Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / phosphor-power / abd64b949bebebe17f0b28131c1a038dd021c255
commitabd64b949bebebe17f0b28131c1a038dd021c255[log] [tgz]
authorJim Wright <jlwright@us.ibm.com>Fri Feb 11 09:56:56 2022 -0600
committerJim Wright <jlwright@us.ibm.com>Wed Feb 16 09:51:28 2022 -0600
tree83c297bd74c7d5adcad4c2e1cdfb42fd5391373e
parente4c3a299cefd56c3bfebdb7f2cb36f88b91f4981 [diff]
pseq: Clear power supply error at power on

After a successful tranisition to power on state, clear any set power
supply error. This resets the monitoring and follows the usual
assumption that hardware could have changed while the power was off.

Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I75f0f4cff91bb914d8edc422b13b4ff71267029a
1 file changed
tree: 83c297bd74c7d5adcad4c2e1cdfb42fd5391373e
  1. cold-redundancy/
  2. example/
  3. org/
  4. phosphor-power-sequencer/
  5. phosphor-power-supply/
  6. phosphor-regulators/
  7. power-sequencer/
  8. power-supply/
  9. services/
  10. test/
  11. tools/
  12. .clang-format
  13. .gitignore
  14. .shellcheck
  15. argument.hpp
  16. device.hpp
  17. device_monitor.hpp
  18. elog-errors.hpp
  19. file_descriptor.hpp
  20. gpio.cpp
  21. gpio.hpp
  22. LICENSE
  23. MAINTAINERS
  24. meson.build
  25. meson_options.txt
  26. names_values.hpp
  27. OWNERS
  28. pmbus.cpp
  29. pmbus.hpp
  30. README.md
  31. types.hpp
  32. utility.cpp
  33. utility.hpp
README.md

Overview

This repository contains applications for configuring and monitoring devices that deliver power to the system.

  • cold-redundancy: Application that makes power supplies work in Cold Redundancy mode and rotates them at intervals.
  • phosphor-power-sequencer: Applications for configuring and monitoring power sequencer and related devices that support JSON-driven configuration.
  • phosphor-power-supply: Next generation power supply monitoring application.
  • phosphor-regulators: JSON-driven application that configures and monitors voltage regulators.
  • power-sequencer: A power sequencer monitoring application.
  • power-supply: Original power supply monitoring application.
  • tools/power-utils: Power supply utilities.

Build

To build all applications in this repository:

  meson build
  ninja -C build

To clean the repository and remove all build output:

  rm -rf build

You can specify meson options to customize the build process. For example, you can specify:

  • Which applications to build and install.
  • Application-specific configuration data, such as power sequencer type.
  • Whether to build tests.

Power Supply Monitor and Util JSON config

Several applications in this repository require a PSU JSON config to run. The JSON config file provides information for:

  • Where to access the pmbus attributes
  • Which attribute file in pmbus maps to which property and interface in D-Bus
  • Which kernel device directory is used on which PSU

There is an example psu.json to describe the necessary configurations.

  • inventoryPMBusAccessType defines the pmbus access type, which tells the service which sysfs type to use to read the attributes. The possible values are:
    • Base: The base dir, e.g. /sys/bus/i2c/devices/3-0069/
    • Hwmon: The hwmon dir, e.g. /sys/bus/i2c/devices/3-0069/hwmon/hwmonX/
    • Debug: The pmbus debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/
    • DeviceDebug: The device debug dir, e.g. '/sys/kernel/debug/./`
    • HwmonDeviceDebug: The hwmon device debug dir, e.g. /sys/kernel/debug/pmbus/hwmonX/cffps1/
  • fruConfigs defines the mapping between the attribute file and the FRU inventory interface and property. The configuration example below indicates that the service will read part_number attribute file from a directory specified by the above pmbus access type, and assign to PartNumber property in xyz.openbmc_project.Inventory.Decorator.Asset interface.
      "fruConfigs": [
    {
      "propertyName": "PartNumber",
      "fileName": "part_number",
      "interface": "xyz.openbmc_project.Inventory.Decorator.Asset"
    }
  ]
  • psuDevices defines the kernel device dir for each PSU in inventory. The configuration example below indicates that powersupply0's device is located in /sys/bus/i2c/devices/3-0069.
      "psuDevices": {
    "/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0" : "/sys/bus/i2c/devices/3-0069",
  }