
     // Check PG# and UNIT_IS_OFF
     if (((statusWord & status_word::POWER_GOOD_NEGATED) ||
          (statusWord & status_word::UNIT_IS_OFF)) &&
         !powerOnFault)
     {
-        statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
-        auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
-        statusVout = pmbusIntf.read(status0Vout, Type::Debug);
-        statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
-        statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
-
         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
-        nv.add("STATUS_INPUT", statusInput);
-        nv.add("STATUS_VOUT", statusVout);
-        nv.add("STATUS_IOUT", statusIout);
-        nv.add("MFR_SPECIFIC", statusMFR);
+        captureCmd(nv, STATUS_INPUT, Type::Debug);
+        auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
+        captureCmd(nv, status0Vout, Type::Debug);
+        captureCmd(nv, STATUS_IOUT, Type::Debug);
+        captureCmd(nv, STATUS_MFR, Type::Debug);
 
         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyShouldBeOn;
@@ -353,27 +358,17 @@
 {
     using namespace witherspoon::pmbus;
 
-    std::uint8_t  statusInput = 0;
-    std::uint8_t  statusVout = 0;
-    std::uint8_t  statusIout = 0;
-    std::uint8_t  statusMFR  = 0;
-
     // Check for an output overcurrent fault.
     if ((statusWord & status_word::IOUT_OC_FAULT) &&
         !outputOCFault)
     {
-        statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
-        auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
-        statusVout = pmbusIntf.read(status0Vout, Type::Debug);
-        statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
-        statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
-
         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
-        nv.add("STATUS_INPUT", statusInput);
-        nv.add("STATUS_VOUT", statusVout);
-        nv.add("STATUS_IOUT", statusIout);
-        nv.add("MFR_SPECIFIC", statusMFR);
+        captureCmd(nv, STATUS_INPUT, Type::Debug);
+        auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
+        captureCmd(nv, status0Vout, Type::Debug);
+        captureCmd(nv, STATUS_IOUT, Type::Debug);
+        captureCmd(nv, STATUS_MFR, Type::Debug);
 
         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyOutputOvercurrent;
@@ -391,27 +386,17 @@
 {
     using namespace witherspoon::pmbus;
 
-    std::uint8_t  statusInput = 0;
-    std::uint8_t  statusVout = 0;
-    std::uint8_t  statusIout = 0;
-    std::uint8_t  statusMFR  = 0;
-
     // Check for an output overvoltage fault.
     if ((statusWord & status_word::VOUT_OV_FAULT) &&
         !outputOVFault)
     {
-        statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
-        auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
-        statusVout = pmbusIntf.read(status0Vout, Type::Debug);
-        statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
-        statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
-
         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
-        nv.add("STATUS_INPUT", statusInput);
-        nv.add("STATUS_VOUT", statusVout);
-        nv.add("STATUS_IOUT", statusIout);
-        nv.add("MFR_SPECIFIC", statusMFR);
+        captureCmd(nv, STATUS_INPUT, Type::Debug);
+        auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
+        captureCmd(nv, status0Vout, Type::Debug);
+        captureCmd(nv, STATUS_IOUT, Type::Debug);
+        captureCmd(nv, STATUS_MFR, Type::Debug);
 
         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyOutputOvervoltage;
@@ -429,23 +414,15 @@
 {
     using namespace witherspoon::pmbus;
 
-    std::uint8_t statusMFR  = 0;
-    std::uint8_t statusTemperature = 0;
-    std::uint8_t statusFans12 = 0;
-
     // Check for a fan fault or warning condition
     if ((statusWord & status_word::FAN_FAULT) &&
         !fanFault)
     {
-        statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
-        statusTemperature = pmbusIntf.read(STATUS_TEMPERATURE, Type::Debug);
-        statusFans12 = pmbusIntf.read(STATUS_FANS_1_2, Type::Debug);
-
         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
-        nv.add("MFR_SPECIFIC", statusMFR);
-        nv.add("STATUS_TEMPERATURE", statusTemperature);
-        nv.add("STATUS_FANS_1_2", statusFans12);
+        captureCmd(nv, STATUS_MFR, Type::Debug);
+        captureCmd(nv, STATUS_TEMPERATURE, Type::Debug);
+        captureCmd(nv, STATUS_FANS_1_2, Type::Debug);
 
         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyFanFault;
@@ -481,20 +458,12 @@
         // out less current.
         // Capture command responses with potentially relevant information,
         // and call out the power supply reporting the condition.
-        std::uint8_t statusMFR = 0;
-        std::uint8_t statusIout = 0;
-        std::uint8_t statusFans12 = 0;
-
-        statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
-        statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
-        statusFans12 = pmbusIntf.read(STATUS_FANS_1_2, Type::Debug);
-
         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
-        nv.add("MFR_SPECIFIC", statusMFR);
-        nv.add("STATUS_IOUT", statusIout);
+        captureCmd(nv, STATUS_MFR, Type::Debug);
+        captureCmd(nv, STATUS_IOUT, Type::Debug);
         nv.add("STATUS_TEMPERATURE", statusTemperature);
-        nv.add("STATUS_FANS_1_2", statusFans12);
+        captureCmd(nv, STATUS_FANS_1_2, Type::Debug);
 
         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyTemperatureFault;
diff --git a/power-supply/power_supply.hpp b/power-supply/power_supply.hpp
index 379a937..474ad8d 100644
--- a/power-supply/power_supply.hpp
+++ b/power-supply/power_supply.hpp
@@ -3,6 +3,7 @@
 #include "device.hpp"
 #include "pmbus.hpp"
 #include "timer.hpp"
+#include "names_values.hpp"
 
 namespace witherspoon
 {
@@ -201,6 +202,16 @@
         void powerStateChanged(sdbusplus::message::message& msg);
 
         /**
+         * @brief Wrapper for PMBus::read() and adding metadata
+         *
+         * @param[out] nv - NamesValues instance to store cmd string and value
+         * @param[in] cmd - String for the command to read data from.
+         * @param[in] type - The type of file to read the command from.
+         */
+        void captureCmd(util::NamesValues& nv, const std::string& cmd,
+                        witherspoon::pmbus::Type type);
+
+        /**
          * @brief Checks for input voltage faults and logs error if needed.
          *
          * Check for voltage input under voltage fault (VIN_UV_FAULT) and/or